Chemical Properties Uses Preparation
ChemicalBook > CAS DataBase List > Tin tetrachloride

Tin tetrachloride

Chemical Properties Uses Preparation
Product Name
Tin tetrachloride
CAS No.
7646-78-8
Chemical Name
Tin tetrachloride
Synonyms
SnCl4;TIN CHLORIDE;STANNIC CHLORIDE;Etain;Stagno;Fascat 4400;Tin(IV) chL;Ttin chloride;tinperchloride;Tetrachlorotin
CBNumber
CB2381749
Molecular Formula
Cl4Sn
Formula Weight
260.52
MOL File
7646-78-8.mol
More
Less

Tin tetrachloride Property

Melting point:
-33 °C (lit.)
Boiling point:
114 °C (lit.)
Density 
2.226 g/mL at 25 °C (lit.)
vapor density 
9 (vs air)
vapor pressure 
10 mm Hg ( 10 °C)
refractive index 
1.512
Flash point:
34 °F
storage temp. 
Store at RT.
solubility 
Miscible with alcohol, benzene, toluene, chloroform, acetone, carbon terachloride, gasoline and carbon disulfide.
form 
Solution
Specific Gravity
2.226
color 
Colorless
PH
0.2 (60g/l, H2O, 20℃)Hydrolysis
Water Solubility 
reacts
Sensitive 
Air Sensitive
Hydrolytic Sensitivity
8: reacts rapidly with moisture, water, protic solvents
Merck 
14,8774
Dielectric constant
3.2(22℃)
Exposure limits
ACGIH: TWA 50 ppm
OSHA: TWA 25 ppm; STEL 125 ppm
NIOSH: IDLH 2300 ppm
Stability:
Stability Stable, but may decompose upon exposure to moist air or water. Incompatible with strong bases, alcohols.
LogP
-1.67 at 20℃
CAS DataBase Reference
7646-78-8(CAS DataBase Reference)
NIST Chemistry Reference
Tin tetrachloride(7646-78-8)
EPA Substance Registry System
Stannane, tetrachloro- (7646-78-8)
More
Less

Safety

Hazard Codes 
C,T,F,N
Risk Statements 
34-52/53-40-23/24/25-11-67-37-65-50/53
Safety Statements 
26-45-61-7/8-36/37-24/25-23-36/37/39-16-62
RIDADR 
UN 3264 8/PG 2
WGK Germany 
2
RTECS 
XP8750000
10-21
TSCA 
Yes
HazardClass 
8
PackingGroup 
II
HS Code 
28273990
Hazardous Substances Data
7646-78-8(Hazardous Substances Data)
More
Less

Hazard and Precautionary Statements (GHS)

Symbol(GHS)
Signal word
Danger
Hazard statements

H314Causes severe skin burns and eye damage

H335May cause respiratory irritation

H412Harmful to aquatic life with long lasting effects

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P271Use only outdoors or in a well-ventilated area.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

More
Less

N-Bromosuccinimide Price

Sigma-Aldrich
Product number
208930
Product name
Tin(IV) chloride
Purity
98%
Packaging
250g
Price
$81.1
Updated
2024/03/01
Sigma-Aldrich
Product number
208930
Product name
Tin(IV) chloride
Purity
98%
Packaging
2kg
Price
$386
Updated
2024/03/01
TCI Chemical
Product number
T2053
Product name
Tin(IV) Chloride (ca. 1.0mol/L in Dichloromethane)
Packaging
100mL
Price
$62
Updated
2024/03/01
Alfa Aesar
Product number
011571
Product name
Tin(IV) chloride, anhydrous
Purity
98% (metals basis)
Packaging
500g
Price
$98.4
Updated
2024/03/01
Alfa Aesar
Product number
011571
Product name
Tin(IV) chloride, anhydrous
Purity
98% (metals basis)
Packaging
*4x500g
Price
$225
Updated
2023/06/20
More
Less

Tin tetrachloride Chemical Properties,Usage,Production

Chemical Properties

Tin tetrachloride is a colorless fuming liquid with a pungent odor. Tin tetrachloride is soluble in cold water,alcohol,carbon disulfide, and oil of turpentine, that is decomposed by hot water to form hydrochloric acid with the evolution of heat. Tin tetrachloride is corrosive to metals and tissue.Used as a conductive coating and a sugar bleach,and in drugs, ceramics, soaps,and blue printing.

Uses

Tin(IV) chloride is a mordant for dying fabrics; a stabilizer for perfume in soap; used in weighting silk; in ceramic coatings; in manufacturing blue print papers; and to produce fuchsin. Also, tin(IV) chloride is used in preparing many organotin compounds.

Preparation

Tin(IV) chloride is prepared by reacting tin or tin(II) chloride with chlorine:
Sn + 2Cl2 → SnCl4
SnCl2 + Cl2 → SnCl4

Description

Tin (IV) chloride appears as white crystals with a strong pungent chlorine odour. On heating, tin (IV) chloride decomposition emits acrid fumes. At room temperature, it is colourless and releases fumes on contact with air, giving a stinging odour. Stannic chloride was used as a chemical weapon during World War I. It is also used in the glass container industry for making an external coating that toughens the glass. Stannic chloride is used in chemical reactions with fuming (90%) nitric acid for the selective nitration of activated aromatic rings in the presence of unactivated ones. Tin (IV) chloride reacts violently with water or moist air to produce corrosive hydrogen chloride. Tin (IV) chloride reacts with turpentine, alcohols, and amines, causing fire and explosion hazard. It attacks many metals, some forms of plastic, rubber, and coatings.

Chemical Properties

Tin tetrachloride is a colorless fuming liquid.

Chemical Properties

Stannic chloride is a white to yellow powder with a faint odor of HCl.

Chemical Properties

Colorless, fuming, caustic liquid, that water converts into a crystalline solid, SnCl4?5H2O.Keep well stoppered. Soluble in cold water, alcohol, carbon disulfide; decomposed by hot water.

Physical properties

Colorless fuming liquid; corrosive; density 2.234 g/mL; freezes at -33°C; boils at 114.15°C; critical temperature 318.75°C; critical pressure 37.98 atm; critical volume 351 cm3/mol; soluble in cold water, evolving heat; decomposed by hot water; soluble in alcohol, benzene, toluene, chloroform, acetone and kerosene
The pentahydrate is a yellowish-white crystalline solid or small, fused lumps; faint odor of HCl; density 2.04 g/cm3; decmposes at 56°C; very soluble in water; soluble in ethanol.

Uses

Tin(IV) chloride is a precursor to prepare organotin compounds such as tetralkyltin and dialkyldichlorotin(IV), which find applications as catalysts and polymer stabilizers. As a Lewis acid catalyst, it is used in Fridel-Crafts reactions for alkylation and cyclization. It is involved in the selective nitration of aromatic compounds in the presence of fuming nitric acid. Furthermore, it is used to prepare tin(IV) oxide coating by sol-gel process.

Uses

Electroconductive and electroluminescent coatings, mordant in dyeing textiles, perfume stabilization, manufacture of fuchsin, color lakes, ceramic coatings, bleaching agent for sugar, stabilizer for certain resins, manufacture of blueprint and other sensitized papers, other tin salts, bacteria and fungi control in soaps

Preparation

Tin(II) chloride is prepared by dissolving tin in hydrochloric acid followed by evaporation of the solution and crystallization.

Definition

Often sold in the form of the double salt with sodium chloride: Na2SnCl6?H2O.

General Description

Stannic chloride (SnCl4) is a strong Lewis acid widely used as a promoter or catalyst in organic synthesis. It is soluble in most organic solvents.

Air & Water Reactions

Fumes in moist air. Reacts with water to form Hydrochloric Acid in dense white fumes [Merck 11th ed. 1989].

Reactivity Profile

Acidic salts, such as STANNIC CHLORIDE, are generally soluble in water. The resulting solutions contain moderate concentrations of hydrogen ions and have pH's of less than 7.0. They react as acids to neutralize bases. These neutralizations generate heat, but less or far less than is generated by neutralization of inorganic acids, inorganic oxoacids, and carboxylic acid. They usually do not react as either oxidizing agents or reducing agents but such behavior is not impossible. Many of these compounds catalyze organic reactions (ethylene oxide polymerization). Combination of the chloride with turpentine is strongly exothermic, and may lead to ignition, [Mellor, 1941, Vol. 7, 446].

Hazard

Evolves heat on contact with moisture. Corrosive liquid

Health Hazard

CORROSIVE and/or TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Fire will produce irritating, corrosive and/or toxic gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Contact with molten substance may cause severe burns to skin and eyes. Runoff from fire control or dilution water may cause pollution.

Fire Hazard

EXCEPT FOR ACETIC ANHYDRIDE (UN1715), THAT IS FLAMMABLE, some of these materials may burn, but none ignite readily. May ignite combustibles (wood, paper, oil, clothing, etc.). Substance will react with water (some violently), releasing corrosive and/or toxic gases and runoff. Flammable/toxic gases may accumulate in confined areas (basement, tanks, hopper/tank cars, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water. Substance may be transported in a molten form.

Safety Profile

Poison by intraperitoneal route. Moderately toxic by inhalation. A corrosive irritant to skin, eyes, and mucous membranes. Combustible by chemical reaction. Upon contact with moisture, considerable heat is generated. Violent reaction with K, Na, turpentine, ethylene oxide, alkyl nitrates. Dangerous; hydrochloric acid is liberated on contact with moisture or heat. When heated to decomposition it emits toxic fumes of Cl-. See also HYDROCHLORIC ACID.

Potential Exposure

Tin tetrachloride is used in the production of blueprints and electroconductive readings, as a bleaching agent for sugar and resin stabilizer.

Shipping

UN2440 Stannic chloride, pentahydrate, Hazard class: 8; Labels: 8-Corrosive material.

Purification Methods

SnCl4 fumes in moist air due to formation of a hydrate. Fractionate it in a ground glass still and store it in the absence of air. Possible impurities are SO2 and HCl [Baudler in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I p 729 1963]. It forms a solid pentahydrate [10026-06-9] which smells of HCl and is obtained when the anhydrous salt is dissolved in a small volume of H2O. Also reflux it with clean mercury or P2O5 for several hours, then distil it under (reduced) N2 pressure into a receiver containing P2O5. Finally redistil it. Alternatively, distil it from Sn metal under vacuum in an all-glass system and seal off in large ampoules. SnCl4 is available commercially as 1M solutions in CH2Cl2 or hexane. HARMFUL VAPOURS.

Incompatibilities

Slowly forms hydrochloric acid in cold water; fast reaction in hot water and steam. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, water, turpentine, potassium, sodium, ethylene oxide; nitrates, alcohols, amines, chlorine, strong acids; strong bases. Attacks metals, rubbers and some plastics in the resence of moisture.

Waste Disposal

SnCl4: Pour onto sodium bicarbonate; spray with ammonium hydroxide while adding crushed ice; when reaction subsides, flush down drain.

More
Less

Tin tetrachloride Suppliers

Shanghai Ze Chong Pharmaceutical Technology Co., Ltd.
Tel
021-67308028 18621330623
Email
sales@zechongchem.com
Country
China
ProdList
60
Advantage
58
SHANGHAI BANGCHENG CHEMICAL Co.,Ltd.
Tel
021-69106960 13701823733
Fax
021-69106780
Email
13701823733@163.com
Country
China
ProdList
4767
Advantage
60
Shandong Tianshili Biological Technology Co. LTD
Tel
18663779269 18765889670
Fax
18663779269
Email
TSL15098984171@163.com
Country
China
ProdList
180
Advantage
58
Zhoushan Aike Biotechnology Co., Ltd.
Tel
0575-85624575 18957583039
Email
153736735@qq.com
Country
China
ProdList
139
Advantage
58
Shanghai hongrui chemical co., ltd
Tel
13906273813 13485185589
Email
834955168@qq.com
Country
China
ProdList
35
Advantage
58
Tianjin Zhongxin Chemtech Co., Ltd.
Tel
022-66880623
Fax
86(0)22-66880086
Email
sales@tjzxchem.com
Country
China
ProdList
613
Advantage
60
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108 18621169109
Fax
86-21-61259102
Email
market03@meryer.com
Country
China
ProdList
40228
Advantage
62
INTATRADE GmbH
Tel
+49 3493/605464
Fax
+49 3493/605470
Email
sales@intatrade.de
Country
Germany
ProdList
3572
Advantage
66
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
Email
saleschina@alfa-asia.com
Country
China
ProdList
30123
Advantage
84
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Fax
021-67121385
Email
Sales-CN@TCIchemicals.com
Country
China
ProdList
24529
Advantage
81
More
Less

View Lastest Price from Tin tetrachloride manufacturers

Hebei Weibang Biotechnology Co., Ltd
Product
Tin tetrachloride 7646-78-8
Price
US $10.00/KG
Min. Order
1KG
Purity
99%
Supply Ability
10 mt
Release date
2024-11-19
Hebei Mojin Biotechnology Co., Ltd
Product
Tin tetrachloride 7646-78-8
Price
US $35000.00/kg
Min. Order
25kg
Purity
99.99%
Supply Ability
20ton
Release date
2023-08-14
Career Henan Chemical Co
Product
Tin tetrachloride 7646-78-8
Price
US $2.00/KG
Min. Order
1KG
Purity
99%min
Supply Ability
200kg
Release date
2020-03-06

7646-78-8, Tin tetrachlorideRelated Search:


  • STANNIC TETRACHLORIDE
  • STANNIC CHLORIDE
  • STANNIC CHLORIDE HYDRATE
  • TIN CHLORIDE
  • TIN(+4)CHLORIDE
  • TIN(+4)CHLORIDE HYDRATE
  • TIN TETRACHLORIDE
  • TIN (IV) CHLORIDE, HYDROUS
  • TIN(IV) CHLORIDE N-HYDRATE
  • Anhydrous tin tetrachloride
  • Etain
  • Etain (tetrachlorure d')
  • etain(tetrachlorured’)
  • etain(tetrachlorured’)(french)
  • Fascat 4400
  • Libavius Fuming spirit
  • Libavius' fuming spirit
  • libaviusfumingspirit
  • SnCl4
  • Stagno
  • Stagno (tetracloruro di)
  • Tin(iv) chloride (1:4)
  • Tin(IV) tetrachloride
  • tin(iv)chloride(1:4)
  • tin(iv)tetrachloride
  • tinchloride(sncl4)
  • tinperchloride
  • tintetrachloride,anhydrous
  • Zinntetrachlorid
  • Tin chloride anhydrous
  • Ttin chloride
  • STANNAOUS CHLORIDE
  • Tin(Ⅳ)chloride anhydrous
  • TIN(IV) CHLORIDE, 1.0M SOLUTION IN HEPTA NE
  • TIN(IV) CHLORIDE, 99.995%
  • Tin(IV) chloride fuming
  • TIN(IV) CHLORIDE, 1.0M SOLUTION IN DICHL OROMETHANE
  • TIN TETRACHLORIDE SOLUTION, ~1 M IN DICH LOROMETHANE
  • Tin(IV)chloride,99.99%(metalsbasis)
  • stannic chloride fuming
  • Tin(IV) chloride solution
  • Tin(IV)chloride,anhydrous,98%(metalsbasis)
  • Tin(IV) chloride, 1M solution in dichloromethane
  • Tin(IV) chloride, 99.999%
  • Tin(IV)chloride,anhydrous,98%
  • STANNICCHLORIDE,ANHYDROUS,REAGENT
  • Tin(IV) chloride, anhydrous, 99% 100ML
  • Tin(IV) chloride, 99.999%, (trace Metal basis)
  • Anhydrous Stannic Chloride
  • TIN(IV) CHLORIDE EXTRA PURE 500 ML
  • Tin(Ⅳ) chloride
  • The fourtin chlorideanhydrous
  • Tin(IV) chloride 99.995% trace Metals basis
  • Tin(IV) chloride solution 1.0 M in heptane
  • Tin(IV) chloride solution 1.0 M in Methylene chloride
  • Tin(IV) chloride, 1.0 M solution in dichloroMethane, SpcSeal
  • Tin(IV) chloride, 98% (as SnCl4), SpcSeal
  • stagno(tetraclorurodi)