5-BroMo-3-nitrosalicylaldehyde
Application- Product Name
- 5-BroMo-3-nitrosalicylaldehyde
- CAS No.
- 16634-88-1
- Chemical Name
- 5-BroMo-3-nitrosalicylaldehyde
- Synonyms
- 5-Bromo-3-nitrosalicyladehyde;5-BROMO-3-NITRO SALCYLALDEHYDE;5-BROMO-3-NITROSALICYLALDEHYDE;3-Nitro-5-broMosalicylaldehyde;5-Bromo-3-nitrosalycylaldehyde;Salicylaldehyde, 5-bromo-3-nitro-;5-BROMO-3-NITROSALICYLALDEHYDE 97;5-Bromo-3-nitrosalicylaldehyde >2-Hydroxy-3-nitro-5-bromobenzaldehyde;benzaldehyde, 5-bromo-2-hydroxy-3-nitro-
- CBNumber
- CB4498890
- Molecular Formula
- C7H4BrNO4
- Formula Weight
- 246.01
- MOL File
- 16634-88-1.mol
5-BroMo-3-nitrosalicylaldehyde Property
- Melting point:
- 125-127 °C
- Boiling point:
- 265.8±40.0 °C(Predicted)
- Density
- 1.928±0.06 g/cm3(Predicted)
- storage temp.
- Keep in dark place,Sealed in dry,Room Temperature
- form
- powder to crystal
- pka
- 4.23±0.38(Predicted)
- color
- Light orange to Yellow to Green
- Sensitive
- Air Sensitive
- InChI
- InChI=1S/C7H4BrNO4/c8-5-1-4(3-10)7(11)6(2-5)9(12)13/h1-3,11H
- InChIKey
- YEYPSUQQZNDKDE-UHFFFAOYSA-N
- SMILES
- C(=O)C1=CC(Br)=CC([N+]([O-])=O)=C1O
Hazard and Precautionary Statements (GHS)
- Symbol(GHS)
-
- Signal word
- Warning
- Hazard statements
-
H315Causes skin irritation
H319Causes serious eye irritation
H335May cause respiratory irritation
- Precautionary statements
-
P261Avoid breathing dust/fume/gas/mist/vapours/spray.
P264Wash hands thoroughly after handling.
P264Wash skin thouroughly after handling.
P280Wear protective gloves/protective clothing/eye protection/face protection.
P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.
P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
P405Store locked up.
N-Bromosuccinimide Price
- Product number
- 652768
- Product name
- 5-Bromo-3-nitrosalicylaldehyde
- Purity
- 97%
- Packaging
- 5g
- Price
- $477
- Updated
- 2023/06/20
- Product number
- B0908
- Product name
- 5-Bromo-3-nitrosalicylaldehyde
- Purity
- >97.0%(GC)(T)
- Packaging
- 1g
- Price
- $36
- Updated
- 2025/07/31
- Product number
- B0908
- Product name
- 5-Bromo-3-nitrosalicylaldehyde
- Purity
- >97.0%(GC)(T)
- Packaging
- 5g
- Price
- $107
- Updated
- 2025/07/31
- Product number
- B678005
- Product name
- 5-Bromo-2-hydroxy-3-nitrobenzaldehyde
- Packaging
- 100mg
- Price
- $60
- Updated
- 2021/12/16
- Product number
- B678005
- Product name
- 5-Bromo-2-hydroxy-3-nitrobenzaldehyde
- Packaging
- 500mg
- Price
- $90
- Updated
- 2021/12/16
5-BroMo-3-nitrosalicylaldehyde Chemical Properties,Usage,Production
Application
5-Bromo-3-nitrosalicylaldehyde can be used as a pharmaceutical intermediate, mainly in laboratory research and development and organic synthesis processes.
Synthesis
1761-61-1
16634-88-1
The general procedure for the synthesis of 5-bromo-2-hydroxy-3-nitrobenzaldehyde (2) from 5-bromo-2-hydroxybenzaldehyde (1) by nitration reaction is as follows: Step 1a: 1.0 mole of 5-bromo-2-hydroxybenzaldehyde (1) was dissolved in 3.75 liters of 98% acetic acid and heated to about 60°C. 1.5 moles of concentrated nitric acid (137 g, 97 mL) was added slowly over about 1 hour. After addition, stirring was continued at 65°C for 10 minutes. The reaction solution was then cooled to 45°C and 4 liters of water was added to precipitate the product. After stirring for at least 3 hours, the product was collected by filtration and washed with water until the pH of the mother liquor was about 6. As much water as possible was removed by centrifugation. Step 1b: The crude product was dissolved in 800 ml of acetone under reflux and stirring. 400 ml of acetone was removed by distillation. After cooling to 20°C, stirring was continued for 3 hours. The precipitate was collected by filtration and washed with petroleum ether (boiling point 40-65°C). The solid was dried overnight at 40°C in a stream of air. Step 1c: The crude product (2) was recrystallized from acetone to give a final product of 98% purity as shown by NMR analysis.The characteristic chemical shift of 5-bromo-2-hydroxybenzaldehyde (1) was δ 9.84 ppm; and the characteristic chemical shift of 5-bromo-2-hydroxy-3-nitrobenzaldehyde (2) was δ 10.4 ppm.The overall yield for this step was about 60% (based on the crude product).
References
[1] Organic and Biomolecular Chemistry, 2018, vol. 16, # 35, p. 6460 - 6469
[2] Tetrahedron, 2003, vol. 59, # 46, p. 9239 - 9247
[3] Patent: WO2015/42397, 2015, A1. Location in patent: Paragraph 000244
[4] Patent: WO2005/92340, 2005, A1. Location in patent: Page/Page column 17-18
[5] Patent: WO2005/92339, 2005, A1. Location in patent: Page/Page column 16-17
5-BroMo-3-nitrosalicylaldehyde Preparation Products And Raw materials
Raw materials
Preparation Products
5-BroMo-3-nitrosalicylaldehyde Suppliers
- Tel
- +91 9891111994
- info@glrgroup.in
- Country
- India
- ProdList
- 4535
- Advantage
- 58
- Tel
- --
- Fax
- --
- sales-in@tcichemicals.com
- Country
- India
- ProdList
- 6768
- Advantage
- 58
- Tel
- --
- Fax
- --
- tech@alfa.com
- Country
- India
- ProdList
- 6905
- Advantage
- 58
- Tel
- --
- Fax
- --
- sales@ajchem.in
- Country
- India
- ProdList
- 6100
- Advantage
- 58
View Lastest Price from 5-BroMo-3-nitrosalicylaldehyde manufacturers
- Product
- 5-BroMo-3-nitrosalicylaldehyde 16634-88-1
- Price
- US $0.00-0.00/g
- Min. Order
- 10mg
- Purity
- 99%HPLC
- Supply Ability
- 2000tons
- Release date
- 2020-01-15
- Product
- 5-BROMO-3-NITROSALICYLALDEHYDE 97 16634-88-1
- Price
- US $1.00/KG
- Min. Order
- 1KG
- Purity
- 98% HPLC
- Supply Ability
- 10 tons
- Release date
- 2020-02-01