Basic information Safety Supplier Related
ChemicalBook >  Product Catalog >  Pharmaceutical intermediates >  Heterocyclic compound >  Pyridazine compounds >  5-Iodo-2,3-dihydropyridazin-3-one

5-Iodo-2,3-dihydropyridazin-3-one

Basic information Safety Supplier Related

5-Iodo-2,3-dihydropyridazin-3-one Basic information

Product Name:
5-Iodo-2,3-dihydropyridazin-3-one
Synonyms:
  • 5-Iodo-2,3-dihydropyridazin-3-one
  • 5-Iodopyridazin-3(2H)-one
  • 5-Iodo-2H-pyridazin-3-one
  • 3(2H)-Pyridazinone, 5-iodo-
  • 5-Iodo-3(2H)-pyridazinone
  • 5-Iodo-2,3-dihydropyridazin-3-on
  • 5-Iodo-2,3-dihydropyridazin-3-one ISO 9001:2015 REACH
  • 5-Iodo-3(2H)-pyridazinone, 95+%
CAS:
825633-94-1
MF:
C4H3IN2O
MW:
221.98
EINECS:
1533716-785-6
Mol File:
825633-94-1.mol
More
Less

5-Iodo-2,3-dihydropyridazin-3-one Chemical Properties

Melting point:
147-148 ºC
Density 
2.40
storage temp. 
Keep in dark place,Sealed in dry,Room Temperature
form 
solid
pka
10.27±0.40(Predicted)
Appearance
Light yellow to green yellow Solid
InChI
InChI=1S/C4H3IN2O/c5-3-1-4(8)7-6-2-3/h1-2H,(H,7,8)
InChIKey
UZWMMCWOUBWROK-UHFFFAOYSA-N
SMILES
C1(=O)NN=CC(I)=C1
More
Less

5-Iodo-2,3-dihydropyridazin-3-one Usage And Synthesis

Synthesis

932-22-9

825633-94-1

General procedure for the synthesis of 5-iodopyridazin-3(2H)-one from 4,5-dichloropyridazin-3(2H)-one: In a sealed tube, 4,5-dichloropyridazin-3(2H)-one (10 g, 60.61 mmol) was mixed with 47% hydriodic acid (75 mL), and the reaction mixture was heated at 150 °C for 25 hours. Upon completion of the reaction, the mixture was filtered and the solid was washed with deionized water (100 mL). Subsequently, the solids were suspended in deionized water (200 mL), heated to 50 °C and sodium thiosulfate was slowly added with stirring until the solution took on a light brown color and precipitate formation was observed. The resulting mixture was filtered and the filtrate was dried under vacuum. The brown solid obtained was washed with ethanol (200 mL) preheated to about 78 °C and filtered again. The red to brown filtrate was dried under vacuum. Finally, the dark brown solid obtained was ground with dichloromethane (20 mL) followed by hexane (4 x 30 mL) and dried under vacuum to give 5-iodo-2H-pyridazin-3-one (8.640 g, 64% yield) as a brown solid. The product could be used in the subsequent reaction without further purification.

References

[1] Patent: US2009/264434, 2009, A1. Location in patent: Page/Page column 29; 47
[2] Bioorganic and Medicinal Chemistry, 2012, vol. 20, # 12, p. 3880 - 3886
[3] Patent: WO2009/142732, 2009, A2. Location in patent: Page/Page column 65-66
[4] Patent: WO2009/152325, 2009, A1. Location in patent: Page/Page column 208-209
[5] Patent: US2008/27041, 2008, A1. Location in patent: Page/Page column 78

5-Iodo-2,3-dihydropyridazin-3-oneSupplier

Shanghai XunTang Chemical Technology Co., Ltd. Gold
Tel
15900811974
Email
546264981@qq.com
Shanghai Zhen Li Biological Technology Co., Ltd Gold
Tel
021-16621358918; 18516310516
Email
zhenlipharma888@163.com
SiChuang NanBu Honesty Technology Co., Ltd.
Tel
0838-5675166 15883665058
Email
nbcxkj@126.com
JinYan Chemicals(ShangHai) Co.,Ltd.
Tel
13817811078
Email
sales@jingyan-chemical.com
China DongFan Chemical Co.,LTD
Tel
86-0571-85151182
More
Less

5-Iodo-2,3-dihydropyridazin-3-one(825633-94-1)Related Product Information