thorium disilicide Property

Melting point:

1850°C

Density 

7.900

form 

tetragonal crystals

color 

tetragonal crystals, crystalline

Crystal Structure

Tetragonal

Stability:

Corrosion resistant to molten Cu; corroded by molten Ni

EPA Substance Registry System

Thorium silicide (ThSi2) (12067-54-8)

Hazard and Precautionary Statements (GHS)

thorium disilicide Chemical Properties,Usage,Production

Chemical Properties

black tetr; -80 mesh with 99.5% purity [CER91] [CRC10]
Grayish-white crystals with a metallic luster and good thermal and electrical conductivity, d (ThSi2) 7.63.

Production Methods

Brauer and Mitius modified a method developed by Honigschmid and prepare ThSi3 by the following procedure. Intimate mixtures of Al, Th and Silumin (13% Si, 87% Al) powders are compressed into tablets 10 mm long and 5 mm thick, placed in alumina crucibles and fused at 1100°C in high vacuum. Slow cooling (from 1100°C to 800°C in four hours) produces good product crystals within the aluminium ingot. These are freed of excess Al by alternate treatments with dilute hydrochloric acid and potassium hydroxide (moderate heating), followed by washing with water and alcohol. Since most of the silicide particles form cohesive granules with the Si and SiO2 contaminants, the crystallites are pulverized in an agate mortar and separated from foreign matter (particularly SiO2, which cannot be removed by chemical means) by flotation with bromoform (d 2.9). The bromoform must be continuously renewed. Evaporation with hydrofluoric acid is not practical, since it destroys the silicide.