ERBIUM Chemical Properties

Melting point:

1529 °C (lit.)

Boiling point:

2868 °C (lit.)

Density 

9.062 g/mL at 25 °C (lit.)

refractive index 

1.47 (1300 nm)

solubility 

insoluble in H2O; soluble in acid solutions

form 

powder

color 

Silver-gray

Specific Gravity

9.006

Resistivity

86 μΩ-cm, 20°C

Water Solubility 

Soluble in acids. Insoluble in water.

Sensitive 

Moisture Sensitive

Merck 

13,3675

Exposure limits

ACGIH: TWA 2 ppm; STEL 4 ppm
OSHA: TWA 2 ppm(5 mg/m3)
NIOSH: IDLH 25 ppm; TWA 2 ppm(5 mg/m3); STEL 4 ppm(10 mg/m3)

CAS DataBase Reference

7440-52-0(CAS DataBase Reference)

EPA Substance Registry System

Erbium (7440-52-0)

Safety Information

Hazard Codes 

F

Risk Statements 

11

Safety Statements 

43-Neverusewater.

RIDADR 

UN 3089 4.1/PG 2

WGK Germany 

3

F 

1-10

TSCA 

Yes

HazardClass 

8

PackingGroup 

III

HS Code 

2846902035

MSDS

• Language:English Provider:ACROS
• Language:English Provider:SigmaAldrich
• Language:English Provider:ALFA

ERBIUM Usage And Synthesis

Chemical Properties

grey powder

Physical properties

Erbium is a soft, malleable metal with a silvery metallic luster that only tarnishes (oxidizes)slightly in air. It is one of the rare-earths of the yttrium subgroup of the lanthanide series.
Its melting point is 1,529°C, its boiling point is 2,868°C, and its density is 9.07g/cm³.

Isotopes

There are 39 isotopes of erbium, six of which are stable: Er-162, Er-164, Er-166,Er-167, Er-168, and Er-170. These six isotopes make up the total atomic weight (mass)of erbium, and all the other isotopes are artificially made and short-lived. Their half-livesrange from 200 nanoseconds to 49 hours.

Origin of Name

Named for the quarry in Ytterby, Sweden, where ores and minerals of many elements are found.

Occurrence

Erbium ranks 17th in abundance among the rare-earths, and it is the 46th most abundantelement found in the Earth’s crust. It exists in only 2.5 ppm, meaning that about 2.5 poundsof erbium could be extracted from one million pounds of dirt in the Earth’s crust. Higher concentrationsare found in some areas, but in general, the oxides of erbium are rather scarce.It is found in ores such as monazite, gadolinite, and bastnasite. It was first separated intothree elements in 1843 (yttria, erbia, and terbia). Erbium is also produced as a by-product ofnuclear fission of uranium.

History

Erbium, one of the so-called rare-earth elements of the lanthanide series, is found in the minerals mentioned under dysprosium above. In 1842 Mosander separated “yttria,” found in the mineral gadolinite, into three fractions which he called yttria, erbia, and terbia. The names erbia and terbia became confused in this early period. After 1860, Mosander’s terbia was known as erbia, and after 1877, the earlier known erbia became terbia. The erbia of this period was later shown to consist of five oxides, now known as erbia, scandia, holmia, thulia and ytterbia. By 1905 Urbain and James independently succeeded in isolating fairly pure Er₂O₃. Klemm and Bommer first produced reasonably pure erbium metal in 1934 by reducing the anhydrous chloride with potassium vapor. The pure metal is soft and malleable and has a bright, silvery, metallic luster. As with other rare-earth metals, its properties depend to a certain extent on the impurities present. The metal is fairly stable in air and does not oxidize as rapidly as some of the other rare-earth metals. Naturally occurring erbium is a mixture of six isotopes, all of which are stable. Twenty-seven radioactive isotopes of erbium are also recognized. Recent production techniques, using ion-exchange reactions, have resulted in much lower prices of the rare-earth metals and their compounds in recent years. The cost of 99.9% erbium metal is about $21/g. Erbium is finding nuclear and metallurgical uses. Added to vanadium, for example, erbium lowers the hardness and improves workability. Most of the rare-earth oxides have sharp absorption bands in the visible, ultraviolet, and near infrared. This property, associated with the electronic structure, gives beautiful pastel colors to many of the rare-earth salts. Erbium oxide gives a pink color and has been used as a colorant in glasses and porcelain enamel glazes.

Characteristics

Although erbium is magnetic at very low temperatures, it is antiferromagnetic and becomesa superconductor at temperatures near absolute zero. It is insoluble in water but soluble inacids. Its salts range from pink to red. Erbium and some of the other rare-earth elements areconsidered to be “impurities” in the minerals in which they are found. Small quantities oferbium can also be separated from several other rare-earths.

Uses

Erbium has limited commercial use, but it is used as an alloy metal for vanadium to makeit easier to work and to form spring steel. The oxide of erbium is pink, which is used to colorglass and to make lasers that will operate at normal room temperatures. It has limited use ascontrol rods in nuclear fission reactors.

Uses

Erbium foil used in Physical Vapor Deposition (PVD) processes, including thermal and electron-beam (e-beam) evaporation, for the preparation of thin films. It is used as an alloying element with titanium and is also used to produce infra-red absorbing glass.

Uses

Erbium has application in glass coloring, as an amplifier in fiber optics, and in lasers for medical and dental use.
It is commonly used as a photographic filter, and because of its resilience it is useful as a metallurgical additive.
The Erbium ion has a very narrow absorption band coloring erbium salts pink. It is therefore used in eyeware and decorative glassware. It can neutralize discoloring impurities such as ferric ions and produce a neutral gray shade. It is used in a variety of glass products for this purpose.
Lasers based on Er:YAG are ideally suited for surgical applications because of its ability to deliver energy without thermal build-up in tissue.
Erbium Metal, is mainly metallurgical uses. Added to vanadium, for example, Erbium lowers hardness and improves workability. There are also a few applications for nuclear industry. Erbium Metal can be further processed to various shapes of ingots, pieces, wires, foils, slabs, rods, discs and powder.

Definition

Element with atomic number 68, aw 167.26, valence of 3; one of the rare-earth elements of the yttrium subgroup.

Definition

A soft malleable silvery element of the lanthanoid series of metals. It occurs in association with other lanthanoids. Erbium has uses in the metallurgical and nuclear industries and in making glass for absorbing infrared radiation. Symbol: Er; m.p. 1529°C; b.p. 2863°C; r.d. 9.066 (25°C); p.n. 68; r.a.m. 167.26.

Definition

erbium: Symbol Er. A soft silverymetallic element belonging to thelanthanoids; a.n. 68; r.a.m. 167.26;r.d. 9.006 (20°C); m.p. 1529°C; b.p.2863°C. It occurs in apatite, gadolinite,and xenotine from certainsources. There are six natural isotopes,which are stable, and twelveartificial isotopes are known. It hasbeen used in alloys for nuclear technologyas it is a neutron absorber; itis being investigated for other potentialuses. It was discovered by CarlMosander (1797–1858) in 1843.

Hazard

Flammable in finely divided form.

Hazard

Erbium nitrate [Er(NO₃)₃] may explode when “shocked” or at high temperatures. As withother rare-earths, erbium and its compounds should be handled with care because they canbe toxic.

ERBIUM(7440-52-0)Related Product Information

• ERBIUM TRI-I-PROPOXIDE
• ERBIUM
• Erbium iodide (ErI3)
• Erbium(III) oxide
• Erbium(III) nitrate pentahydrate
• ERBIUM CARBONATE HYDRATE
• Erbium chloride (ErCl3)
• ERBIUM FLUORIDE
• ERBIUM SULFIDE
• ERBIUM CHLORIDE HEXAHYDRATE
• ERBIUM ACETATE TETRAHYDRATE
• ERBIUM NITRIDE
• ERBIUM SULFATE
• ERBIUM TRIS[3-(TRIFLUOROMETHYLHYDROXYMETHYLENE)-(+)-CAMPHORATE]
• ERBIUM TRIFLUOROACETATE
• TRIS(METHYLCYCLOPENTADIENYL)ERBIUM
• TRIS(BUTYLCYCLOPENTADIENYL)ERBIUM,TRIS(N-BUTYLCYCLOPENTADIENYL)ERBIUM
• ERBIUM PHOSPHIDE