PHENYLARSONIC ACID Property

Melting point:

160 °C

Boiling point:

66 °C(Press: 1 Torr)

Density 

1,76 g/cm³

solubility 

3.2% in water and 15.5% in ethanol.

pka

pK2: 8.48(+1) (22°C)

form 

Powder

color 

white

Specific Gravity

1.76

Water Solubility 

31.6g/L(28 ºC)

Merck 

14,1067

CAS DataBase Reference

98-05-5(CAS DataBase Reference)

EPA Substance Registry System

Benzenearsonic acid (98-05-5)

Safety

Hazard Codes 

N-T

Risk Statements 

50/53-23/25

Safety Statements 

61-60-45-28A-20/21

RIDADR 

3280

RTECS 

CY3150000

TSCA 

Yes

HazardClass 

6.1

PackingGroup 

III

HS Code 

29310099

Hazardous Substances Data

98-05-5(Hazardous Substances Data)

Toxicity

LDLo orl-rat: 50 mg/kg JPETAB 93,287,48

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H301Toxic if swalloed

H331Toxic if inhaled

H400Very toxic to aquatic life

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P405Store locked up.

PHENYLARSONIC ACID Chemical Properties,Usage,Production

Description

Benzenearsonic acid is a colorless, crystallinepowder. Molecular weight = 202.05; Specific gravity(H2O:1)= 1.76; Freezing/Melting point=160℃ (decomposes). Hazard Identification (based on NFPA-704 MRating System): Health 4, Flammability 1, Reactivity 0.Soluble in water.

Chemical Properties

white to slightly yellow crystalline powder

Chemical Properties

Benzenearsonic acid is a colorless, crystalline powder.

Uses

Arsonic acids (arsonic acid, phenylarsonic acid, p-hydroxyphenylarsonic acid, arsanilic acid) react with the tetravalent metals of group IV of the periodic system to give water-insoluble complexes of composition MA2 . The composition of the precipitates is not exactly stoichiometric, and hence the precipitates are not suitable for direct gravimetric analysis. Instead, the precipitates are transformed by ignition to the corresponding metal oxides and weighed as such. The main advantage of the application of these reagents is the possibility offered of the selective determination of zirconium(IV), hafnium(IV) and titanium(IV) in the presence of many other metals, such as zinc, manganese, nickel, cobalt, aluminium, copper, calcium, magnesium and chromium. In practice they are utilized most frequently for the determination of zirconium.
In strong mineral acidic media phenylarsonic acid forms water-insoluble precipitates with zirconium and hafnium only. In highly concentrated acetic acid solution the thorium phenylarsonate complex is also precipitated, which makes possible the separation of thorium from rare earth metals.
The procedure gives satisfactory results in the presence of alkaline earth metals, iron, aluminium, manganese, cobalt, nickel, copper, zinc and bismuth.

Uses

Reagent for tin.

Definition

ChEBI: Phenylarsonic acid is an organoarsonic acid and a member of arsonic acids. It is a conjugate acid of a phenylarsonate(1-).

General Description

Colorless solid. Used as an analytical reagent for tin.

Reactivity Profile

PHENYLARSONIC ACID emits poisonous fumes of arsenic when heated to decomposition. [EPA, 1998].

Health Hazard

PHENYLARSONIC ACID is a deadly poison. (Non-Specific -- Arsenic Compounds) Chronic exposure to arsenic compounds can cause dermatitis and digestive disorders. Renal damage may develop.

Fire Hazard

PHENYLARSONIC ACID emits poisonous fumes of arsenic when heated to decomposition.

Safety Profile

A deadly poison by ingestion andintravenous routes. When heated to decomposition it emits toxic fumes of As.

Potential Exposure

This material is used as an analytical reagent for tin.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Speed in removing material from skinis of extreme importance. Shampoo hair promptly if contaminated. Seek medical attention immediately. If thischemical has been inhaled, remove from exposure, beginrescue breathing (using universal precautions, includingresuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.
Note to physician: For severe poisoning BAL [British AntiLewisite, dimercaprol, dithiopropanol (C3H8OS2)] has beenused to treat toxic symptoms of certain heavy metals poisoning—including arsenic. Although BAL is reported tohave a large margin of safety, caution must be exercisedbecause toxic effects may be caused by excessive dosage.Most can be prevented by premedication with 1-ephedrinesulfate (CAS: 134-72-5). For milder poisoning penicillamine (not penicillin) has been used, both with mixed success. Side effects occur with such treatment and it is nevera substitute for controlling exposure. It can only be doneunder strict medical care

storage

Color Code—Blue: Health Hazard/Poison: Storein a secure poison location. Store in tightly closed containers in a cool, well-ventilated area.

Shipping

UN3280 Organoarsenic compound, liquid, n.o.s., Hazard Class: 6.1; Labels: 6.1—Poisonous materials, Technical Name Required. Potential Inhalation Hazard (Special Provision 5).

Purification Methods

Crystallise it from H2O (3mL/g) between 90o and 0o. Alternatively dissolve 600g of the acid in 500mL of boiling H2O, add 20g of Norite, filter hot, cool, filter off the crystals and dry them. On heating at ~154-160o it is converted to the anhydride. [Bullard & Dickery Org Synth Coll Vol II 494 1943, for the 4-nitro derivative see Ruddy & Starkey Org Synth Coll Vol III 665 1955, Beilstein 16 H 868, 16 I 448, 16 II 457, 16 III 1057, 16 IV 1183.]