4,4'-DIFORMYLTRIPHENYLAMINE
4,4'-DIFORMYLTRIPHENYLAMINE Basic information
- Product Name:
- 4,4'-DIFORMYLTRIPHENYLAMINE
- Synonyms:
-
- BIS(4-FORMYLPHENYL)PHENYLAMINE
- N,N-BIS(4-FORMYLPHENYL)ANILINE
- SPECS AK-249/40652631
- 4,4'-(PHENYLIMINO)DIBENZALDEHYDE
- 4,4μ-(Phenylimino)bisbenzaldehyde, Bis(4-formylphenyl)aniline, Bis(4-formylphenyl)phenylamine
- 4,4′-Diformyltriphenylamine,4,4′-(Phenylimino)bisbenzaldehyde, Bis(4-formylphenyl)aniline, Bis(4-formylphenyl)phenylamine
- N,N-Bis(4-formylphenyl)aniline 4,4'-Diformyltriphenylamine 4,4'-(Phenylimino)dibenzaldehyde
- Bis(4-forMylphenyl)phenylaMine (purified by subliMation)
- CAS:
- 53566-95-3
- MF:
- C20H15NO2
- MW:
- 301.34
- Mol File:
- 53566-95-3.mol
4,4'-DIFORMYLTRIPHENYLAMINE Chemical Properties
- Melting point:
- 142-146 °C
- Boiling point:
- 497.3±30.0 °C(Predicted)
- Density
- 1.235±0.06 g/cm3(Predicted)
- storage temp.
- under inert gas (nitrogen or Argon) at 2-8°C
- solubility
- soluble in Toluene
- form
- powder to crystal
- pka
- -8.19±0.50(Predicted)
- color
- White to Light yellow to Green
- InChI
- InChI=1S/C20H15NO2/c22-14-16-6-10-19(11-7-16)21(18-4-2-1-3-5-18)20-12-8-17(15-23)9-13-20/h1-15H
- InChIKey
- DOUAFMIJGIUWJX-UHFFFAOYSA-N
- SMILES
- N(C1=CC=C(C=C1)C=O)(C1=CC=C(C=C1)C=O)C1=CC=CC=C1
4,4'-DIFORMYLTRIPHENYLAMINE Usage And Synthesis
Synthesis
603-34-9
68-12-2
53566-95-3
The general procedure for the synthesis of N,N-bis(4-formylphenyl)aniline from triphenylamine and N,N-dimethylformamide was as follows: a solution of POCl3 (56.0 mL, 0.53 mol) was added slowly and dropwise to a stirred solution of anhydrous DMF (38.0 mL, 0.5 mol) of triphenylamine (12.3 g, 0.05 mol) under ice-bath conditions. Subsequently, the reaction mixture was heated to 95 °C and stirred continuously for 5 hours. Upon completion of the reaction, the resulting solution was poured into water and neutralized with 20% NaOH solution to pH 8. The product was extracted with ethyl acetate (3 x 200 mL), the organic phase was washed with water, dried over anhydrous MgSO4, and concentrated under reduced pressure to remove the solvent. The crude product was purified by silica gel column chromatography using ethyl acetate/cyclohexane (1:5, v/v) as eluent to afford the target product N,N-bis(4-formylphenyl)aniline (yellow solid, 11.45 g, 76% yield, melting point 120-123 °C). The product was confirmed by IR (KBr, cm-1): 3044, 3038, 2816, 2745, 1691, 1601, 1584, 1508, 1336, 828, 772, 758; 1H NMR (400 MHz, CDCl3, δ ppm): 9.90 (s, 2H, CHO), 7.7-7.8 (m, 6H). 7.3-7.4 (m, 3H), 7.1-7.3 (m, 4H); 13C NMR (101 MHz, CDCl3, δ ppm): 191.05, 151.72, 145.56, 131.70, 130.58, 130.21, 129.34, 126.48, 125.62; EI-MS (m/z): 302.1131 [M+H]+ (calculated value C20H15NO2: 301.1121).
References
[1] New Journal of Chemistry, 2016, vol. 40, # 10, p. 8837 - 8845
[2] Molecular Crystals and Liquid Crystals, 2010, vol. 532, p. 55 - 64
[3] New Journal of Chemistry, 2017, vol. 41, # 16, p. 7908 - 7914
[4] Dyes and Pigments, 2016, vol. 133, p. 363 - 371
[5] Physical Chemistry Chemical Physics, 2016, vol. 18, # 40, p. 28052 - 28060
4,4'-DIFORMYLTRIPHENYLAMINE Preparation Products And Raw materials
Raw materials
4,4'-DIFORMYLTRIPHENYLAMINESupplier
- Tel
- 021-021-54382182 18601603956
- 18601603956@163.com
- Tel
- 0371-53765687 18937137882
- 2853979813@qq.com
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 4006356688 18621169109
- market03@meryer.com
- Tel
- 010-88425576
- sales@dhltchem.com