THERMAL SPRAY POWDER - PARTICLE SIZE DISTRIBUTION TUNGSTEN CARBIDE/COBALT (SPHEROIDAL)

THERMAL SPRAY POWDER - PARTICLE SIZE DISTRIBUTION TUNGSTEN CARBIDE/COBALT (SPHEROIDAL) Property

storage temp. 

15-25°C

form 

powder

Safety

WGK Germany 

WGK 3

Storage Class

6.1B - Non-combustible acute toxic Cat. 1 and 2
very toxic hazardous materials

Hazard Classifications

Acute Tox. 2 Inhalation
Aquatic Chronic 2
Carc. 1B
Eye Irrit. 2
Muta. 2
Repr. 1B
Resp. Sens. 1
Skin Sens. 1
STOT RE 2

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H317May cause an allergic skin reaction

H319Causes serious eye irritation

H330Fatal if inhaled

H334May cause allergy or asthma symptoms or breathing difficulties if inhaled

H341Suspected of causing genetic defects

H350May cause cancer

H373May cause damage to organs through prolonged or repeated exposure

H411Toxic to aquatic life with long lasting effects

Precautionary statements

P202Do not handle until all safety precautions have been read and understood.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

THERMAL SPRAY POWDER - PARTICLE SIZE DISTRIBUTION TUNGSTEN CARBIDE/COBALT (SPHEROIDAL) Chemical Properties,Usage,Production

Uses

This Standard Reference Material (SRM) is intended primarily for use in the calibration of equipment used to measure particle size distributions (PSD) in the 18μm to 55μm range. SRM 1985 consists of a single bottle containing approximately 14 g of tungsten carbide/cobalt powder.
SRM 1985_cert
SRM 1985_SDS