DI-T-BUTYL PHOSPHORIC ACID
DI-T-BUTYL PHOSPHORIC ACID Basic information
- Product Name:
- DI-T-BUTYL PHOSPHORIC ACID
- Synonyms:
-
- Di-tert-butyl hydrogen phosphate
- Phosphoric acid,bis(1,1-dimethylethyl) ester
- Phosphoric acid,bis(1,1-dimethylethyl) ester (9CI)
- DI-T-BUTYL PHOSPHORIC ACID
- DI-TERT-BUTYL PHOSPHORIC ACID
- Phosphoric acid di-tert-butyl ester
- itert-butylhydrogenphosphate
- CAS:
- 33494-81-4
- MF:
- C8H19O4P
- MW:
- 210.21
- EINECS:
- 608-874-0
- Mol File:
- 33494-81-4.mol
DI-T-BUTYL PHOSPHORIC ACID Chemical Properties
- Boiling point:
- 252℃
- Density
- 1.077
- Flash point:
- 106℃
- storage temp.
- 2-8°C
- pka
- 1.48±0.50(Predicted)
- Appearance
- White to off-white Solid
DI-T-BUTYL PHOSPHORIC ACID Usage And Synthesis
Chemical Properties
White powder
Uses
Di-tert-butyl phosphate (dtbp-H) is used with metal acetates in a high-yield synthetic procedure for the preparation of transition metal phosphate cages [M4(μ4-O)(dtbp)6] (M = Co, Zn).
Flammability and Explosibility
Flammable
Synthesis
13086-84-5
33494-81-4
General procedure for the synthesis of di-tert-butyl phosphate from di-tert-butyl phosphite: To an aqueous solution (170 ml) containing di-tert-butyl phosphite (38.8 g, 0.2 mol) and potassium bicarbonate (12.2 g, 0.12 mol), add finely pulverized potassium permanganate (23.1 g, 0.14 mol) in batches with stirring and under effective cooling (ice-salt bath) for about 1 hour. . The reaction temperature was maintained at 0°C to control the exothermic reaction. After addition, stirring was continued at room temperature for 30 minutes. Subsequently, the mixture was heated to 60°C and maintained for 15 minutes to promote coagulation of the manganese dioxide colloidal suspension, after which the manganese dioxide was removed by filtration. The filtrate was decolorized by boiling with the addition of activated carbon (3 g). The decolorized filtrate was used directly in the next step of the reaction. Concentrated hydrochloric acid (35 mL) was slowly added to the above filtrate under stirring and external cooling (0-5 °C) to induce precipitation of compound 2. The colorless crystalline precipitate was collected by filtration, washed with a small amount of ice water and finally dried under vacuum in the presence of phosphorus pentoxide to give compound 3 (40.0 g, 95% yield).
References
[1] Patent: WO2013/19169, 2013, A1. Location in patent: Paragraph 0227; 0228
[2] Patent: WO2008/14602, 2008, A1. Location in patent: Page/Page column 59
[3] Patent: WO2012/35548, 2012, A1. Location in patent: Page/Page column 39
[4] Patent: US2013/178443, 2013, A1. Location in patent: Paragraph 0932; 0933
[5] Patent: US2013/172249, 2013, A1. Location in patent: Paragraph 0295
DI-T-BUTYL PHOSPHORIC ACIDSupplier
- Tel
- 18202812219 18202812219
- 3884244356@qq.com
- Tel
- 13817811078
- sales@jingyan-chemical.com
- Tel
- 13811761079
- vscichem@163.com
- Tel
- 15026594951
- rs@raise-chem.com
- Tel
- 0411-62313318 13942603642
- info@allychem.com