TIN (IV) ISOPROPOXIDE Property

Melting point:

130°C (dec.)

Boiling point:

131°C 1,6mm

Density 

0.8387 g/mL at 25 °C

Flash point:

131°C/1.6mm

solubility 

Soluble in hydrocarbons, reacts with alcohols, ketones and esters

form 

Liquid

color 

Colorless

Sensitive 

Moisture Sensitive

Hydrolytic Sensitivity

7: reacts slowly with moisture/water

Exposure limits

ACGIH: TWA 200 ppm; STEL 400 ppm
OSHA: TWA 400 ppm(980 mg/m3)
NIOSH: IDLH 2000 ppm; TWA 400 ppm(980 mg/m3); STEL 500 ppm(1225 mg/m3)

Safety

Hazard Codes 

F,Xi

Risk Statements 

20/21/22-67-36-11

Safety Statements 

23-36/37/39-45-26-16

RIDADR 

UN3180

TSCA 

No

HazardClass 

4.1

PackingGroup 

II

HS Code 

29051220

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Hazard statements

H225Highly Flammable liquid and vapour

H302Harmful if swallowed

H304May be fatal if swallowed and enters airways

H313May be harmful in contact with skin

H314Causes severe skin burns and eye damage

H318Causes serious eye damage

H333May be harmful if inhaled

H336May cause drowsiness or dizziness

H361Suspected of damaging fertility or the unborn child

H373May cause damage to organs through prolonged or repeated exposure

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P405Store locked up.

TIN (IV) ISOPROPOXIDE Chemical Properties,Usage,Production

Chemical Properties

White solid

Uses

Tin(IV) isopropoxide is used as a precursor for the preparation of tin oxide nanoparticles, thin films, indium tin oxide (ITO) films , which shows desired electrochemical and conducting properties. Doped tin oxide nanoparticles and thin films find application as gas sensors.