1H-PYRROLO[2,3-C]PYRIDINE-2-CARBOXYLIC ACID ETHYL ESTER
1H-PYRROLO[2,3-C]PYRIDINE-2-CARBOXYLIC ACID ETHYL ESTER Basic information
- Product Name:
- 1H-PYRROLO[2,3-C]PYRIDINE-2-CARBOXYLIC ACID ETHYL ESTER
- Synonyms:
-
- 1H-PYRROLO[2,3-C]PYRIDINE-2-CARBOXYLIC ACID ETHYL ESTER
- ethyl 1H-pyrrolo[2,3-c]pyridine-2-carboxylate
- Ethyl 6-azaindole-2-carboxylate
- Ethyl 6-azaindole-2-carbo...
- ethyl 1H-pyrrolo[2,3-c]pyridine-2-carbo×ylate
- (E)-ethyl 3-(3-aminopyridin-4-yl)acrylate
- 1H-pyrrolo[2,3-c]pyridine-2-carboxylate
- 6-azaindole-2-carboxylic acid ethyl ester
- CAS:
- 24334-19-8
- MF:
- C10H10N2O2
- MW:
- 190.2
- Mol File:
- 24334-19-8.mol
1H-PYRROLO[2,3-C]PYRIDINE-2-CARBOXYLIC ACID ETHYL ESTER Chemical Properties
- Melting point:
- 207-208 °C
- Boiling point:
- 371.8±22.0 °C(Predicted)
- Density
- 1.272±0.06 g/cm3(Predicted)
- storage temp.
- Sealed in dry,Room Temperature
- pka
- 12.67±0.40(Predicted)
- Appearance
- White to off-white Solid
1H-PYRROLO[2,3-C]PYRIDINE-2-CARBOXYLIC ACID ETHYL ESTER Usage And Synthesis
Uses
Ethyl 1H-pyrrolo[2,3-c]pyridine-2-carboxylate is a useful research chemical.
Synthesis
95-92-1
180253-66-1
24334-19-8
1. tert-Butyl (4-methylpyridin-3-yl)carbamate (3.5 g, 16.8 mmol) was dissolved in anhydrous THF (30 ml) and cooled to -40 °C under argon protection. 2. tert-butyl lithium (20.7 ml, 1.7 M pentane solution, 35.2 mmol) was added slowly and the reaction mixture was kept stirred at -40 °C for 1 hour. 3. A solution of diethyl oxalate (2.5 ml, 18.5 mmol) in THF (30 ml) was added dropwise over 15 min. 4. the reaction mixture was warmed to 0 °C and stirring was continued for 2 h. The reaction mixture was then slowly warmed to room temperature and stirred for 19 h. The reaction mixture was then stirred for 1 h. The reaction mixture was then slowly warmed to room temperature. 5. 2N HCl (110 ml) was carefully added to the reaction mixture and heated to reflux for 2 hours. 6. After cooling, the organic phase was extracted by adding dichloromethane (100 ml) and the aqueous phase pH was adjusted to 8 and the organic phase was separated. 7. The aqueous phase was washed with dichloromethane (2 x 50 ml), the organic layers were combined, dried with magnesium sulfate and concentrated to give a light brown solid. 8. The solid was ground with ethyl acetate and the beige solid product (586 mg, 18%) was collected by filtration. LCMS (Method B): RT = 1.89min, M + H + = 190.
References
[1] Patent: US2010/216768, 2010, A1. Location in patent: Page/Page column 16-17
1H-PYRROLO[2,3-C]PYRIDINE-2-CARBOXYLIC ACID ETHYL ESTERSupplier
- Tel
- 13817811078
- sales@jingyan-chemical.com
- Tel
- 001-857-928-2050 or 1-888-588-9418
- sales@chemreagents.com
- Tel
- 86-0571-85151182
- Tel
- +86 (21) 6435-5022
- Tel
- 18986259541
- sales@3stc.com
1H-PYRROLO[2,3-C]PYRIDINE-2-CARBOXYLIC ACID ETHYL ESTER(24334-19-8)Related Product Information
- 6-AZAINDOLE-3-CARBOXYLIC ACID
- METHYL 1H-PYRROLO[3,2-B]PYRIDINE-5-CARBOXYLATE
- 1H-Pyrrolo[3,2-b]pyridine-3-aceticacid(8CI,9CI)
- 1H-Pyrido[2,3-b][1,4]oxazin-2(3H)-one(9CI)
- 1H-Pyrrolo[3,2-c]pyridine-2-carboxylic acid, Methyl ester
- 1H-Pyrrolo[2,3-b]pyridine-3-carboxylic acid, methyl ester
- METHYL 1H-PYRROLO[3,2-B]PYRIDINE-2-CARBOXYLATE
- 1H-pyrrolo[3,2-b]pyridine-3-carboxylic acid
- 1H-Pyrrolo[3,2-c]pyridine-3-ethanamine
- 1,5-Dihydropyrrolo[3,2-a]pyrimidine-2,4-dion
- (1H-Pyrrolo[2,3-c]pyridin-3-yl)MethanaMine
- methyl 1H-pyrrolo[3,2-b]pyridine-3-carboxylate
- 2-b]pyridin-3-aMine dihydrochloride
- 3-Cyano-4-azaindole
- Methyl 6-azaindole-3-carboxylate
- 1H-PYRROLO[3,2-B]PYRIDINE-2-CARBOXYLIC ACID
- 1H-PYRROLO[3,2-B]PYRIDINE-2-CARBALDEHYDE
- 1H-PYRAZOLO[3,4-B]PYRAZIN-3-AMINE