Rubidium hydroxide Property

Melting point:

300-302°C

Density 

1.74 g/mL at 25 °C

solubility 

soluble in ethanol

form 

Liquid

color 

Pale yellow

Water Solubility 

soluble

Sensitive 

Hygroscopic

Merck 

14,8285

CAS DataBase Reference

1310-82-3(CAS DataBase Reference)

NIST Chemistry Reference

Rubidium monohydroxide(1310-82-3)

EPA Substance Registry System

Rubidium hydroxide (Rb(OH)) (1310-82-3)

Safety

Hazard Codes 

C

Risk Statements 

20/21/22-34-22

Safety Statements 

26-27-28-36/37/39-45

RIDADR 

UN 2677 8/PG 2

WGK Germany 

3

RTECS 

VL8750000

TSCA 

Yes

HazardClass 

8

PackingGroup 

II

HS Code 

28259085

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H314Causes severe skin burns and eye damage

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Rubidium hydroxide Chemical Properties,Usage,Production

Chemical Properties

clear colorless solution

Physical properties

Grayish-white orthogonal crystals; hygroscopic; density 3.2 g/cm³; melts at 301°C; very soluble in water (100 g/100 mL at 15°C), the solution highly alkaline; soluble in ethanol.

Uses

Rubidium hydroxide is an important intermediate in the synthesis of other rubidium compounds and can be used as a catalyst in oxidative chlorination reactions. It is also used in photography and storage batteries. Adding Rubidium hydroxide to fireworks to give it a violet color.

Preparation

Rubidium hydroxide may be obtained as an intermediate in recovering rubidium metal from mineral lepidolite (see Rubidium). In the laboratory it may be prepared by adding barium hydroxide to a solution of rubidium sulfate. The insoluble barium sulfate is separated by filtration:
Rb₂SO₄ + Ba(OH)₂ → 2RbOH + BaSO₄
Preparation should be in nickel or silver containers because rubidium hydroxide attacks glass. The solution is concentrated by partial evaporation. The commercial product is usually a 50% aqueous solution.

Definition

ChEBI: Rubidium hydroxide is an alkali metal hydroxide and a rubidium molecular entity.

General Description

A clear aqueous solution. Very caustic. Very irritating to skin and eyes. Used in electric storage batteries.

Air & Water Reactions

Absorbs carbon dioxide from the air. May generate large amounts of heat when diluted with water.

Reactivity Profile

A strong base. Forms caustic solution in water [Merck 11th ed. 1989].

Hazard

Strong irritant to tissue.

Health Hazard

TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

Fire Hazard

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.

Safety Profile

Moderately toxic by ingestion. A powerful, corrosive irritant to skin, eyes, and mucous membranes. When heated to decomposition it emits toxic fumes of RbzO. See also POTASSIUM HYDROXIDE and RUBIDIUM.