10,10-Oxybisphenoxarsine Property

Melting point:

180-184°C

Boiling point:

232.5°C

Density 

1.40-1.42

storage temp. 

Sealed in dry,Room Temperature

form 

solid

color 

Colorless or white crystals, monoclinic prisms from EtOH or 2-propanol

Water Solubility 

insoluble

CAS DataBase Reference

58-36-6(CAS DataBase Reference)

EPA Substance Registry System

10,10'-Oxybisphenoxarsine (58-36-6)

Safety

RIDADR 

1557

HazardClass 

6.1(a)

PackingGroup 

II

Hazardous Substances Data

58-36-6(Hazardous Substances Data)

Toxicity

LD50 orl-rat: 40 mg/kg TXCYAC 10,341,78

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H300Fatal if swallowed

H311Toxic in contact with skin

H314Causes severe skin burns and eye damage

H330Fatal if inhaled

H372Causes damage to organs through prolonged or repeated exposure

H400Very toxic to aquatic life

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P270Do not eat, drink or smoke when using this product.

P271Use only outdoors or in a well-ventilated area.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P284Wear respiratory protection.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P301+P330+P331IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P310Immediately call a POISON CENTER or doctor/physician.

P312Call a POISON CENTER or doctor/physician if you feel unwell.

P314Get medical advice/attention if you feel unwell.

P320Specific treatment is urgent (see … on this label).

P321Specific treatment (see … on this label).

P322Specific measures (see …on this label).

P330Rinse mouth.

P361Remove/Take off immediately all contaminated clothing.

P363Wash contaminated clothing before reuse.

P391Collect spillage. Hazardous to the aquatic environment

P403+P233Store in a well-ventilated place. Keep container tightly closed.

P405Store locked up.

P501Dispose of contents/container to..…

10,10-Oxybisphenoxarsine Chemical Properties,Usage,Production

Description

0-100-Oxidiphenoxarsine is a colorless crystalline, organometallic solid or a dense yellow liquid. Molecularweight 5 502.23; Boiling point =233℃; Freezing/Meltingpoint =185℃. Decomposition temperature =380℃. Flashpoint =<32℃. Hazard Identification (based on NFPA-704M Rating System): Health 1, Flammability 0, Reactivity 1.Practically insoluble in water.

Chemical Properties

10-10′-Oxidiphenoxarsine is a colorless crystalline, organometallic solid or a dense yellow liquid. Odorless.

General Description

A clear light yellow liquid with a mild odor. Insoluble in water and slightly denser than water. Contact may severely irritate skin, eyes, and mucous membranes. Flash point 98°F.

Air & Water Reactions

Highly flammable. Insoluble in water.

Reactivity Profile

Organometallics, such as 10,10-Oxybisphenoxarsine, are reactive with many other groups. Incompatible with acids and bases. Organometallics are good reducing agents and therefore incompatible with oxidizing agents.

Health Hazard

(Non-Specific -- Arsenic Compounds) Arsenic compounds are acutely poisonous by ingestion. Ingestion or inhalation may result in chronic poisoning. Arsenic compounds are recognized carcinogens of the skin, lungs, and liver.

Fire Hazard

(Non-Specific -- Arsenic Compounds) When heated to decomposition, 10,10-Oxybisphenoxarsine emits highly toxic fumes of arsenic.

Safety Profile

Poison by ingestion and inhalation. A severe skin irritant. When heated to decomposition it emits toxic fumes of As.

Potential Exposure

This material is used primarily for fungicidal and bactericidal protection of plastics. It is an organoarsenic and a heavy metal compound.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seekmedical attention immediately. If this chemical contactsthe skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove fromexposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing hasstopped and CPR if heart action has stopped. Transferpromptly to a medical facility. When this chemical hasbeen swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit.Note to physician: For severe poisoning BAL [British AntiLewisite, Dimercaprol, dithiopropanol (C3H8OS2)] has beenused to treat toxic symptoms of certain heavy metalspoisoning—including arsenic. Although BAL is reported tohave a large margin of safety, caution must be exercisedbecause toxic effects maybe caused by excessive dosage.Most can be prevented by premedication with 1-ephedrinesulfate (CAS: 134-72-5). For milder poisoning penicillamine (not penicillin) has been used, both with mixed success. Side effects occur with such treatment and it is nevera substitute for controlling exposure. It can only be doneunder strict medical care.

storage

(1) Color Code—Red: Flammability Hazard (dissolved in a flammablecarrier solvent): Store in a flammable liquid storage area or approved cabinet away fromignition sources and corrosive and reactive materials. (2)Color Code—Blue (carcinogen): Health Hazard/Poison:Store in a secure poison location. Prior to working with thischemical you should be trained on its proper handling andstorage. Store in tightly closed containers in a cool,well-ventilated area away from oxidizers. Where possible,automatically transfer material from drums or other storagecontainers to process containers. Sources of ignition, suchas smoking and open flames, are prohibited where thischemical is handled, used, or stored. Metal containersinvolving the transfer of this chemical should be groundedand bonded. Use only nonsparking tools and equipment,especially when opening and closing containers of thischemical. Wherever this chemical is used, handled, manufactured, or stored, use explosion-proof electrical equipmentand fittings. A regulated, marked area should be establishedwhere this chemical is handled, used, or stored in compliance with OSHA Standard 1910.1045.

Shipping

UN1760 Corrosive liquids, n.o.s., Hazard class: 8; Labels: 8-Corrosive material, Technical Name Required. UN3465 Organoarsenic compound, solid, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required.

Incompatibilities

A reducing agent; reacts violently with strong oxidizers. Keep away from strong acids and strong bases.