PYRIDINE, 2,6-DIFLUORO-4-IODO- Chemical Properties

Melting point:

80-82 °C(Solv: ligroine (8032-32-4))

Boiling point:

222.0±35.0 °C(Predicted)

Density 

2.129±0.06 g/cm3(Predicted)

storage temp. 

under inert gas (nitrogen or Argon) at 2–8 °C

pka

-7.48±0.10(Predicted)

Appearance

Off-white to light yellow Solid

InChI

InChI=1S/C5H2F2IN/c6-4-1-3(8)2-5(7)9-4/h1-2H

InChIKey

AXPNCSVJCFXRBC-UHFFFAOYSA-N

SMILES

C1(F)=NC(F)=CC(I)=C1

Safety Information

HS Code 

2933399990

PYRIDINE, 2,6-DIFLUORO-4-IODO- Usage And Synthesis

Application

2,6-Difluoro-4-iodopyridine can be used as a pharmaceutical synthesis intermediate. It can be prepared by reacting 2,6-difluoropyridine with n-butyllithium and iodine to generate intermediate 3-iodo-2,6-difluoropyridine. Further reaction yields 2,6-difluoro-4-iodopyridine, which can be used in laboratory research and development and chemical production processes.

Synthesis

The general procedure for the synthesis of 2,6-difluoro-4-iodopyridine from 2,6-difluoro-3-iodopyridine was as follows: n-butyllithium (1.66 mL, 4.15 mmol, 2.5 mol/L hexane solution) was slowly added dropwise to a solution of tetrahydrofuran (THF, 2 mL) with diisopropylamine (1.30 mL, 4.15 mmol) at -78 °C. 25 minutes later, a solution of 2,6-difluoro-3-iodopyridine (1.00 g, 4.15 mmol) in THF (5 mL) was added dropwise to the above mixture via cannula. The reaction mixture was kept at -78 °C for 12 h. THF (2 mL) solution in water (0.2 mL, 11 mmol) was subsequently added and slowly warmed up to room temperature over a period of 1 h. The reaction was carried out at -78 °C for 1 h. The reaction was carried out in a controlled manner. Upon completion of the reaction, the reaction mixture was washed with 10% aqueous Na2SO3 solution (5 mL) and extracted with ethyl acetate (3 x 50 mL). The organic phases were combined and dried over anhydrous magnesium sulfate (MgSO4) and subsequently concentrated under reduced pressure. The target product 2,6-difluoro-4-iodopyridine was obtained by hexane crystallization as colorless crystals (740 mg, 74% yield). The product was characterized as follows: 1H NMR (400 MHz, CDCl3): δ 7.22 (t, 2H, J = 1.2 Hz); 13C NMR (100 MHz, CDCl3): δ 161.1 (dd, J = 250, 16 Hz, 2C), 115.6 (dd, J = 24, 10 Hz, 2C), 110.3; 19F NMR (376 MHz, CDCl3): δ -68.1; GC-MS m/z: Calculated value 241 [M+], measured value 241; Melting point: 78-80 °C.

References

[1] Angewandte Chemie - International Edition, 2017, vol. 56, # 18, p. 5026 - 5030
[2] Angew. Chem., 2017, vol. 129, p. 5108 - 5112,5
[3] Chinese Chemical Letters, 2017, vol. 28, # 3, p. 525 - 530
[4] Organic Letters, 2007, vol. 9, # 25, p. 5175 - 5178

PYRIDINE, 2,6-DIFLUORO-4-IODO-(685517-71-9)Related Product Information

• Propidium iodide
• Pyridine, 2-chloro-5-iodo-4-methyl-
• PYRIDINE-4-BORONIC ACID PROPANEDIOL-1,3 CYCLIC ESTER
• Pyridine, 3-(methylthio)- (6CI,8CI,9CI)
• Pyridine, 5-bromo-2-ethoxy-4-methyl- (9CI)
• Pyridine, 2-fluoro-3-(methylthio)- (9CI)
• PYRIDINE IODINE MONOCHLORIDE COMPLEX
• Pyridine, 3-bromo-2-chloro-6-(methylthio)-
• PYRIDINE-3-BORONIC ACID 1,3-PROPANEDIOL CYCLIC ESTER
• PYRIDINE, 2-CHLORO-5-(PHENYLMETHOXY)-
• Pyridine, 2-fluoro-3,5-dimethyl- (9CI)
• Pyridine 2-fluoro-6-methyl- 5-methanol
• Pyridine,2-(1-methylethoxy)-
• Pyridine, 5-bromo-2-ethoxy-3-methyl- (9CI)
• Pyridine, 2-bromo-5-(bromomethyl)- (9CI)
• 2,5-Dichloro-4-iodopyridine
• Pyridine, 2-fluoro-3-methoxy- (9CI)
• Pyridine, 2,3-dichloro-4-methyl- (9CI)