2-ETHYLHEXANAL Property

Melting point:

-76 °C

Boiling point:

55 °C13.5 mm Hg(lit.)

Density 

0.822 g/mL at 25 °C(lit.)

vapor pressure 

2-2.8hPa at 18.5-23.4℃

refractive index 

n20/D 1.415(lit.)

Flash point:

108 °F

storage temp. 

Flammables area

solubility 

0.01g/l

form 

Liquid

color 

Clear colorless

explosive limit

1.0-6.6%(V)

Water Solubility 

Slightly soluble in water.

Sensitive 

Air Sensitive

BRN 

1700556

Stability:

Air Sensitive

LogP

3.07 at 25℃

Surface tension

47.1mN/m at 730mg/L and 20.2℃

CAS DataBase Reference

123-05-7(CAS DataBase Reference)

EPA Substance Registry System

2-Ethylhexanal (123-05-7)

Safety

Hazard Codes 

Xi,Xn

Risk Statements 

10-36/37/38-43-38-63

Safety Statements 

26-36-36/37

RIDADR 

UN 1191 3/PG 3

WGK Germany 

1

RTECS 

MN7525000

TSCA 

Yes

HazardClass 

3

PackingGroup 

III

HS Code 

29121990

Hazardous Substances Data

123-05-7(Hazardous Substances Data)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H226Flammable liquid and vapour

H317May cause an allergic skin reaction

H361Suspected of damaging fertility or the unborn child

Precautionary statements

P201Obtain special instructions before use.

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P308+P313IF exposed or concerned: Get medical advice/attention.

2-ETHYLHEXANAL Chemical Properties,Usage,Production

Description

Ethyl hexaldehyde is a colorless liquid with amild, pleasant odor. Molecular weight = 128.24; Boilingpoint = 163℃; Flash point = 44.4℃; Autoignitiontemperature = 190℃. Explosive limits: LEL = 0.85% at93℃; UEL = 7.2% at 135℃. Hazard Identification (basedon NFPA-704 M Rating System): Health 2, Flammability 2,Reactivity 1. Slightly soluble in water.

Chemical Properties

Ethyl hexaldehyde is a colorless liquid with a mild, pleasant odor.

Chemical Properties

clear liquid

Uses

Organic synthesis, perfumes.

Uses

2-Ethylhexanal is used as an intermediate for chemical synthesis?and in the production of pharmaceuticals and odorous substances.

Uses

2-Ethylhexanal may be used as an analytical standard for the determination of the analyte in the atmosphere of charcoal plants by high-performance liquid chromatography and UV detection. It may also be used as an internal standard for the determination of the analyte from wood pellets(6) by chromatography-based techniques.

Definition

ChEBI: A fatty aldehyde that is heptane in which one of the hydrogens at position 3 has been replaced by a formyl group. It is a metabolite of the plasticisers di-2-ethylhexyl phthalate (DEHP) and di-2-ethylhexyl adipate (DEHA).

Synthesis Reference(s)

Journal of the American Chemical Society, 77, p. 359, 1955 DOI: 10.1021/ja01607a036
Synthesis, p. 767, 1976 DOI: 10.1055/s-1976-24198

General Description

White liquid with a mild odor. Floats on water.

Air & Water Reactions

Spontaneously flammable in air. [Steele and Dugan, Chem. Eng. 66:160(1960)]. Insoluble in water.

Reactivity Profile

2-ETHYLHEXANAL are aldehydes. Aldehydes are frequently involved in self-condensation or polymerization reactions. These reactions are exothermic; they are often catalyzed by acid. Aldehydes are readily oxidized to give carboxylic acids. Flammable and/or toxic gases are generated by the combination of aldehydes with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing agents. Aldehydes can react with air to give first peroxo acids, and ultimately carboxylic acids. These autoxidation reactions are activated by light, catalyzed by salts of transition metals, and are autocatalytic (catalyzed by the products of the reaction). The addition of stabilizers (antioxidants) to shipments of aldehydes retards autoxidation.

Hazard

Ignites in air.

Health Hazard

Inhalation may be irritating to mucous membrane; overexposure may cause dizziness and collapse. Ingestion causes irritation of mouth and stomach. Contact with eyes or skin causes irritation.

Fire Hazard

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.

Safety Profile

Moderately toxic by ingestion and intraperitoneal routes. Mildly toxic by inhalation and skin contact. An eye and severe skin irritant. See also ALDEHYDES. Dangerous fire hazard; spontaneously flammable in air. To fight fire, use foam, CO2, dry chemical, water spray, mist, fog. Incompatible with oxidizing materials. When heated to decomposition it emits acrid and irritating fumes.

Potential Exposure

It is used as a solvent extraction chemical; in organic synthesis; perfume formulation, disinfectant

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin,remove contaminated clothing and wash immediately withsoap and water. Seek medical attention immediately. If thischemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart actionhas stopped. Transfer promptly to a medical facility. Whenthis chemical has been swallowed, get medical attention.Give large quantities of water and induce vomiting. Do notmake an unconscious person vomit. Medical observation isrecommended for 24-48 h after breathing overexposure, aspulmonary edema may be delayed

storage

Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with ethyl hexaldehyde you should betrained on its proper handling and storage. Before enteringconfined space where this chemical may be present, checkto make sure that an explosive concentration does not exist.Store in tightly closed containers in a cool, well-ventilatedarea away from oxidizers, strong bases, and combustiblematerials. Metal containers involving the transfer of thischemical should be grounded and bonded. Where possible,automatically pump liquid from drums or other storage containers to process containers. Drums must be equipped withself-closing valves, pressure vacuum bungs, and flamearresters. Use only nonsparking tools and equipment, especially when opening and closing containers of this chemical. Sources of ignition, such as smoking and open flames,are prohibited where this chemical is used, handled, orstored in a manner that could create a potential fire orexplosion hazard. Wherever this chemical is used, handled,manufactured, or stored, use explosion-proof electricalequipment and fittings

Shipping

UN1191 Octyl aldehydes, Hazard Class: 3; Labels: 3-Flammable liquid

Incompatibilities

May form explosive mixture with air. Violent reaction with oxidizers. Incompatible with strong acids; caustics, ammonia, amines. May ignite spontaneously when spilled on clothing or other absorbent materials. May form unstable peroxides on contact with air; under certain conditions ignites spontaneously with air.

Waste Disposal

Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.