Basic information Safety Supplier Related
ChemicalBook >  Product Catalog >  Flavors and fragrances >  Synthetic fragrances >  Ketones spices >  Acyclic aliphatic Ketones >  Isophorone oxide

Isophorone oxide

Basic information Safety Supplier Related

Isophorone oxide Basic information

Product Name:
Isophorone oxide
Synonyms:
  • ISOPHORONE OXIDE
  • 4,4,5A-TRIMETHYLPERHYDRO-1-BENZOXIREN-2-ONE
  • 2,3-Epoxy-3,5,5-trimethyl-1-cyclohexanone
  • 2,3-Epoxy-3,5,5-trimethylcyclohexane-1-one
  • 7-Oxabicyclo[4.1.0]heptan-2-one, 4,4,6-triMethyl-
  • 3,5,5-Trimethyl-2,3-epoxy-1-cyclohexanone 2,3-Epoxy-3,5,5-trimethyl-1-cyclohexanone 4,4,6-Trimethyl-7-oxabicyclo[4.1.0]heptan-2-one
  • 3,5,5-TriMecthyl-2,3-epoxy cyclohexanon
  • )-Epoxyisophorone
CAS:
10276-21-8
MF:
C9H14O2
MW:
154.21
Product Categories:
  • Epoxide Monomers
  • Monomers
  • EPOXYDE
  • Polymer Science
Mol File:
10276-21-8.mol
More
Less

Isophorone oxide Chemical Properties

Boiling point:
75-76 °C/6 mmHg (lit.)
Density 
0.994 g/mL at 25 °C (lit.)
refractive index 
n20/D 1.453(lit.)
Flash point:
182 °F
storage temp. 
Sealed in dry,Room Temperature
form 
clear liquid
color 
Colorless to Light yellow to Light orange
More
Less

Safety Information

Hazard Codes 
Xn
Risk Statements 
20/21/22-40
Safety Statements 
23-36
RIDADR 
UN 1993 / PGIII
WGK Germany 
3
HS Code 
29142990

MSDS

More
Less

Isophorone oxide Usage And Synthesis

Uses

Isophorone oxide could be rearranged to 3,5,5-trimethyl-1,2-cyclohexanedione and 2-formyl-2,4,4-trimethylcyclopentanone with high conversions and selectivities using zeolites and montmorillonite K10 as catalysts.

Synthesis

In a three-necked flask equipped with a dropping funnel, a mechanical stirrer, and a thermometer, a solution of 55.2 g (0.4 mol) of isophorone and 115 ml (1.2 mol) of 30% aqueous hydrogen peroxide in 400 ml of methanol. After the contents of the flask have been cooled to 15 ℃ using an ice bath, 33 ml (0.2 mol) of 6N aqueous sodium hydroxide is added, dropwise and with stirring, over 1 hour. During the addition, the temperature of the reaction mixture is maintained at 15–20℃ with a bath of cold water. After the addition is complete, the resulting mixture is stirred for 3 hours as the reaction mixture temperature is maintained at 20–25℃. The reaction mixture is then poured into 500 ml. of water, and the resulting mixture is extracted with two 400-ml portions of ether. The combined extracts are washed with water and dried over anhydrous magnesium sulfate. After the bulk of the ether has been removed by distillation (or flash distillation) through a 30-cm. Vigreux column at atmospheric pressure, the residual liquid is distilled through the Vigreux column under reduced pressure. The yield of isophorone oxide is 43–44.5 g. (70–72%).

References

[1] J. A. Elings, R. Sheldon, H. Lempers. “Zeolite-catalysed rearrangement of isophorone oxide.” Studies in Surface Science and Catalysis 15 1 (1997): 1165–1172.

Isophorone oxideSupplier

J & K SCIENTIFIC LTD.
Tel
010-82848833 400-666-7788
Email
jkinfo@jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108 18621169109
Email
market03@meryer.com
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Email
Sales-CN@TCIchemicals.com
Adamas Reagent, Ltd.
Tel
400-6009262 16621234537
Email
chenyj@titansci.com
Nanjing Chemlin Chemical Co., Ltd
Tel
025-83697070
Email
info@chemlin.com.cn