Allethrin Property

Melting point:

approximate 4℃

Boiling point:

160°C

Density 

1.01

vapor pressure 

1.6×10^-4 Pa (21 °C)

refractive index 

nD20 1.5040; nD30 1.5023

Flash point:

66 °C

storage temp. 

2-8°C

solubility 

Chloroform: Slightly Soluble

Water Solubility 

2 mg l^-1

form 

Viscous Liquid

color 

Clear amber

BRN 

2294836

LogP

4.780

CAS DataBase Reference

584-79-2(CAS DataBase Reference)

NIST Chemistry Reference

Bioallethrin(584-79-2)

EPA Substance Registry System

Allethrin (584-79-2)

Safety

Hazard Codes 

Xn;N,N,Xn

Risk Statements 

20/22-50/53-40

Safety Statements 

36-60-61-36/37-24/25-23

RIDADR 

UN 3082

WGK Germany 

3

RTECS 

GZ1925000

HazardClass 

6.1(b)

PackingGroup 

III

HS Code 

29183000

Hazardous Substances Data

584-79-2(Hazardous Substances Data)

Toxicity

LD50 oral in rabbit: 4290mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P273Avoid release to the environment.

Allethrin Chemical Properties,Usage,Production

Chemical Properties

Yellow Oil

Uses

Allethrin is a synthetic pyrethroid derivative used as an insecticide. Allethrin is commonly used in many household insecticide products due to its low toxicity towards humans.

Uses

The allethrins are used to control a wide range of insects in horticultural, household, public health and animal health situations. They have some limited use on ornamentals and vegetables (in combination with synergists).

Uses

Esbiothrin may be used as a reference standard for the determination of the analyte in electric-mosquito coils using gas chromatography (GC) technique.

Definition

Generic name for 2-allyl4-hydroxtcyclopenten-1-one ester of chrysanthemummonocarboxylic acid. A synthetic insecticide structurally similar to pyrethrin and used in the same manner. For other synthetic analogs, see barthrin, cyclethrin, ethythrin, furethrin. Pyrethrin I differs in having a 2,4-pentadienyl group in place of the allyl of allethrin.

General Description

A clear amber-colored viscous liquid. Insoluble and denser than water. Toxic by ingestion, inhalation, and skin absorption. A synthetic household insecticide that kills flies, mosquitoes, garden insects, etc.

Air & Water Reactions

Insoluble in water.

Reactivity Profile

Allethrin is an ester and ketone. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. Ketones are reactive with many acids and bases liberating heat and flammable gases (e.g., H2). The amount of heat may be sufficient to start a fire in the unreacted portion of the ketone. Ketones react with reducing agents such as hydrides, alkali metals, and nitrides to produce flammable gas (H2) and heat. Ketones are incompatible with isocyanates, aldehydes, cyanides, peroxides, and anhydrides. They react violently with aldehydes, HNO3, HNO3 + H2O2, and HClO4.

Health Hazard

Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

Fire Hazard

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Containers may explode when heated. Runoff may pollute waterways.

Agricultural Uses

Insecticide: Allethrin is used almost exclusively to control flying and crawling insects in homes and industrial locations. Used extensively in pet animal shampoos, to treat lice in humans and in home and industrial sprays for flying insects, mosquitos, etc. It is available as mosquito coils, mats, oil formulations and as an aerosol spray. It may be hazardous to the environment; special attention should be given to fish and honey bees. Not currently registered in the U.S. Not approved for use in EU countries. Depending on CAS registry number there are probably >100 global suppliers.

Trade name

BIOALLETHRIN®; BIOALLETHRIN TECHNICAL®; d-CISALLETHRIN®; ESBIOTHRIN®; EXTHRIN® FMC 249®; NIA 249®; OMS 468®; PYNAMIN®; PYNAMIN-FORTE®; PYRESIN®; PYRESYN®; PYREXCEL®; PYROCIDE®; SBP 1382/ BIOALLETHRIN CONCENTRATE®

Contact allergens

Pyrethroids, also called pyrethrinoids, are neurotoxic synthetic compounds used as insecticides, with irritant properties. Cypermethrin and fenvalerate have been reported as causing positive allergic patch tests, but only fenvalerate was relevant in an agricultural worker.

Safety Profile

Poison by intravenous, intracerebral, and intraperitoneal routes. Moderately toxic by ingestion and skin contact. An allergen. An insecticide. It can cause liver and kidney damage by all routes of entry into the body. Lung congestion may occur due to exposure. Local contact may cause contact dermatitis. Inhalation may cause asthma, coughing, wheezing, running nose and eyes. Mutation data reported. See also ALLYL COMPOUNDS and ESTERS. Slight fire hazard. When heated to decomposition it emits acrid fumes.

Metabolic pathway

Allethrin was the first synthetic pyrethroid. Its stereochemistry is RS(cyclopentenyl)lRcis-trans. It was further developed as bioallethrin (RSlRtvuns) and then as S-bioallethrin (SlRtvuns), the most potent of the three. All are very sensitive to light and are used almost entirely indoors. Thus, there is only a limited amount of information on their environmental fate published in the literature. Information on photodegradation and on metabolism in insects and rodents has been reported.

Degradation

The allethrins are reasonably stable but they are sensitive to base hydrolysis forming chrysanthemic acid (2) and 3-allyl-2-methyl-4- oxocyclopent-2-enol(3, allethrolone). The DT₅₀ of bioallethrin in aqueous solution is 547 days at pH 7 and 4.3 days at pH 9.
The allethrins are also sensitive to oxidation and to photodecomposition. Allethrin was converted almost quantitatively into the cycloproprethronyl derivative (4) by a di-π-methane rearrangement on irradiation in hexane solution (Bullivant and Pattenden, 1976). In addition, isomerisation, oxidation and epoxidation of the isobutenyl group of the chrysanthemic acid moiety by reactions analogous to those described under phenothrin have been described (Ruzo et al., 1980). Most products retained the ester linkage but the acid 2 was identified. A novel product, 1-cyclopropyl-5-methyl-6-oxabicyclo[3.0.1]hexan-2-on- 4-yl chrysanthemate (5), was then reported (Kimmel et al., 1982). This product proved to be a potent bacterial mutagen (Ames assay). Later Isobe et al. (1984) reported photo-oxidation products derived from the alcohol moiety: the alcohol (3) and allethronyl glyoxalate (6). The latter was mostly present as its hydrate (7).T he ester (8) was also detected but this was shown not to be a precursor of 6 or 7. These products are illustrated in Scheme 1. Products formed by oxidation of the acid moiety and retaining the ester link, such as 9, 10 and 11, are shown in Scheme 2.
These two sites of weakness in allethrin render it one of the most photolabile of the synthetic pyrethroids (Ruzo, 1982) and result in a complex mixture of degradation products.