2-Methylsuccinic acid Property

Melting point:

110-115 °C (lit.)

Boiling point:

164.01°C (rough estimate)

alpha 

[α]D20 -1～+1° (c=5, C2H5OH)

Density 

1.0951 (rough estimate)

refractive index 

1.4240 (estimate)

storage temp. 

Sealed in dry,Room Temperature

solubility 

Chloroform (Slightly), DMSO (Sparingly), Methanol (Slightly)

form 

Solid

pka

4.13(at 25℃)

color 

White to Off-White

PH

3.62(1 mM solution);3.08(10 mM solution);2.57(100 mM solution)

Water Solubility 

Soluble in water.

BRN 

1722946

Stability:

Stable. Combustible. Incompatible with bases, oxidizing agents, reducing agents.

CAS DataBase Reference

498-21-5(CAS DataBase Reference)

NIST Chemistry Reference

Butanedioic acid, methyl-(498-21-5)

EPA Substance Registry System

Butanedioic acid, 2-methyl- (498-21-5)

Safety

Hazard Codes 

Xi

Risk Statements 

36/37/38

Safety Statements 

26-36

WGK Germany 

3

TSCA 

Yes

HS Code 

29171900

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H315Causes skin irritation

H319Causes serious eye irritation

H335May cause respiratory irritation

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P271Use only outdoors or in a well-ventilated area.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

2-Methylsuccinic acid Chemical Properties,Usage,Production

Description

Methylsuccinic acid is a normal metabolite found in human fluids and is an intermediate metabolite in the breakdown of fatty acids. Increased urinary levels of methylsuccinic acid (together with ethylmalonic acid) are the main biochemical measurable features in ethylmalonic encephalopathy.

Chemical Properties

white to beige crystalline powder

Uses

Methylsuccinic acid is used as a flux material and an important dyestuff intermediate. It is also used as an intermediate in medicine and pharmaceuticals.

Definition

ChEBI: 2-methylbutanedioic acid is a dicarboxylic acid that is butanedioic acid substituted at position 2 by a methyl group. It is a conjugate acid of a methylsuccinate.

Preparation

A common method employed for the synthesis of alkanedioic acids involves the oxidation of lactone derivatives. However, in the case of y-butyrolactones, the oxidations have proven particularly challenging due to the stability of the five-membered lactones. A successful approach to this type of oxidative preparation involves the carboxylation of γ-butyrolactone using carbon monoxide and hydrogen fluoride-antimony(V) fluoride superacid containing an excess of antimony(V) fluoride to afford 2-methylsuccinic acid.

Synthesis of 2-Methylsuccinic Acid from y-Butyrolactone

Origin

2-Methylsuccinic acid is a natural product found in African aloe vera.

General Description

White or yellowish crystals or beige powder.

Air & Water Reactions

Water soluble.

Reactivity Profile

Carboxylic acids, such as 2-Methylsuccinic acid, donate hydrogen ions if a base is present to accept them. They react in this way with all bases, both organic (for example, the amines) and inorganic. Their reactions with bases, called "neutralizations", are accompanied by the evolution of substantial amounts of heat. Neutralization between an acid and a base produces water plus a salt. Carboxylic acids with six or fewer carbon atoms are freely or moderately soluble in water; those with more than six carbons are slightly soluble in water. Soluble carboxylic acid dissociate to an extent in water to yield hydrogen ions. The pH of solutions of carboxylic acids is therefore less than 7.0. Many insoluble carboxylic acids react rapidly with aqueous solutions containing a chemical base and dissolve as the neutralization generates a soluble salt. Carboxylic acids in aqueous solution and liquid or molten carboxylic acids can react with active metals to form gaseous hydrogen and a metal salt. Such reactions occur in principle for solid carboxylic acids as well, but are slow if the solid acid remains dry. Even "insoluble" carboxylic acids may absorb enough water from the air and dissolve sufficiently in 2-Methylsuccinic acid to corrode or dissolve iron, steel, and aluminum parts and containers. Carboxylic acids, like other acids, react with cyanide salts to generate gaseous hydrogen cyanide. The reaction is slower for dry, solid carboxylic acids. Insoluble carboxylic acids react with solutions of cyanides to cause the release of gaseous hydrogen cyanide. Flammable and/or toxic gases and heat are generated by the reaction of carboxylic acids with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides. Carboxylic acids, especially in aqueous solution, also react with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), to generate flammable and/or toxic gases and heat. Their reaction with carbonates and bicarbonates generates a harmless gas (carbon dioxide) but still heat. Like other organic compounds, carboxylic acids can be oxidized by strong oxidizing agents and reduced by strong reducing agents. These reactions generate heat. A wide variety of products is possible. Like other acids, carboxylic acids may initiate polymerization reactions; like other acids, they often catalyze (increase the rate of) chemical reactions.

Health Hazard

ACUTE/CHRONIC HAZARDS: 2-Methylsuccinic acid may be harmful by inhalation, ingestion or skin absorption. When heated to decomposition it emits toxic fumes of carbon monoxide and carbon dioxide.

Fire Hazard

Flash point data for 2-Methylsuccinic acid are not available; however, 2-Methylsuccinic acid is probably combustible.

Synthesis

It can be prepared by partial hydrogenation of itaconic acid over Raney nickel. Alternatively, hydrocyanation of ethyl crotonate affords an intermediate, which converts to 2-methylsuccinic acid after hydrolysis of the ester and nitrile substituents.

First aid

Eyes: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Skin: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
Inhalation: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.
Ingestion: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital.

Purification Methods

Crystallise the acid from water. [Beilstein 2 IV 1948.]