ALDOL Property

Melting point:

<25 °C

Boiling point:

bp20 83°

Density 

d16 1.109

vapor density 

3.04

refractive index 

1.4238

Flash point:

150°F (OC)

pka

14.50±0.20(Predicted)

color 

Clear, white-to-yellow syrupy liquid

EPA Substance Registry System

Acetaldol (107-89-1)

Safety

Hazard Codes 

T

Risk Statements 

24-36

Safety Statements 

26-28-36/37-45

RIDADR 

2839

HazardClass 

6.1(a)

PackingGroup 

II

Hazardous Substances Data

107-89-1(Hazardous Substances Data)

Toxicity

LD50 orally in rats: 2.18 g/kg (Smyth)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H310Fatal in contact with skin

H319Causes serious eye irritation

Precautionary statements

P262Do not get in eyes, on skin, or on clothing.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P270Do not eat, drink or smoke when using this product.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P350IF ON SKIN: Gently wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P310Immediately call a POISON CENTER or doctor/physician.

P322Specific measures (see …on this label).

P361Remove/Take off immediately all contaminated clothing.

P363Wash contaminated clothing before reuse.

P405Store locked up.

P501Dispose of contents/container to..…

ALDOL Chemical Properties,Usage,Production

Chemical Properties

Aldol is a flammable, colorless to pale yellow, syrupy liquid. Pungent odor

Uses

Acetaldol is manufactured by condensing of acetaldehyde in aqueous NaOH and is used to produce rubber vulcanizers, accelerators and age retardants, perfumes, and in ore flotation. It is a hypnotic and sedative.

Uses

manufacture of rubber vulcanizers, accelerators and age resisters; in perfumes; ore flotation.

General Description

A clear white to yellow syrupy liquid. Denser than water. Flash point 150°F. Contact may irritate skin and eyes. Moderately toxic by ingestion, inhalation and skin absorption.

Air & Water Reactions

Soluble in water.

Reactivity Profile

An aldehyde and alcohol. Aldehydes are frequently involved in self-condensation or polymerization reactions. These reactions are exothermic; they are often catalyzed by acid. Aldehydes are readily oxidized to give carboxylic acids. Flammable and/or toxic gases are generated by the combination of aldehydes with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing agents. Aldehydes can react with air to give first peroxo acids, and ultimately carboxylic acids. These autoxidation reactions are activated by light, catalyzed by salts of transition metals, and are autocatalytic (catalyzed by the products of the reaction). The addition of stabilizers (antioxidants) to shipments of aldehydes retards autoxidation. Flammable and/or toxic gases are generated by the combination of alcohols with alkali metals, nitrides, and strong reducing agents. They react with oxoacids and carboxylic acids to form esters plus water. Oxidizing agents convert them to aldehydes or ketones. Alcohols exhibit both weak acid and weak base behavior. They may initiate the polymerization of isocyanates and epoxides.

Health Hazard

TOXIC; inhalation, ingestion or skin contact with material may cause severe injury or death. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

Fire Hazard

Combustible material: may burn but does not ignite readily. When heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form.

Safety Profile

Poison via skin contact. Moderately toxic by ingestion. A skin and eye irritant. A flammable liquid and fire hazard when exposed to heat or flame; emits crotonaldehyde and water when heated. See CROTONALDEHYDE. Can react with oxidtzing materials.

Potential Exposure

Aldol is used as a solvent and to manufacture rubber accelerators, perfumes; in fungicides; and in engraving, cadmium plating

Shipping

UN2839 Aldol, Hazard Class: 6.1; Labels: 6.1Poison Inhalation Hazard

Purification Methods

An ethereal solution of aldol is washed with a saturated aqueous solution of NaHCO3, then with water. The non-aqueous layer is dried with anhydrous CaCl2 and distilled immediately before use. The fraction, b 80-81o/20mm, is collected as a thick liquid which decomposes at 85o/atm. It is a sedative and a hypnotic but is used in perfumery. [Mason et al. J Am Chem Soc 76 2255 1954]. [Beilstein 1 H 824, 1 I 419, 1 II 868, 1 III 3195, 1 IV 3984.]

Incompatibilities

Danger! May be subject to spontaneous polymerization. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires orexplosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Contact with metals may evolve flammable hydrogen gas. Heat above 83 C causes the formation of crotonaldehyde vapor (which may cause explosion) and water.

Waste Disposal

Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.