4-IODO-3-NITROPHENOL
4-IODO-3-NITROPHENOL Basic information
- Product Name:
- 4-IODO-3-NITROPHENOL
- Synonyms:
-
- 3-Iodo-4-nitrophenol.
- 4-IODO-3-NITROPHENOL 97%
- Phenol, 3-iodo-4-nitro-
- CAS:
- 50590-07-3
- MF:
- C6H4INO3
- MW:
- 265.01
- Product Categories:
-
- Aromatic Phenols
- Mol File:
- 50590-07-3.mol
4-IODO-3-NITROPHENOL Chemical Properties
- Melting point:
- 153-159 °C
- Boiling point:
- 382.5±37.0 °C(Predicted)
- Density
- 2.176
- storage temp.
- 2-8°C(protect from light)
- pka
- 6.39±0.10(Predicted)
- Appearance
- Light yellow to yellow Solid
Safety Information
- Hazard Codes
- Xn
- Risk Statements
- 36/37/38-20/21/22
- Safety Statements
- 36/37/39-26
- HS Code
- 2908990000
MSDS
- Language:English Provider:ACROS
4-IODO-3-NITROPHENOL Usage And Synthesis
Synthesis
626-02-8
27783-55-7
50590-07-3
General procedure for the synthesis of 5-iodo-2-nitrophenol and 3-iodo-4-nitrophenol from 3-iodophenol: 3.0 mL of fuming nitric acid (75 mmol) in 12 mL of glacial acetic acid was slowly added dropwise to 15.03 g (68.3 mmol) of 3-iodophenol dissolved in 60 mL of glacial acetic acid over a 25-minute period and the reaction flask was placed in an ice bath to cool. After the dropwise addition was completed, the reaction mixture was continued to be stirred at room temperature for 30 min. Subsequently, the reaction solution was poured into ice water and concentrated under vacuum to remove most of the solvent. The residue was dissolved in 150 mL of water and then extracted with dichloromethane (2 x 300 mL). The organic phases were combined, dried with anhydrous magnesium sulfate, and the solvent was evaporated under reduced pressure to give 17 g of crude product. Separation by silica gel medium-pressure chromatography (eluent ratio 1:2 ethyl acetate:hexane) afforded 3-iodo-4-nitrophenol (6.93 g, 26.1 mmol, 38% yield), melting point 121-123 °C; 1H NMR (CDCl3, 300 MHz) δ 7.98 (d, 1H, J = 9 Hz), 7.54 (d, 1H, J = 3 Hz) 6.92 (dd, 1H, J = 9, 3 Hz), 5.54 (bs, 1H); IR (KBr) 3150 (wide), 1600, 1580, 1512, 1404, 1336, 1298, 1212, 1121, 1023, 870 cm?1; and 3-iodo-6-nitrophenol (3.07 g, 11.6 mmol, yield 17%), melting point 92-94 °C after recrystallization from dichloromethane/hexane (literature value 96 °C; Hodgson, H.H. et al., 1927); 1H NMR (CDCl3, 300 MHz) δ 10.53 (s, 1H), 7.76 (d, 1H, J = 9.0 Hz), 7.59 (d, 1H, J = 2.0 Hz), 7.33 ( dd, 1H, J = 9.0, 2.0 Hz); 13C NMR (CDCl3; assisted attribution by HMQC) δ 105.2 (C-3), 125.6 (C-5), 129.2 (C-2), 129.7 (C-4), 133.4 (C-6), 154.6 (C-1); IR (KBr) 3430 (broad), 1604, 1671, 1518, 1463 1571, 1518, 1463, 1317, 1225, 1172, 1055, 888 cm?1; Calculated elemental analysis (C6H4INO3): C, 27.19; H, 1.52; N, 5.29. Measured values: C, 27.36; H, 1.57; N, 5.15.
References
[1] Tetrahedron, 2010, vol. 66, # 47, p. 9252 - 9262
[2] Bioorganic and Medicinal Chemistry, 2005, vol. 13, # 16, p. 4960 - 4971
[3] Patent: WO2005/95347, 2005, A1. Location in patent: Page/Page column 41
[4] Journal of the Chemical Society, 1927, p. 634
[5] Journal of the Chemical Society, 1925, vol. 127, p. 1602
4-IODO-3-NITROPHENOLSupplier
- Tel
- 021-54306202 13764082696
- info@hanhongsci.com
- Tel
- 021-50135380
- shchemsky@sina.com
- Tel
- 86(512)5235 8471 17715136450
- sales@shiyabiopharm.com
- Tel
- 400-164-7117 13681763483
- product02@bidepharm.com
- Tel
- 0519-85252752 15366845260
- taihuaren@vip.163.com