Ethyldichlorosilane Property

Melting point:

-107°C

Boiling point:

74-76°C

Density 

1.089 g/mL at 20 °C(lit.)

refractive index 

n20/D 1.415

Flash point:

-9°C

storage temp. 

Refrigerator

Specific Gravity

1.093

Odor

Sharp, hydrochloric acid-like; acrid.

Hydrolytic Sensitivity

8: reacts rapidly with moisture, water, protic solvents

CAS DataBase Reference

1789-58-8(CAS DataBase Reference)

NIST Chemistry Reference

Ethyldichlorosilane(1789-58-8)

EPA Substance Registry System

Silane, dichloroethyl- (1789-58-8)

Safety

Hazard Codes 

F,C

Risk Statements 

11-14/15-34-37

Safety Statements 

16-26-36/37/39-43-45

RIDADR 

UN 1183 4.3/PG 1

WGK Germany 

1

RTECS 

VV3230000

F 

10-21

TSCA 

Yes

HazardClass 

4.3

PackingGroup 

I

Hazardous Substances Data

1789-58-8(Hazardous Substances Data)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H225Highly Flammable liquid and vapour

H260In contact with water releases flammable gases which may ignite spontaneously

H314Causes severe skin burns and eye damage

H334May cause allergy or asthma symptoms or breathing difficulties if inhaled

H335May cause respiratory irritation

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P223Keep away from any possible contact with water, because of violent reaction and possible flash fire.

P231+P232Handle under inert gas. Protect from moisture.

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P370+P378In case of fire: Use … for extinction.

P422Store contents under …

Ethyldichlorosilane Chemical Properties,Usage,Production

Description

Ethyl dichlorosilane is a colorless liquid witha sharp, irritating odor. Molecular weight = 129.07;Boiling point = 75.5℃; Flash point =-1℃. Explosivelimits: LEL: 2.9%; UEL: unknown. Hazard Identification (based on NFPA-704 M Rating System): Health 3,Flammability 4, Reactivity 2 . Dangerously reactive withwater.

Chemical Properties

Ethyl dichlorosilane is a colorless liquid. Sharp, irritating odor

Chemical Properties

Colorless liquid.Readily hydrolyzed by moisture, with the liberation of hydrogen and hydrogen chloride.

Uses

Intermediate for silicones.

Application

Will form high-boiling polymeric by-products with aqueous work-up.

General Description

A colorless fuming liquid with a pungent odor. Flash point 30°F. Vapor and liquid may cause burns. Denser than water. Vapors heavier than air.

Air & Water Reactions

Highly flammable. Based on the properties of similar materials, there is the possibility that the reaction of Ethyldichlorosilane with water may be vigorous or violent. Products of the reaction include hydrogen chloride. The reaction generates heat and this heat may be sufficient to ignite the product. The chlorosilicon hydrides(ClxSiHy) are spontaneously flammable in air [NFPA 1991].

Reactivity Profile

Chlorosilanes, such as Ethyldichlorosilane, are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.

Hazard

Flammable, dangerous fire risk. Strong irritant to eyes and skin.

Health Hazard

Inhalation irritates mucous membranes. Contact with liquid causes severe burns of eyes and skin. Ingestion causes severe burns of mouth and stomach.

Chemical Reactivity

Reactivity with Water Reacts vigorously, evolving hydrogen chloride (hydrochloric acid); Reactivity with Common Materials: Reaction with surface moisture will generate hydrogen chloride, which corrodes common metals; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Flood with water, rinse with sodium bicarbonate or lime solution; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.

Safety Profile

Poison by ingestion and inhalation. A severe irritant to skin, eyes, and mucous membranes. Corrosive. Dangerous fire hazard if exposed to heat, open flames, or powerful oxidizers. Will react with water or steam to produce heat and toxic and corrosive fumes. To fight fire, use foam, dry chemical, mist, spray. When heated to decomposition it emits toxic fumes of Cland phosgene. See also CHLOROSILANES.

Potential Exposure

This material is used in silicone polymer manufacture.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least30 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. If victim is conscious, administer water ormilk. Do not induce vomiting. Medical observation isrecommended for 24- 48 h after breathing overexposure, aspulmonary edema may be delayed.

storage

(1) Color Code—Red: Flammability Hazard: Storein a flammable liquid storage area or approved cabinetaway from ignition sources and corrosive and reactivematerials. (2) Color Code—White: Corrosive or ContactHazard; Store separately in a corrosion-resistant location.Prior to working with this chemical you should be trainedon its proper handling and storage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist. Ethyldichlorosilane must be stored to avoid contact with moistureand oxidizers (such as perchlorates, peroxides, permanganates, chlorates, and nitrates) since violent reactions occur.Store in tightly closed containers in a cool, well-ventilatedarea away from water, steam, and moisture because toxic andcorrosive chloride gases, including hydrogen chloride can beproduced. Sources of ignition, such as smoking and openflames, are prohibited where ethyl dichlorosilane is handled,used, or stored. Metal containers involving the transfer of 5gallons or more of ethyl dichlorosilane should be groundedand bonded. Drums must be equipped with self-closingvalves, pressure vacuum bungs, and flame arresters. Useonly nonsparking tools and equipment, especially whenopening and closing containers of ethyl dichlorosilane.

Shipping

UN1183 Ethyldichlorosilane, Hazard Class: 4.3; Labels: 4.3-Dangerous when wet material; 8-Corrosive material

Incompatibilities

Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, and epoxides. Chlorosilanes react vigorously with bases and both organic and inorganic acids generating toxic and/or flammable gases. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous hydrogen. Attacks metals in the presence of moisture