Bolasterone Chemical Properties

Melting point:

163-165°

Boiling point:

441.0±45.0 °C(Predicted)

Density 

1.09±0.1 g/cm3(Predicted)

solubility 

Chloroform (Slightly), Dioxane (Slightly), Methanol (Slightly)

form 

Solid

pka

15.13±0.70(Predicted)

color 

Off-White to Pale Yellow

Safety Information

DEA Controlled Substances

CSCN: 4000
CSA SCH: Schedule III
NARC: No

Bolasterone Usage And Synthesis

Originator

Myagen,Upjohn

Uses

Synthetic anabolic; epimeric with Calusterone (C148900). Controlled substance (anabolic steroid).

Definition

ChEBI: Bolasterone is a 3-hydroxy steroid. It has a role as an androgen.

Manufacturing Process

A mixture of 0.4 g of cuprous chloride, 20 ml of 4 M methylmagnesium bromide in ether and 60 ml of redistilled tetrahydrofuran was stirred and cooled in an ice bath during the addition of a mixture of 2.0 g of 6-dehydro- 17-methyltestosterone, 60 ml of redistilled tetrahydrofuran and 0.2 g of cuprous chloride. The ice bath was removed and stirring was continued for 4 h. Ice and water were than carefully added, the solution acidified with 3 N hydrochloric acid and extracted several times with ether. The combined ether extracts were washed with a brine-sodium carbonate solution, brine and then g column of magnesium silicate (Florisil) packed wet with hexanes (Skellysolve B). The column was eluted with 250 ml of hexanes, 0.5 liter of 2% acetone, two liters of 4% acetone and 3.5 L of 6% acetone in hexanes.
The residues from fractions 8 to 16 were combined and rechromatographed over a 125.0 g column of magnesium silicate. The column was eluted with 6% acetone in hexanes. Fractions 18 to 29 were combined and dissolved in acetone, decolorized with charcoal, and recrystallized from acetone. 1.0 g of a crystalline mixture of the 7-epimers of 7,17-dimethyltestosterone was obtained melting at 120° to 140°C. The 7α-isomer are separated according to following procedure:
To obtain the 7(α)-isomer of 7,17-dimethyltestosterone the crystalline mixture of the 7 stereoisomers of 7,17-dimethyltestosterone was refluxed in tertiary butyl alcohol with recrystallized chloranil under nitrogen. The reaction mixture was concentrated under a fast stream of nitrogen, diluted with methylene chloride and the solution washed with dilute sodium hydroxide, water and then dried, filtered and the solvent removed. The residue, was combined with the product from an identical run and chromatographed through a magnesium silicate column developed with solvent of the following composition and order:
two each of hexane hydrocarbons (Skellysolve B), hexanes plus 4% acetone, hexanes plus 8% acetone, hexanes plus 12% acetone, hexanes plus 14% acetone, hexanes plus 16% acetone, hexanes plus 18% acetone, hexanes plus 20% acetone, hexanes plus 24% acetone, hexanes plus 28% acetone, and two of acetone.
The residues, eluted with mixture: water-acetone, were combined and chromatographed through a 50 g 1:1 charcoal (Darco)-diatomaceous earth (Celite) column. The column was developed with solvent of the following composition and order: methanol, a 1:1 mixture of methanol and acetone, a 1:2 mixture of methanol and acetone, acetone and a 1:4 mixture of acetone and methylene chloride. Fractions, containing 7(α)-epimer were combined, the solvent evaporated and the residue crystallized from acetone to give the 7α,17-dimethyltestosterone, melting point at 163° to 165°C.

Therapeutic Function

Anabolic

Bolasterone(1605-89-6)Related Product Information

• Testosterone
• Dicirenone
• (7A,17A)-17-HYDROXY-3-OXO-7-PROPYLPREGN-4-ENE-21-CARBOXYLIC ACID, POTASSIUM SALT
• Bolasterone
• (17R)-17-Hydroxy-3-oxopregn-4-ene-7α,21-dicarboxylic acid 7-methyl ester
• RU 26752