Basic information Safety Supplier Related
ChemicalBook >  Product Catalog >  Inorganic chemistry >  Inorganic salts >  Silicide and silicates >  BARIUM SILICATE

BARIUM SILICATE

Basic information Safety Supplier Related

BARIUM SILICATE Basic information

Product Name:
BARIUM SILICATE
Synonyms:
  • silicicacid(h2sio3),bariumsalt(1:1)
  • BARIUM SILICON OXIDE
  • BARIUM SILICATE
  • BARIUM METASILICATE
  • Silicicacid,bariumsalt(1:1)
  • Metasilicic acid barium salt
  • BARIUM SILICATE ISO 9001:2015 REACH
  • Barium m-silicate
CAS:
13255-26-0
MF:
BaH4O3Si
MW:
217.44
EINECS:
236-245-7
Product Categories:
  • Metals
Mol File:
13255-26-0.mol
More
Less

BARIUM SILICATE Chemical Properties

Melting point:
1604°C
Density 
1,67 g/cm3
refractive index 
1.67
solubility 
insoluble in H2O; soluble in acid solutions
form 
Powder
color 
White
Water Solubility 
Insoluble in water. Soluble in acids.
CAS DataBase Reference
13255-26-0(CAS DataBase Reference)
EPA Substance Registry System
Silicic acid (H2SiO3), barium salt (1:1) (13255-26-0)
More
Less

Safety Information

Hazard Codes 
Xn
Risk Statements 
20/22
Safety Statements 
28
RIDADR 
UN1564
WGK Germany 
1
TSCA 
Yes
HazardClass 
6.1
PackingGroup 
III

MSDS

More
Less

BARIUM SILICATE Usage And Synthesis

Description

BaSiO3 is orthorhombic with unit-cell dimensions of a = 5.6182(5)?, b = 12.445(1), c = 4.5816 ?. It is dimorphic with α-BaSiO3 stable below about 990°C but forms β-BaSiO3 above 1000°C. A 1:1 mol ratio of BaO–SiO2 fired at 850°C and 1050°C serves to form the two dimorphs.
The enthalpy of solution of BaSiO3 in (3.15 mol/dm3 HF + 8.13 mol/dm3 HCl) has been measured. From the results, the standard molar enthalpy of formation of BaSiO3 (s) was calculated. The value obtained was -1606.4±2.6 kJ/mol.

Chemical Properties

Colorless powder. Insoluble in water; soluble in acids.

Uses

Barium silicate films that are suitable for use as transmission media in integrated optical circuits. It is shown that the films, which can be produced with a wide range of refractive indices by suitable selection of the ratio of the target constituents, exhibit low optical attenuation. Hence it is used for integrated optical circuits. It is used in ceramics.

Preparation

Bariumsilicate can be prepared by calcining the oxide with silica, SiO2, at an elevated temperature: BaO + SiO2 + hea?BaSiO3

BARIUM SILICATESupplier

Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
4006608290; 18621169109
Email
market03@meryer.com
3B Pharmachem (Wuhan) International Co.,Ltd.
Tel
821-50328103-801 18930552037
Email
3bsc@sina.com
Alfa Aesar
Tel
400-6106006
Email
saleschina@alfa-asia.com
JinJin Le Chemical Co., Ltd
Tel
10106090
Email
jjlchem2@163.com
Dayang Chem (Hangzhou) Co.,Ltd.
Tel
571-88938639 +8617705817739
Email
info@dycnchem.com