Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Triacetonediamine > Triacetonediamine(36768-62-4)

Triacetonediamine(36768-62-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

Triacetonediamine

Synonyms

2,2,6,6-Tetramethyl-4-aminopiperidine
2,2,6,6-Tetramethyl-4-piperidinamine
2,2,6,6-Tetramethyl-4-piperidylamine
2,2,6,6-Tetramethylpiperidin-4-amine
4-Amino-2,2,6,6-tetramethylpiperidine

CAS

36768-62-4

Formula

C9H20N2

Molecular Weight

156.27000000000001

EINECS

253-197-2

RTECS

TM4290100

RTECS Class

Other

Beilstein/Gmelin

105038

Beilstein Reference

5-22-08-00162

EC Class

harmful, corrosive

More
Less

Physical and Chemical Properties

Appearance

Clear slightly yellow liquid.

Solubility in water

Very soluble

Melting Point

12 - 15

Boiling Point

188

Density

0.8966 g/cm3 (20 C)

pKa/pKb

2.94 (pKb)

Vapor Density

5.39

Refractive Index

1.4699 (20 C)

More
Less

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Inhalation

Causes respiratory tract irritation. Aspiration may lead to pulmonary edema. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.

Skin

May cause irritation and dermatitis. May cause cyanosis of the extremities.

Eyes

Causes eye irritation. May cause chemical conjunctivitis and corneal damage.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May be harmful if swallowed.

EC Risk Phrase

R 22 34

EC Safety Phrase

S 26 36/37/39 45

UN (DOT)

2735

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Exposure Effects

Effects may be delayed.

More
Less

Fire Fighting Measures

Flash Point

75

Autoignition

300

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

More
Less

Stability and Reactivity

Incompatibilities

Oxidizing agents

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Decomposition

Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.

More
Less

Transport Information

UN Number

2735

HS Code

2933 39 99

More
Less

ContactMore

Wuhan hongde yuexin pharmaceutical technology co. LTD
Tel
027-83855391
Fax
027-83855391
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList928012/0.htm
Weifang QianJin Fine Chemical Co., Ltd.
Tel
0536-2457064
Fax
0536-8897109
WebSite
http://www.qianjinchemical.com
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
4006608290;
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
INTATRADE GmbH
Tel
+49 3493/605464
Fax
+49 3493/605470
WebSite
http://www.intatrade.de/