METHYL 6-QUINOLINEACETATE
METHYL 6-QUINOLINEACETATE Basic information
- Product Name:
- METHYL 6-QUINOLINEACETATE
- Synonyms:
-
- METHYL 6-QUINOLINEACETATE
- Quinolin-6-Yl-Acetic Acid Methyl Ester
- Methyl 6-quinolineacetate ,95%
- Methyl 2-quinolin-6-ylacetate
- 6-Quinolineacetic acid methyl ester
- Methyl 2-(quinolin-6-yl)
- methyl quinolin-6-ylacetate
- CAS:
- 5622-36-6
- MF:
- C12H11NO2
- MW:
- 201.22
- Product Categories:
-
- pharmacetical
- Heterocycles
- Acids and Derivatives
- Mol File:
- 5622-36-6.mol
METHYL 6-QUINOLINEACETATE Chemical Properties
- Boiling point:
- 196-200 °C(Press: 13 Torr)
- Density
- 1.186±0.06 g/cm3(Predicted)
- storage temp.
- Sealed in dry,Room Temperature
- pka
- 4.82±0.10(Predicted)
- Appearance
- Light yellow to brown Liquid
- CAS DataBase Reference
- 5622-36-6
METHYL 6-QUINOLINEACETATE Usage And Synthesis
Uses
Methyl 2-(Quinolin-6-yl)acetate is a reactuant to prepare triazolopyridazines as tyrosine kinase modulators.
Synthesis
67-56-1
5622-34-4
5622-36-6
Example 1. Preparation of methyl quinoline-6-acetate: Concentrated sulfuric acid (206 mL, 3.868 mol) was slowly added dropwise to a solution of 6-quinolineacetic acid (Compound 1001, 658.2 g, 3.516 mol, Okeanos Tech Co., Catalog No. OK-J-05024) dissolved in 6.5 L of methanol as shown in step i of Scheme 1. A slight exotherm was observed during the dropwise addition. After dropwise addition, the reaction mixture was stirred under reflux conditions for 4 hours. After completion of the reaction, it was cooled to room temperature and the volatile solvent was removed by distillation under reduced pressure. The residue was diluted with 4 L of ethyl acetate and cooled in an ice bath. Subsequently, the pH was adjusted to 4 with 2 N NaOH solution (2.1 L, 1.2 eq.) and then with saturated sodium bicarbonate solution to 8. The organic and aqueous layers were separated and the aqueous layer was extracted twice with ethyl acetate. The combined organic phases were washed sequentially with saturated sodium bicarbonate solution, water and brine, and then dried with anhydrous MgSO4. After filtration, the solvent was evaporated under reduced pressure to give methyl quinoline-6-acetate (compound 1002, 696.8 g, 98% yield) as a clear brown oil: ESMS (M + 1), 202.14; 1H NMR (300.0 MHz, DMSO-d6) δ 8.90 (1H, dd, J = 1.7, 4.2 Hz), 8.14-8.10 (1H , m), 8.08 (1H, d, J = 8.7 Hz), 7.72 (1H, d, J = 1.4 Hz), 7.65 (1H, dd, J = 2.0, 8.7 Hz), 7.40 (1H, dd, J = 4.2, 8.3 Hz), 3.83 (2H, s), 3.73 (3H, s).
References
[1] Patent: WO2010/59668, 2010, A1. Location in patent: Page/Page column 20-21
[2] Patent: WO2016/8011, 2016, A1. Location in patent: Page/Page column 67
[3] Patent: WO2013/19682, 2013, A1. Location in patent: Page/Page column 117
[4] Patent: WO2008/144767, 2008, A1. Location in patent: Page/Page column 110; 115
[5] Journal of Medicinal Chemistry, 2013, vol. 56, # 17, p. 6651 - 6665
METHYL 6-QUINOLINEACETATE Preparation Products And Raw materials
Raw materials
METHYL 6-QUINOLINEACETATESupplier
- Tel
- 0512-68323967 18015559028
- sales@iticmedchem.com
- Tel
- 010-010-82967028 13522913783
- 2355560935@qq.com
- Tel
- +86-21-68182121
- Tel
- 0086-21-58956006
- Tel
- 18049974220
- 3060526242@qq.com
METHYL 6-QUINOLINEACETATE(5622-36-6)Related Product Information
- quinoline-6-carbonitrile
- Quinaldic acid
- 4-Quinolinecarboxaldehyde
- QUINOLINE-6-CARBOXYLIC ACID ETHYL ESTER
- Methyl 7-quinolinecarboxylate
- METHYL 2-OXO-2-(QUINOLIN-6-YL)ACETATE
- ethyl2,2-difluoro-2-(quinolin-6-yl)acetate
- ETHYL 2-(QUINOLIN-6-YL)ACETATE
- RARECHEM AK ML 0112
- METHYL 6-QUINOLINEACETATE
- (quinolin-7-yl)MethanaMine hydrochloride
- 4-CYANOQUINOLINE
- 5-HYDROXYMETHYLQUINOLINE
- 6-Quinolinecarboxylic acid
- RARECHEM AL BF 0184
- QUINAZOLIN-4-YLAMINE
- 3-QUINOLINEBORONIC ACID HYDROCHLORIDE
- 8-Quinolineboronic acid