Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 1,2-Benzenedicarboxylic acid di-2-propenyl ester > 1,2-Benzenedicarboxylic acid di-2-propenyl ester(131-17-9)

1,2-Benzenedicarboxylic acid di-2-propenyl ester(131-17-9)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

1,2-Benzenedicarboxylic acid di-2-propenyl ester

Synonyms

1,2-Benzenedicarboxylic acid, di-2-propenyl ester
Allyl phthalate
Diprop-2-enyl benzene-1,2-dicarboxylate
o-Phthalic acid, diallyl ester

CAS

131-17-9

Formula

C14H14O4

Molecular Weight

246.27

EINECS

205-016-3

RTECS

CZ4200000

RTECS Class

Tumorigen; Mutagen; Primary Irritant

Beilstein/Gmelin

1880877

Beilstein Reference

4-09-00-03188

EC Index Number

607-086-00-4

EC Class

Harmful; Dangerous for the Environment

More
Less

Physical and Chemical Properties

Appearance

Clear pale-yellow liquid. Odorless.

Solubility in water

200 mg/L

Melting Point

-70

Boiling Point

290

Vapor Pressure

3.70E-05 (25 C)

Density

1.122 g/cm3 (15 C)

Partition Coefficient

3.23

Usage

Most diallyl phthalate compounds are sold under military specification and are used in critical electricalelectronic applications requiring high reliability under long-term, adverse environmental conditions. A significant application area is in electronic connectors in communications, computer and aerospace systems. Other uses are insulators, potentiometers, and circuit boards.

Vapor Density

8.3

Refractive Index

1.5146 (20 C)

More
Less

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

More
Less

Handling and Storage

Storage

Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.

More
Less

Hazards Identification

Ingestion

May cause digestive tract disturbances. May be harmful if swallowed.

Inhalation

May cause respiratory tract irritation.

Skin

May cause skin irritation.

Eyes

May cause eye irritation. Lachrymator.

EC Risk Phrase

R 22 50/53

EC Safety Phrase

S 24/25 60 61

UN (DOT)

3082

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Poison Class

4

More
Less

Fire Fighting Measures

Flash Point

165

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: Water spray may cause frothing. Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Fire Potential

This chemical is combustible.

More
Less

Accidental Release Measures

Small spills/leaks

Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.

More
Less

Stability and Reactivity

Disposal Code

1

Incompatibilities

Can react with oxidizers Incompatible with water and oxygen.

Stability

Stable under normal temperatures and pressures.

Decomposition

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

More
Less

Transport Information

UN Number

3082

HS Code

2917 34 00

More
Less

ContactMore

Shouguang Nuomeng Chemical Co Ltd.
Tel
536-5399456
Fax
0536-5399456
WebSite
http://www.nuomengchem.com
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
4006608290;
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
3B Pharmachem (Wuhan) International Co.,Ltd.
Tel
821-50328103-801
Fax
86-21-50328109
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList13285/0.htm
future industrial shanghai co., ltd
Tel
400-0066400
Fax
021-55660885
WebSite
http://www.jonln.com