Triphenyl phosphite Property

Melting point:

22-24 °C (lit.)

Boiling point:

360 °C (lit.)

Density 

1.184 g/mL at 25 °C (lit.)

vapor density 

10.7 (vs air)

vapor pressure 

5 mm Hg ( 205 °C)

refractive index 

n20/D 1.59(lit.)

Flash point:

425 °F

storage temp. 

Store below +30°C.

solubility 

methanol: 25 mg/mL, clear

form 

Liquid

color 

Clear colorless to pale yellow

PH

1 (200g/l, H2O, 20℃)

Water Solubility 

insoluble

Sensitive 

Air & Moisture Sensitive

BRN 

1079456

Dielectric constant

3.2（24℃）

Stability:

Stable. Combustible. Incompatible with strong oxidizing agents.

InChIKey

HVLLSGMXQDNUAL-UHFFFAOYSA-N

CAS DataBase Reference

101-02-0(CAS DataBase Reference)

NIST Chemistry Reference

Phosphorous acid, triphenyl ester(101-02-0)

EPA Substance Registry System

Triphenyl phosphite (101-02-0)

Safety

Hazard Codes 

Xn,N,Xi

Risk Statements 

36/38-50/53

Safety Statements 

28-60-61-28A-26

RIDADR 

UN 3077 9/PG 3

WGK Germany 

2

RTECS 

TH1575000

TSCA 

Yes

HazardClass 

9

PackingGroup 

III

HS Code 

29209085

Hazardous Substances Data

101-02-0(Hazardous Substances Data)

Toxicity

LD50 oral in rat: 444mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H302Harmful if swallowed

H315Causes skin irritation

H317May cause an allergic skin reaction

H319Causes serious eye irritation

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Triphenyl phosphite Chemical Properties,Usage,Production

Secondary antioxidants

Triphenyl phosphite is called for short TPP, it is also known as triphenoxytitanium phosphine, it is phosphite-based compound, it is a secondary antioxidant, it has light stabilizing effect, it is applicable to polyvinyl chloride, polypropylene, polystyrene, poly acetate, ABS resin, epoxy resin and the like. Triphenyl phosphite is widely used as polyvinyl chloride chelating agent, when the metal soap is used as stabilizer, coordinating with this product can reduce the harm of the metal chlorides, it can keep transparency of product and inhibit the change in color. Further triphenyl phosphate is also used as flame retardant plasticizer.
Phosphite phenyl diisooctyl can be obtained by the transesterification reaction of triphenyl phosphite and isooctanol in the presence of catalyst, phosphite phenyl diisooctyl can be used as secondary antioxidant. It has good resistance to discoloration, it can increase oxidation resistance and light stability. It has chelating action in PVC, low toxicity, it can be used in plastic medical devices.
In addition, this product in the presence of sodium methoxide can proceed the transesterification reaction with methanol to form trimethyl phosphite.
Triphenyl phosphite is as raw material, it can react with octanol in the solution of sodium methoxide, octyl diphenyl phosphite can be prepared.
The above information are collated by Xiaonan edit Chemicalbook (2016-12-03).

Physical and chemical properties

It is colorless or pale yellow oily liquid. It has slightly with phenol odor. Molecular weight is 310. Color (APHA) <50. Acid value is <0.5mgKOH/g. Phosphorus content is 10%. The relative density is 1. 180~1.186 (25°/ 15.5℃). Viscosity is 12 mPa•s (38℃), 4.5mPa•s (99℃). The freezing point is 19~24℃. Melting point is 22~25℃. Boiling point is 220℃ (1333Pa). Flash point (open cup) is 218.3℃, ignition point is 243℃. Refractive index is 1.5880 ~1.5900 (25℃). Solubility (g/100g solvent): methanol> 10, benzene> 10 acetone> 10, it is insoluble in water. Triphenyl phosphate has irritating to the skin, rat oral LD50 is 2800mg/kg body weight, it is used as polymer antioxidant and stabilizer, it has better synergy effect with many phenolic antioxidants. By effect of phosphorus trichloride and phenol can get triphenyl phosphite.

Chemical properties

It is colorless to pale yellow monoclinic crystal below room temperature. It is colorless light yellow transparent oily liquid at room temperature or higher, it has pungent odor. It is insoluble in water, soluble in organic solvents such as ethanol, ethyl ether, acetone, benzene and the like.

Uses

(1) Triphenyl phosphite is used as chelating agents, plastics antioxidant, alkyd resin and pesticide intermediate raw material.
(2) It is used for synthetic rubber and resin stabilizer, PVC antioxidant, alkyd resin and pesticide intermediate raw material.
(3) Triphenyl phosphite is used as secondary antioxidants, it has effect of light stability, it is suitable for polyvinyl chloride, polypropylene, polystyrene, polyester, ABS resin, and epoxy resin. (4) It is used as chelating agent in PVC products, it can enable products to maintain transparency, and suppresse color change. It can also be used for the production of trimethyl phosphite.
(5) Antioxidants, stabilizers TPPi is mainly applied to polyvinyl chloride, polyethylene, polypropylene, polystyrene, polyester, ABS resin, epoxy resin, synthetic rubber antioxidant stabilizer for PVC vinyl products as chelating agent, when the metal is as based stabilizer, coordinating with the product can reduce the harm of metal chloride
(6) Chelating agent. Plastic products antioxidant. The synthesis of alkyd resins and polyester resins.
(7) Chelating agent. Plastic products antioxidant. The synthesis of alkyd resins and polyester resins.
(8) Chelating agent, it is widely used in all kinds of PVC products, it can enable products to maintain its transparency and suppress color change, and it can increase the antioxidant and light and heat stability of the primary stabilizer. In addition, the product is also used for PE, PP, ABS, SBS and other products, and it can be used for pesticide intermediates. It can be used for synthetic alkyd resins and polyester materials and polyester resins.

Uses

Triphenyl phosphite (TPP) is the chemical compound with the formula P(OC6H5)3. This colourless viscous liquid is the ester of phosphorous acid and phenol. It is used as a ligand in organometallic chemistry. Nickel complexes of this ligand are homogeneous catalysts for the hydrocyanation of alkenes.

Production methods

It can be obtained from phenol and phosphorus trichloride. Raw material consumption (kg/t) phenol (freezing point ≥40.4 ℃) 940 phosphorus trichloride (99%) 480

Toxic Effects

The primary toxic effects of triphenyl phosphite are exerted on the nervous system of susceptible animals. The univeral signs of triphenyl phosphite neurotoxicity result from the irreversible inhibition of acetylcholinesterase (AChE) at cholinergic synapses in the central, peripheral and autonomic nervous system. Triphenyl phosphite is also capable of producing characteristic delayed neurotoxic effects that are manifested several days or weeks after even minimal drug exposure. Such actions are not related to AChE inhibition and the precise biochemical mechanism(s) leading to the delayed neurotoxicity symptoms are largely unresolved.

Chemical Properties

Water-white to pale-yellow solid or oily liquid; pleasant odor. Combustible.

Uses

Stabilizer/antioxidant for vinyl plastics and polyethylene, polypropylene, styrene copolymers, and rubber.

Uses

Triphenyl phosphite can be used:

• As a source of phosphorus and as a ligand for the synthesis of transition metal phosphide nanoparticles via heating-up process.
• To convert alcohols to alkyl halides.
• As a peptide coupling agent.
• As a low-temperature source of singlet oxygen after forming an adduct with ozone.
• To synthesize bromotriphenoxyphosphonium bromide, a brominating agent, by reacting with bromine.

Uses

Chemical intermediate, stabilizer systems for resins, metal scavenger, diluent for epoxy resins.

Air & Water Reactions

Insoluble in water.

Reactivity Profile

Organophosphates, such as Triphenyl phosphite, are susceptible to formation of highly toxic and flammable phosphine gas in the presence of strong reducing agents such as hydrides. Partial oxidation by oxidizing agents may result in the release of toxic phosphorus oxides.

Health Hazard

Triphenyl phosphite (TPP) is a skin irritant and sensitizer in humans and is neurotoxic in laboratory animals.Systemic effects have not been reported in humans.

reaction suitability

Buchwald-Hartwig Cross-Coupling Reaction; Heck Reaction; Hiyama Coupling; Negishi Couplingp; Sonogashira Coupling; Stille Coupling; Suzuki-Miyaura Coupling.

Safety Profile

Poison by intraperitoneal and subcutaneous routes. Moderately toxic by ingestion. An experimental eye and severe human skin irritant. Combustible when exposed to heat or flame. To fight fire, use CO2, mist, dry chemical. When heated to decomposition it emits toxic fumes of POx. See also PHENOL.

Synthesis

1120.5 g (11.90 mol) of phenol (3.3 eq.) are placed in a 3-necked, 3-liter flask filled with nitrogen. 494.0 g (3.60 mol) of phosphorus trichloride is charged into a dropping funnel, and 864.5 g of distilled water is poured into an absorption flask for trapping hydrogen chloride. The reaction mixture is heated in an oil bath to a temperature of 45 ° C with stirring, and phosphorus trichloride is added dropwise over 240 minutes. Next, the reaction mixture is stirred for 20 minutes, heated to a temperature of 70 ° C for 10 minutes, kept at this temperature for 10 minutes, heated to a temperature of 160 ° C for 30 minutes and kept for 1.5 hours. Disconnect and weigh the absorption flask with an aqueous solution of hydrogen chloride and get 1242.0 g of hydrochloric acid (30.4 wt%). Replace the reflux condenser with a distillation nozzle with a once-through cooler and a receiving flask. The reaction flask is heated to a temperature of 170 ° C and maintained for 60 minutes under vacuum at a residual pressure of 300-350 mm RT. Art. Gradually reduce the vacuum to a residual pressure of 10 mm RT. Art. and phenol distillate 149.3 g is collected. After phenol is distilled off, triphenyl phosphite weighing 1091.3 g is obtained.

Purification Methods

Its ethereal solution is washed succesively with aqueous 5% NaOH, distilled water and saturated aqueous NaCl, then dried with Na2SO4 and distilled under vacuum after evaporating the diethyl ether. [Walsh J Am Chem Soc 81 3023 1959, Verkade & Coskren in Organo Phosphorus Compounds (Kosolapoff & Maier eds) Wiley Vol 6 pp 211-577 1973, Beilstein 6 IV 695.]