Tantalum(V) chloride Property

Melting point:

221 °C

Boiling point:

242 °C

Density 

3.68 g/mL at 25 °C(lit.)

vapor pressure 

69.9hPa at 169.3℃

Flash point:

242°C

storage temp. 

no restrictions.

solubility 

Soluble in ether, carbon tetrachloride, sulfuric acid and potassium hydroxide. Slightly soluble in ethanol.

form 

powder

color 

White to pale yellow

Specific Gravity

3.68

Water Solubility 

Soluble in water (reacts). Also soluble in ethanol, ether and carbon tetrachloride.

Sensitive 

Moisture Sensitive

Merck 

14,9054

InChIKey

OEIMLTQPLAGXMX-UHFFFAOYSA-I

CAS DataBase Reference

7721-01-9(CAS DataBase Reference)

EPA Substance Registry System

Tantalum chloride (TaCl5) (7721-01-9)

Safety

Hazard Codes 

C

Risk Statements 

22-34

Safety Statements 

26-36/37/39-45

RIDADR 

UN 3260 8/PG 2

WGK Germany 

3

RTECS 

WW5600000

F 

3-10-21

TSCA 

Yes

HazardClass 

8

PackingGroup 

III

HS Code 

28273990

Toxicity

LD50 in rats (mg/kg): 75 i.p.; 1900 orally (Cochran)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H302Harmful if swallowed

H314Causes severe skin burns and eye damage

H335May cause respiratory irritation

Precautionary statements

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P270Do not eat, drink or smoke when using this product.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Tantalum(V) chloride Chemical Properties,Usage,Production

Physical Properties

Tantalum(V) chloride, also known as tantalum pentachloride, Yellow monoclinic crystals; hygroscopic; critical temperature 494°C; critical volume 402 cm3/mol; can be sublimed without decomposition in chlorine atmosphere; reacts with water; soluble in ethanol, ether and carbon tetrachloride.

Preparation

Tantalum pentachloride is prepared by heating tantalum metal with excess chlorine:
2Ta + 5Cl2 → 2TaCl5

Reactions

Tantalum pentachloride is hydrolyzed by water to form hydrous tantalum pentoxide, Ta2O5•nH2O and hydrochloric acid:
2TaCl5 + 5H2O → Ta2O5 + 10HCl
Reaction with hydrofluoric acid yields tantalum pentafluoride:
TaCl5 + 5HF → TaF5 + 5HCl
Tantalum pentachloride forms adducts with donor solvent molecules. Also, it forms several complexes and organometallic derivatives.
Reactions with alcohols in the presence of an amine forms dinuclear alkoxides. Thus, with ethanol in the presence of diethylamine, the dinuclear tantalum ethoxide, Ta2(OC2H5)10, is obtained.
Reaction with dimethylzinc forms dichlorotrimethyl tantalum, in which three chlorine atoms are substituted with methyl groups:
2TaCl5 + 3Zn(CH3)2 → 2(CH3)3TaCl2 + 3ZnCl2
Reaction with cyclopentadienyl sodium yields bis(cyclopentadienyl) tantalum trichloride:
TaCl5 + 2C5H5 Na → (C5H5)2TaCl3 + 2NaCl

Chemical Properties

Pale-yellow, crystalline powder; highly reactive. Decomposed by moist air. Soluble in alcohol and potassium hydroxide solution. Keep well stoppered.

Physical properties

Yellow monoclinic crystals; hygroscopic; density 3.68 g/cm³; melts at 216°C; vaporizes at 239.4°C; critical temperature 494°C; critical volume 402 cm³/mol; can be sublimed without decomposition in chlorine atmosphere; reacts with water; soluble in ethanol, ether and carbon tetrachloride.

Uses

Tantalum(V) chloride is used in the preparation of catalyst for the polycyclotrimerizations of alkenediynes, chloro-aryloxide compounds and for the plasma-enhanced atomic layer deposition of tantalum nitride films. It acts as a starting material for new edge-bridged octahedral M6 cluster compounds. It is involved in the preparation of tantalum(V) oxychloride, tantalum pentoxide. It is electrophilic and behaves like a Friedel-Crafts type catalyst, similar to aluminum(III) chloride.

Application

Tantalum(V) chloride is an excellent water soluble crystalline Tantalum source for uses compatible with chlorides.
Used to form mixed chloro-aryloxide compounds, such as [Ta(OC6H3-2,6-i-Pr2)2Cl3]2, which form pyridine or phosphine adducts with a distortedsix-coordinate geometry.
Also used as a starting material for new edge-bridged octahedral M6 cluster compounds such as CsErTa6Cl18, for which electron and stability studies were performed.
Used in the preparation of a simple catalyst for the polycyclotrimerizations of alkenediynes.
Used for the plasma-enhanced atomic layer deposition of tantalum nitride films.

Production Methods

Tantalum pentachloride, TaCl5, forms strongly hydroscopic, needle-shaped white crystals. It is produced on an industrial scale in large tonnage by the chlorination of tantalum scrap or ferrotantalum with NaFeCl4 or by the reductive chlorination of natural ores or synthetic raw materials. High purity TaCl5 is hydrolyzed with steam and thus converted to Ta2O5 of the highest purity. The reduction of TaCl5 with Mg or Al was repeatedly attempted but this thermite-type process never attained any industrial application. TaCl5 is soluble in absolute alcohol, forming the corresponding alkoxides. The alkoxides as well as the chlorides are suitable products for the deposition of tantalum or tantalum pentoxide layers.

Flammability and Explosibility

Non flammable

Safety Profile

Poison by intraperitoneal route. Moderately toxic by ingestion. When heated to decomposition it emits toxic fumes of Cl-.

Purification Methods

Purify it by sublimation in a stream of Cl2. It forms colourless needles when pure (yellow when contaminated with even less than 1% of NbCl5). It is sensitive to H2O; even in conc HCl it decomposes to tantalic acid. It is soluble in EtOH. [Rolsten J Am Chem Soc 80 2952 1958, Brauer in Handbook of Preparative Inorganic Chemistry (Ed Brauer) Academic Press Vol II p 1302 1965.]