TALL OIL Chemical Properties

Boiling point:

360.85℃[at 101 325 Pa]

Density 

0.95-1.0 g/cm3

vapor pressure 

0.004Pa at 25℃

Water Solubility 

42.2mg/L at 20℃

Surface tension

66.7mN/m at 62.6mg/L and 21℃

EPA Substance Registry System

Tall oil (8002-26-4)

Safety Information

Hazardous Substances Data

8002-26-4(Hazardous Substances Data)

TALL OIL Usage And Synthesis

Origin of Name

Tall is the Swedish word for pine, and the term tall oil is an American adaptation of tallolja, a Swedish product name associated with the kraft pulping process and with products from the fractional distillation of crude tall oil.
Abbreviations of basic tall oil names and common analyses often used in publications and reports are: Crude tall oil (CTO); Tall oil fatty acids (TOFA); Tall oil rosin (TOR); Distilled tall oil (DTO); Tall oil pitch (TOP); and Heads, light ends (H).

Uses

Paint vehicles, source of rosin, alkyd resins, soaps, cutting oils and emulsifiers, driers, flotation agents, oil-well drilling muds, core oils, lubricants and greases, asphalt derivatives, rubber reclaiming, synthesis of cortisone and sex hormones, chemical intermediates.

Definition

A mixture of rosin acids, fatty acids, and other materials obtained by acid treatment of the alkaline liquors from the digesting (pulping) of pine wood; flash p 360F (182C). Combustible.

Production Methods

Pine wood contains an extractable fraction, ≈3%, consisting of free and combined fatty and rosin acids and nonacidic compounds (tall oil components). In the alkaline pulping process the tall oil components are saponified into a soapy material that, when acidulated, gives a mixture of free rosin and fatty acids and neutral components—crude tall oil (CTO). CTO is refined mainly by vacuum distillation processes to separate the various compounds almost completely into rosin and fatty acid fractions.
The rosin part of CTO is a complex mixture of rosin acids, a threering fused system with the empirical formula C20H30O2. The tall oil fatty acids, primarily C18 types, are similar in composition to those derived from soybean oil. The neutral constituents of tall oil—predominantly esters, sterols, and hydrocarbons—are generally regarded as troublesome “impurities” that impair its utilization and distillation.

General Description

Oily yellow liquid. Less dense than water and insoluble in water. Hence floats on water. Obtained by acidifying the alkaline liquors obtained from digesting pine pulp.

Air & Water Reactions

Insoluble in water.

Reactivity Profile

TALL OIL are weakly acidic.

Flammability and Explosibility

Non flammable

Industrial uses

Different fatty acids used as collectors are mainly a mixture of oleic, linoleic, conjugated linoleic, palmitic and stearic acids. In the mineral industry, these fatty acids are known as tall oils. Actually, crude tall oils are converted by distillation into oils suitable as flotation collectors.
Tall oils are widely used for flotation of phosphates, lithium minerals (spodumene), silicates and rare-earth minerals (i.e. bastnaesite, monazite) where gravity separation is not possible because of the small size of the minerals. These collectors perform well on ores with simple gangue compositions and free from clay and slimes.

Safety Profile

A rmld allergen. A substance which migrates to food from packaging materials. Combustible whenexposed to heat or flame; can react with oxidizing materials. To fight fire, use dry chemical, CO2. When heated to decomposition it emits acrid smoke and irritating fumes

TALL OIL(8002-26-4)Related Product Information

• Amides, tall-oil fatty, N-[3-(dimethylamino)propyl]
• BUTYL TALLATE
• Fattyacids, tall-oil, ethoxylated
• Fatty acids, tall-oil, polymers with pentaerythritol, phthalic anhydride and rosin
• TALL OIL (FATTY ACIDS)
• Fatty acids, tall-oil, reaction products with 2-amino-2-(hydroxymethyl)-1,3-propanediol and formaldehyde
• Fatty acids, tall-oil, polymers with pentaerythritol and phthalic anhydride
• Fatty acids, tall-oil, polymers with benzoic acid, pentaerythritol and phthalic anhydride
• Fatty acids, tall-oil, polymers with bisphenol A and epichlorohydrin
• Fatty acids, tall-oil, iso-Pr esters
• Fatty acids, tall-oil, epoxidized, octyl esters
• Fatty acids, tall-oil, polymers with glycerol, pentaerythritol and phthalic anhydride
• Fatty acids, tall-oil, C10-16-alkyl esters, mixed with C15-18 alpha-alkenes, sulfurized
• Fatty acids, tall-oil, Pr esters, sulfated, sodium salts
• Resin acids and Rosin acids, tall-oil, reaction products with acrylic acid, potassium salts
• Fatty acids, tall-oil, reaction products with tetraethylenepentamine, dodecylbenzenesulfonates myristates
• Fatty acids, tall-oil, C7-9-alkyl esters, epoxidized, reaction products with acrylic acid
• Fatty acids, tall-oil, maleated, compds. with triethanolamine