PHOSPHAMIDON Property

Melting point:

120-123℃

Boiling point:

bp1.5 162°; bp0.001 120°

Density 

1.2132 g/cm³ (20 ºC)

vapor pressure 

2.2×10^-3 Pa (25 °C)

refractive index 

1.4718 (589.3 nm 25℃)

storage temp. 

2-8°C

form 

liquid

Water Solubility 

Totally miscible

pka

-1.61±0.70(Predicted)

Merck 

13,7423

BRN 

8323501

EPA Substance Registry System

Phosphamidon (13171-21-6)

Safety

Hazard Codes 

T+,N

Risk Statements 

24-28-50/53-68

Safety Statements 

23-36/37-45-60-61

RIDADR 

3018

WGK Germany 

3

RTECS 

TC2800000

HazardClass 

6.1(a)

PackingGroup 

II

HS Code 

29241200

Hazardous Substances Data

13171-21-6(Hazardous Substances Data)

Toxicity

LD50 orally in rats: 24 mg/kg (Gaines)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H341Suspected of causing genetic defects

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P201Obtain special instructions before use.

P202Do not handle until all safety precautions have been read and understood.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

PHOSPHAMIDON Chemical Properties,Usage,Production

Description

Types of phosphamidon formulations include soluble liquid, suspension concentrate and emulsifiable concentrate, ULV liquid, and 10% granules Phosphamidon is a pale yellow to colourless oily liquid with a faint odour. It is miscible with water and is soluble in aromatic hydrocarbons. Technical phosphamidon is a pale yellow to colourless oily liquid with a faint odour. It consists of a mixture of (Z)-isomer and (E)-isomer in the approximate proportion of 70:30. It decomposes on heating and releases highly toxic fumes such as phosphorus oxides, hydrogen chloride, and nitrogen oxides. Phosphamidon reacts and gets rapidly hydrolysed by alkalis and decomposes on heating or on burning, producing highly toxic fumes. It attacks metals such as iron, tin, and aluminium. It is used as a broad-spectrum insecticide and acaricide for the control of pests and vectors on crops like sugarcane, rice, citrus orchards, and cotton.

Chemical Properties

Phosphamidon is a pale yellow to colorless oily liquid with a faint odor. It is miscible with water and is soluble in aromatic hydrocarbons. Phosphamidon decomposes on heating and releases highly toxic fumes, such as phosphorus oxides, hydrogen chloride, and nitrogen oxides. It reacts with bases (hydrolysis) and attacks metals such as iron, tin, and aluminium. Phosphamidon should be handled by trained personnel wearing protective clothing. Phosphamidon is used as a broad-spectrum insecticide and acaricide for the control of pests and vectors on crops like sugar cane, rice, citrus orchards, and cotton. Occupational exposures to phosphamidon occur among factory workers involved in synthesizing formulation and dispensing spray operations. Human exposures also occur among crop harvesters and in vector control operations.

Chemical Properties

Phosphamidon is a pale yellow oily liquid

Uses

Insecticide used to control sap-feeding insects and other pests in a wide variety of crops

Uses

Phosphamidon is used to control sucking and boring insects and mites in a very wide range of crops and in forestry applications.

Uses

Insecticide.

Definition

ChEBI: Phosphamidon is a trialkyl phosphate, an organophosphate insecticide, an organochlorine insecticide and an organophosphate nematicide. It has a role as an EC 3.1.1.7 (acetylcholinesterase) inhibitor, an EC 3.1.1.8 (cholinesterase) inhibitor, an acaricide and an agrochemical. It is functionally related to a N,N-diethyl-3-hydroxybut-2-enamide.

General Description

Pale yellow oily liquid with a faint odor. Used as an insecticide for citrus, cotton, and deciduous fruit and nuts. and as an acaricide.

Air & Water Reactions

Water soluble. Hydrolyzed by alkali with a half-life at 73°F of 13.8 days at pH 7 and 2.2 days at pH 10 .

Reactivity Profile

PHOSPHAMIDON is corrosive to iron, tin and aluminum. Incompatible with alkaline preparations and should not be mixed with copper oxychloride, captan, folpet or sulfur.

Health Hazard

PHOSPHAMIDON is extremely toxic; the probable oral lethal dose for humans is 5-50 mg/kg, or between 7 drops and 1 teaspoonful for a 150-lb person. It is a cholinesterase inhibitor.

Health Hazard

Phosphamidon is readily absorbed from the gastrointestinal tract, through the intact skin, and by inhalation of spray mists and dusts. Prolonged exposures to phosphamidon cause adverse effects and impairment on the respiratory, myocardial, and neuromuscular transmission in animals and humans. Phosphamidon does not cause delayed peripheral neuropathy in hens. The symptoms of poisoning include, but are not limited to, nausea, vomiting, diarrhea, abdominal cramps, headache, dizziness, eye pain, blurred vision, constriction or dilation of the pupils, tears, salivation, sweating, and confusion. Prolonged period of exposures to phosphamidon cause incoordination, slurred speech, loss of refl exes, weakness, fatigue, involuntary muscle contractions, twitching, tremors of the tongue or eyelids, and eventually paralysis of the body extremities and the respiratory muscles, involuntary defecation or urination, psychosis, irregular heart beat, unconsciousness, convulsions, coma, respiratory failure or cardiac arrest leading to death. Phosphamidon has caused clastogenic effects in the bone marrow cells of rats and mice. However, the studies are found to be inadequate to arrive at meaningful conclusions about phosphamidon as a human carcinogen and no data are available. The ADI for phosphamidon has been reported as 0.0005 mg/kg body weight. (ADI: acceptable daily intake is an estimate of the amount of a pesticide, expressed on a body weight basis, which can be ingested daily over a lifetime without appreciable health risk.)

Fire Hazard

(Non-Specific -- Organophosphorus Pesticide, Liquid, n.o.s.) Container may explode in heat of fire. Heat above 320F may cause decomposition and evolution of highly toxic fumes of phosphorus oxides and chlorides. Hydrolyzes in alkali. Stable in neutral and acid media. Hydrolyzes in alkali.

Potential Exposure

This material is used as an insecticide on citrus, cotton, and deciduous fruit and nuts. It is also an acaricide.

Environmental Fate

Chemical/Physical. Emits toxic fumes of chlorine, phosphorus and nitrogen oxides when heated to decomposition (Sax and Lewis, 1987)

Metabolic pathway

The metabolism of phosphamidon has been reviewed by Geissbuhler et al. (1971) and Beynon et al. (1973). Technical phosphamidon consists of two stereochemical isomers in the E:Z ratio of ca. 3:7. The Z-isomer has the greater insecticidal activity. It is important to note that in the case of phosphamidon the isomer with the phosphate ester function trans to the amide group is assigned the Z configuration due to the priority of chlorine, whereas in the case of mevinphos, monocrotophos and dicrotophos it is assigned the E configuration. In all four compounds, the isomers with this configuration (also referred to as the cis-crotonamide or crotonate structure) have the greater insecticidal activities. It is a systemic insecticide which is rapidly translocated in the plant via the xylem. Phosphamidon is rapidly degraded in the environment, the major routes being via N-de-ethylation and cleavage of the P-O-vinyl function. The resultant N,N-diethyl-2-chloroacetoacetamide or N-ethyl-2-chloroacetoacetamide are then degraded via dechlorination and hydrolysis, ultimately to give acetone, diethylamine and ethylamine. Conjugated metabolites have not been identified.

Metabolism

The major routes of degradation are oxidative dealkylation of the amide group and hydrolysis of the vinyl phosphate ester bond. Dechlorination also occurs. In soils, DT₅₀ is 7–25 d depending upon the soil type.

Shipping

UN3018 Organophosphorus pesticides, liquid, toxic, Hazard Class: 6.1; Labels: 6.1-Poisonous materials.

Toxicity evaluation

The acute oral LD₅₀ for rats is 17.9–30 mg/kg. Inhalation LC50 (4 h) for rats is about 0.18 mg/L air. NOEL (2 yr) for rats is 1.25 mg/kg b.w. daily. ADI is 0.5 μg/kg b.w. Phosphamidon administered in animals is rapidly metabolized, and 85–90% of the dose is excreted within 24 h almost all in the urine.

Degradation

Phosphamidon is rapidly hydrolysed by alkali (PM) but it is relatively stable at neutral and acidic pH values. In alkaline solution, the compound is hydrolysed to N,N-diethyl-2-chloroacetoacetamide (2) and dimethyl phosphate (3) (Anliker and Beringer, 1971). There was apparently no attack on the P-O-Me bond to give the desmethyl compound. In acidic solution compound 2 was hydrolysed to give chloroacetone (4), diethylamine (5) and C0₂. In alkaline solution 2 was dechlorinated and hydrolysed to acetone (6), acetic acid (7) and glycolic acid diethylamide (8). These pathways are shown in Scheme 1.

Incompatibilities

Compounds of the carboxyl group react with all bases, both inorganic and organic (i.e., amines) releasing substantial heat, water and a salt that may be harmful. Incompatible with arsenic compounds (releases hydrogen cyanide gas), diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides (releasing heat, toxic and possibly flammable gases), thiosulfates and dithionites (releasing hydrogen sulfate and oxides of sulfur). Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Strong oxidizers may cause release of toxic phosphorus oxides. Organophosphates, in the presence of strong reducing agents such as hydrides, may form highly toxic and flammable phosphine gas. Keep away from alkaline materials. Attacks metals, such as aluminum, iron, tin.

Waste Disposal

Small quantities may be treated with alkali followed by landfill disposal. Large quantities should be incinerated with effluent gas scrubbing. In accordance with 40CFR165, follow recommendations for the disposal of pesticides and pesticide containers. Must be disposed properly by following package label directions or by contacting your local or federal environmental control agency, or by contacting your regional EPA office.