Phosphorous acid Property

Melting point:

73 °C

Boiling point:

200 °C

Density 

1.651 g/mL at 25 °C(lit.)

vapor pressure 

0.001Pa at 20℃

Flash point:

200°C

storage temp. 

0-6°C

solubility 

DMSO (Slightly), Methanol (Slightly), Water (Sparingly)

form 

Crystals

pka

pK1 1.29; pK2 6.74(at 25℃)

Specific Gravity

1.651

color 

White

Water Solubility 

SOLUBLE

Sensitive 

Air Sensitive & Hygroscopic

Merck 

14,7346

Stability:

Stable. Incompatible with strong bases. Hygroscopic.

CAS DataBase Reference

13598-36-2(CAS DataBase Reference)

NIST Chemistry Reference

(HO)2HPO(13598-36-2)

EPA Substance Registry System

Phosphonic acid (13598-36-2)

Safety

Hazard Codes 

C

Risk Statements 

22-35

Safety Statements 

26-36/37/39-45

RIDADR 

UN 2834 8/PG 3

WGK Germany 

1

RTECS 

SZ6400000

F 

3

TSCA 

Yes

HazardClass 

8

PackingGroup 

III

HS Code 

28092019

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H290May be corrosive to metals

H302Harmful if swallowed

H314Causes severe skin burns and eye damage

Precautionary statements

P234Keep only in original container.

P270Do not eat, drink or smoke when using this product.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Phosphorous acid Chemical Properties,Usage,Production

Description

Phosphorous acid is an intermediate in the preparation of other phosphorous compounds. It is a raw material to prepare phosphonates for water treatment such as iron and manganese control, scale inhibition and removal, corrosion control and chlorine stabilization. The alkali metal salts (phosphites) of phosphorous acid are being widely marketed either as an agricultural fungicide (e.g. Downy Mildew) or as a superior source of plant phosphorous nutrition. Phosphorous acid is used in stabilizing mixtures for plastic materials. Phosphorous acid is used for inhibiting high-temperature of corrosion-prone metal surfaces and to produce lubricants and lubricant additives.

References

[1] Allison E. McDonald, Bruce R. Grant and William C. Plaxton, Phosphite (Phosphorous Acid): Its Relevance in The Environment and Agriculture and Influence on Plant Phosphate Starvation Response, Journal of Plant Nutrition, 2001, vol. 24, 1505-1519
[2] Sai-Shek Young, Stabilizers for plastic materials, Patent, 1993
[3] Guido Sartori, Method for inhibiting corrosion using phosphorous acid, Patent,2004
[4] John R Morris, Lubricant containing a phosphorous acid ester-aldehyde condensation product, Patent, 1956

Description

Phosphorous acid, H3PO3, is diprotic (readily ionizes two protons), not triprotic as might be suggested by this formula. Phosphorous acid is as an intermediate in the preparation of other phosphorous compounds. Because preparation and uses of “phosphorous acid” actually pertain more to the major tautomer, phosphonic acid, it is more often referred to as “phosphorous acid”. Phosphorous acid has the chemical formula H3PO3, which is best expressed as HPO(OH)2 to show its diprotic character. P(OH)3 (IUPAC: phosphorous acid) has CAS number 10294-56-1. It has been shown to be a stable tautomer.

Chemical Properties

Phosphorous acid is a white crystalline deliquescent solid that can be prepared by the action of water on phosphorus( III) oxide or phosphorus(III) chloride. It is a dibasic acid producing the anions H2PO3- and HPO3 2- in water. The acid and its salts are slow reducing agents. On warming, phosphonic acid decomposes to phosphine and phosphoric(V) acid. Phosphorus acid is used to prepare phosphite salts. It is usually sold as a 20% aqueous solution.

Physical properties

White crystalline mass; deliquescent; garlic-like odor; density 1.651 g/cm³ at 21°C; melts at 73.6°C; decomposes at 200°C to phosphine and phosphoric acid; soluble in water, about 310 g/100mL; K₁ 5.1x10^-2 and K₂ 1.8x10^-7; soluble in alcohol.

Uses

Phosphorous acid is used to produce the fertilizer phosphate salt like potassium phosphite, ammonium phosphite and calcium phosphite. It is actively involved in the preparation of phosphites like aminotris(methylenephosphonic acid) (ATMP), 1-hydroxyethane 1,1-diphosphonic acid (HEDP) and 2-phosphonobutane-1,2,4-tricarboxylic Acid (PBTC), which find application in water treatment as a scale or corrosive inhibitor. It is also used in chemical reactions as a reducing agent. Its salt, lead phosphite is used as PVC stabilizer. It is also used as a precursor in the preparation of phosphine and as an intermediate in the preparation of other phosphorus compounds.

Application

Phosphorous acid (H3PO3, orthophosphorous acid) may be used as one of the reaction components for the synthesis of the following:
α-aminomethylphosphonic acids via Mannich-Type Multicomponent Reaction
1-aminoalkanephosphonic acids via amidoalkylation followed by hydrolysis
N-protected α-aminophosphonic acids (phospho-isosteres of natural amino acids) via amidoalkylation reaction

Definition

ChEBI: Phosphorous acid is a phosphorus oxoacid. It is a conjugate acid of a dihydrogenphosphite. It is a tautomer of a phosphonic acid.

Preparation

Phosphorus acid can be prepared by the reaction of phosphorus trichloride with water:
PCl₃ + 3H₂O → H₃PO₄ + 3HCl
The reaction is violent. Addition of PCl₃ should be extremely cautious and slow. The addition can be carried out safely in the presence of concentrated HCl. Alternatively, a stream of air containing PCl₃ vapor is passed into icecold water and solid crystals of H₃PO₄ form.
Alternatively, phosphorus acid can be prepared by adding phosphorus trichloride to anhydrous oxalic acid:
PCl₃ + 3(COOH）₂ → H₃PO₃ + 3CO + 3CO₂ + 3HCl
In this reaction, all products except H₃PO₃ escape as gases leaving the liquid acid.
Dissolution of phosphorus sesquioxide in water also forms phosphorus acid. When shaken with ice water, phosphorus acid is the only product .
P₄O₆ + 6H₂O → 4H₃PO₃
However, in hot water part of the phosphorus acid disproportionates to phosphoric acid and phosphorus or phosphine.

General Description

Phosphorous acid appears as a white or yellow crystalline solid (melting point 70.1 deg C) or a solution of the solid. Density 1.651 g /cm3 . Contact may severely irritate skin, eyes, and mucous membranes. Toxic by ingestion, inhalation and skin absorption.

Air & Water Reactions

Deliquescent. Absorbs oxygen from the air very readily to form phosphoric acid [Hawley]. Soluble in water.

Reactivity Profile

Phosphorous acid decomposes when heated to form phosphine, a gas that usually ignites spontaneously in air. Absorbs oxygen from the air to form phosphoric acid [Hawley]. Forms yellow deposits in aqueous solution that are spontaneously flammable upon drying. Reacts exothermically with chemical bases (for example: amines and inorganic hydroxides) to form salts. These reactions can generate dangerously large amounts of heat in small spaces. Dissolution in water or dilution of a concentrated solution with additional water may generate significant heat. Reacts in the presence of moisture with active metals, including such structural metals as aluminum and iron, to release hydrogen, a flammable gas. Can initiate the polymerization of certain alkenes. Reacts with cyanide compounds to release gaseous hydrogen cyanide. May generate flammable and/or toxic gases in contact with dithiocarbamates, isocyanates, mercaptans, nitrides, nitriles, sulfides, and strong reducing agents. Additional gas-generating reactions occur with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (to give SO2), and carbonates (to give CO2).

Health Hazard

TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

Fire Hazard

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated.

Flammability and Explosibility

Non flammable

Industrial uses

This collector was developed recently and was used primarily as specific collector for cassiterite from ores with complex gangue composition.On the basis of the phosphonic acid, Albright and Wilson had developed a range of collectors mainly for flotation of oxidic minerals (i.e. cassiterite, ilmenite and pyrochlore). Very little is known about the performance of these collectors. Limited studies conducted with cassiterite and rutile ores showed that some of these collectors produce voluminous froth but were very selective.

Safety Profile

Moderately toxic by ingestion. When heated to decomposition at 200℃ it emits toxic fumes of POx and phosphme whch may ignite. See also PHOSPHINE.