Hexabromocyclododecane Property

Melting point:

188-191 °C

Density 

1.05 g/cm3

vapor pressure 

0Pa at 21℃

solubility 

Benzene (Slightly), Ethyl Acetate (Slightly)

form 

Solid

color 

White to Off-White

Water Solubility 

65.6μg/L at 20℃

LogP

5.625 at 25℃

CAS DataBase Reference

25637-99-4(CAS DataBase Reference)

EPA Substance Registry System

Hexabromocyclododecane (25637-99-4)

Safety

Safety Statements 

22-24/25

RIDADR 

3077

WGK Germany 

1

F 

3-9

HazardClass 

9

PackingGroup 

III

Hazardous Substances Data

25637-99-4(Hazardous Substances Data)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H361Suspected of damaging fertility or the unborn child

H362May cause harm to breast-fed children

Precautionary statements

P201Obtain special instructions before use.

P202Do not handle until all safety precautions have been read and understood.

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P263Avoid contact during pregnancy/while nursing.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P270Do not eat, drink or smoke when using this product.

P281Use personal protective equipment as required.

P308+P313IF exposed or concerned: Get medical advice/attention.

P405Store locked up.

P501Dispose of contents/container to..…

Hexabromocyclododecane Chemical Properties,Usage,Production

Chemical Properties

Hexabromocyclododecane (HBCD) is a white odorless nonvolatile solid compound which is used as an additive flame retardant on its own, or in combination with other flame retardants. It is used as a flame retardant mainly in building insulation composed of extruded or expanded polystyrene foam. A minor use is in flame retardant back-coats of some upholstery textiles.

Uses

The commercially available brominated flame retardant hexabromocyclododecane (HBCD) is lipophilic, has a high affinity to particulate matter and low water solubility. It is used as a flame retardant additive, with the intent of delaying ignition and slowing subsequent fire growth during the service life of vehicles, buildings or articles, as well as while materials are stored. The main uses of HBCD are in flame-retarded expanded (EPS) and extruded (XPS) polystyrene foam insulation, with smaller scale use in textile applications and electric and electronic appliances (high impact polystyrene/HIPS). In textiles HBCD is used in back-coatings for upholstery and other interior textiles, including automotive applications.

Preparation

The aliphatic flame retardant, hexabromocyclododecane (HBCD), is produced by the addition reaction of bromine to trans,trans,cis-1,5,9-cyclododecatriene, the cyclic trimer of butadiene. The HBCD that is obtained from this reaction consists of a mixture of stereoisomers of 1,2,5,6,9,10-hexabromocyclo-dodecane [3194-55-6] ranging from oils to an isomer with a 205–208℃ melting point. Commercially available HBCD contains a mixture of solid isomers and has a melting point range of 170–180 ℃ (185–195℃ ).
Addition of bromine to the cyclic triene in nonpolar solvents results in substantial amounts of free-radical substitution reactions which lead to decreased yields and lower quality product. Use of polar solvents, such as ethanol, reduces the substitution reaction but can give rise to vicinal bromoethoxy by products. Mixed solvent systems, such as benzene–tert-butyl alcohol or perchloroethylene-ethanol,can be employed to improve product purities and yields.
Another technique to reduce the formation of undesired byproducts is to add the bromine and cyclododecatriene simultaneously and sep- arately to ethanol. This process is carried out by separately feeding bromine and cyclo- dodecatriene in a molar ratio of 3 : 1 to 96 % ethanolinastirredreactor.The reaction temperature is kept at 20-30℃ and a 1-5% excess of bromine is maintained during the 2.5–3.0h addition. The precipitated product is recovered by filtration or centrifugation, and the mother liquor is recovered and reused in subsequent reactions after adding makeup ethanol. The total yield of dried HBCD from nine separate batches using recycled mother liquor is 92%.

General Description

HexabroMocyclododecane is White powder. Insoluble in water.

Air & Water Reactions

HexabroMocyclododecane is Insoluble in water.

Reactivity Profile

Halogenated aliphatic compounds, such as Hexabromocyclododecane, are moderately or very reactive. Reactivity generally decreases with increased degree of substitution of halogen for hydrogen atoms. Materials in this group may be incompatible with strong oxidizing and reducing agents. Also, they may be incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides. Hexabromocyclododecane can react vigorously with oxidizing materials.

Fire Hazard

Flash point data for Hexabromocyclododecane are not available. Hexabromocyclododecane is probably combustible.