BENZO(B)FLUORANTHENE Chemical Properties

Melting point:

163-165 °C(lit.)

Boiling point:

481°C(lit.)

Density 

1.1549 (estimate)

vapor pressure 

5 x 10^-7 mmHg at 20 °C (U.S. EPA, 1982)

refractive index 

1.8390 (estimate)

Flash point:

-18 °C

storage temp. 

2-8°C

solubility 

Soluble in most solvents (U.S. EPA, 1985)

pka

>15 (Christensen et al., 1975)

color 

White to Yellow to Green

Water Solubility 

1.2 μg/L at 25 °C (U.S. EPA, 1980a)

BRN 

1872553

Henry's Law Constant

2.47, 5.03, 11.74, 14.90, 20.53, and 36.52 at 10.0, 20.0, 35.0, 40.1, 45.0, and 55.0 °C, respectively (wetted-wall column, ten Hulscher et al., 1992)

Stability:

Stable. Incompatible with strong oxidizing agents.

CAS DataBase Reference

205-99-2(CAS DataBase Reference)

IARC

2B (Vol. 92) 2010

EPA Substance Registry System

Benzo[b]fluoranthene (205-99-2)

Safety Information

Hazard Codes 

T,N,Xn,F,Xi

Risk Statements 

45-50/53-67-65-38-11-36-39/23/24/25-23/24/25-66-52/53-20

Safety Statements 

53-45-60-61-62-26-16-9-36/37-7-33-25

RIDADR 

UN 2811 6.1/PG 3

WGK Germany 

3

RTECS 

CU1400000

HS Code 

2902.90.9000

HazardClass 

6.1(b)

PackingGroup 

III

Hazardous Substances Data

205-99-2(Hazardous Substances Data)

Toxicity

LC₅₀ (21-d) for Folsomia fimetaria >3,600 mg/kg (Sverdrup et al., 2002).

MSDS

• Language:English Provider:SigmaAldrich

BENZO(B)FLUORANTHENE Usage And Synthesis

Description

: Benzo(b)fluoranthene is a colorless, needleshaped solid. Molecular weight= 252.32; Boilingpoint = 480℃; Freezing/Melting point= 168℃; Vaporpressure = 5.0 3 10 2 7 mmHg. Hazard Identification (basedon NFPA-704 M Rating System): Health 3, Flammability 1,Reactivity 0. Practically insoluble in water; solubility =1 mg/mL at 19℃.

Chemical Properties

off-white to tan powder

Chemical Properties

Benzo(b)fluoranthene is a colorless, needleshaped solid.

Physical properties

Colorless to pale yellow to yellow-orange needles or crystals from benzene, toluene, ethylbenzene or acetic acid.

Uses

Benz[e]acephenanthrylene is a polycyclic aromatic hydrocarbon that was detected in significant levels in airborne polluants, auto exhaust and tobacco and marijuana smoke.

Definition

ChEBI: An ortho- and peri-fused polycyclic arene that consists of a benzene ring fused with a acephenanthrylene ring.

Synthesis Reference(s)

Tetrahedron Letters, 36, p. 2403, 1995 DOI: 10.1016/0040-4039(95)00314-3

General Description

Needles or yellow fluffy powder.

Air & Water Reactions

Insoluble in water.

Reactivity Profile

BENZO(B)FLUORANTHENE can react with strong oxidizing agents. May react with electrophiles, peroxides, nitrogen oxides and sulfur oxides

Hazard

Confirmed carcinogen.

Health Hazard

Acute oral toxicity data are not available.There is sufficient evidence on the carcinogenicity of this compound in animals. Itproduced tumors at the site of application.Cancers in lungs and skin have been observedin animals.

Health Hazard

ACUTE/CHRONIC HAZARDS: When heated to decomposition, BENZO(B)FLUORANTHENE emits acrid smoke and irritating fumes.

Fire Hazard

Flash point data for BENZO(B)FLUORANTHENE are not available; however, BENZO(B)FLUORANTHENE is probably combustible.

Safety Profile

Confirmed carcinogen with experimental carcinogenic and tumorigenic data. Mutation data reported. When heated to decomposition it emits acrid smoke and irritating fumes.

Potential Exposure

There is no commercial production of this compound. Benzo(b)fluoranthene is a chemical substance formed during the incomplete burning of fossil fuel, garbage, in cigarette smoke, or any organic matter and is Benzofluoranthene 399 found in smoke in general; it is carried into the air, where it condenses onto dust particles and is distributed into water and soil and on crops. B(b)F is a PAH and a component of coal tar pitch used in industry as a binder for electrodes. It is also a component of creosote, which is used to preserve wood. PAHs are also found in limited a mounts in bituminous materials and asphalt used for paving, roofing, and insulation. B(b)F has some use as a research chemical. It is available from some specialty chemical firms in low quantities (25 100 mg).

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, rinsemouth and get medical attention.

Carcinogenicity

Benzo[b]fluoranthenewas tested for carcinogenicity by dermal application in mice in multiple studies, intraperitoneal injection into mice in multiple studies, and intrapulmonary implantation into rats in one study. In all of these studies, benzo[b]-fluoranthene exhibited a significant carcinogenic activity.

Source

Benzo[b]fluoranthene and benzo[k]fluoranthene were detected in 8 diesel fuels at concentrations ranging from 0.0027 to 3.1 mg/L with a mean value of 0.266 mg/L (Westerholm and Li, 1994). Also present in low octane gasoline (0.16–0.49 mg/kg), high octane gasoline (0.26– 1.34 mg/kg), used motor oil (2.8–141.0 mg/kg), and bitumen (40 to 1,600 ppb), cigarette smoke (3 g/1,000 cigarettes), and gasoline exhaust (19 to 48 g/L) (quoted, Verschueren, 1983). Also detected in asphalt fumes at an average concentration of 22.04 ng/m³ (Wang et al., 2001). Nine commercially available creosote samples contained benzo[b]fluoranthene at concentrations ranging from 2 to 96 mg/kg (Kohler et al., 2000).
Schauer et al. (2001) measured organic compound emission rates for volatile organic compounds, gas-phase semi-volatile organic compounds, and particle phase organic compounds from the residential (fireplace) combustion of pine, oak, and eucalyptus. The particle-phase emission rates of benzo[b]fluoranthene were 0.790 mg/kg of pine burned, 0.400 mg/kg of oak burned, and 0.327 mg/kg of eucalyptus burned.
Particle-phase tailpipe emission rate from a noncatalyst-equipped gasoline-powered automobile was 37.3 μg/km (Schauer et al., 2002).

Environmental Fate

Biological. Ye et al. (1996) investigated the ability of Sphingomonas paucimobilis strain U.S. EPA 505 (a soil bacterium capable of using fluoranthene as a sole source of carbon and energy) to degrade 4, 5, and 6-ringed aromatic hydrocarbons (10 ppm). After 16 h of incubation using a resting cell suspension, only 12.5% of benzo[b]fluoranthene had degraded. It was suggested that degradation occurred via ring cleavage resulting in the formation of polar metabolites and carbon dioxide.
Soil. The reported half-lives for benzo[b]fluoranthene in a Kidman sandy loam and McLaurin sandy loam are 294 and 211 d, respectively (Park et al., 1990).
Photolytic. The atmospheric half-life was estimated to range from 1.43 to 14.3 h (Atkinson, 1987).
Chemical/Physical. Benzo[b]fluoranthene will not hydrolyze because it has no hydrolyzable functional group (Kollig, 1993).

storage

Color Code—Blue: Health Hazard/Poison: Storein a secure poison location. Store in a cool, dry place. Aregulated, marked area should be established where thischemical is handled, used, or stored in compliance withOSHA Standard 1910.1045.

Shipping

UN2811 Toxic solids, organic, n.o.s., Hazard Class: 6.1; Labels: 6.1—Poisonous materials, Technical Name Required.

Incompatibilities

Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides.

Waste Disposal

Residues and sorbent media may be packaged in 17H epoxy-lined drums and disposed of at an EPA-approved site. Destroy by permanganate oxidation, high-temperature incineration with scrubbing equipment, or microwave plasma treatment, if available. Confirm disposal procedures with responsible environmental engineer and regulatory officials.

BENZO(B)FLUORANTHENE(205-99-2)Related Product Information

• BENZO(B)FLUORANTHENE
• INDENO(1,2,3-C,D)PYRENE (D12)
• INDENO(1,2,3-C,D)PYRENE
• 7,10-Diaza-8,9-benzofluoranthene
• Benzo[k]fluoranthene
• BENZO(J)FLUORANTHENE,benzo(l)fluoranthen
• Fluoranthene
• NAPHTHO[2,3-B]FLUORANTHENE
• DIBENZO(A,E)FLUORANTHENE
• DIBENZO(B,K)FLUORANTHENE
• naphtho(1,2-b)fluoranthene
• BENZO(B)FLUORANTHENE D12
• N-METHYLFULLEROPYRROLIDINE
• 56549, Benzo[a]fluoranthene (purity),BENZO(A)FLUORANTHENE,1,2-benzofluoranthen
• 2,13-benzofluoranthen
• BENZO(K)FLUORANTHENE D12
• BENZO(K)FLUORANTHENE (13C6)
• 2-PHENYLBENZO[B]FLUORANTHENE