Product Identification

Product Name

3-Chlorobenzaldehyde

Synonyms

m-Chlorobenzaldehyde
m-Chlorobenzenecarboxaldehyde

CAS

587-04-2

Formula

C7H5ClO

Molecular Weight

140.57

EINECS

209-596-9

Beilstein/Gmelin

507098

Beilstein Reference

4-07-00-00566

EC Class

irritant

Physical and Chemical Properties

Appearance

Odorless, clear, light yellow liquid.

Solubility in water

Slightly soluble

Melting Point

17 - 18

Boiling Point

214

Density

1.241 g/cm3

Partition Coefficient

2.26

Vapor Density

4.8

Refractive Index

1.5650 (20 C)

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Get medical aid if irritation or symptoms occur.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.

Skin

Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. If irritation develops, get medical aid.

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Use only in a well ventilated area. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Wash clothing before reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion

Causes gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.

Inhalation

Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.

Skin

Causes skin irritation. The toxicological properties of this material have not been fully investigated.

Eyes

Causes eye irritation. The toxicological properties of this material have not been fully investigated.

Hazards

When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.

EC Risk Phrase

R 36/37/38

EC Safety Phrase

S 26 36

UN (DOT)

2810

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point

88

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.

Fire Potential

Combustible material: may burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation.

Stability and Reactivity

Disposal Code

2

Incompatibilities

Oxidizing agents

Stability

Stable under normal temperatures and pressures.

Decomposition

Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number

2810

Hazard Class

6.1

Packing Group

I; II; III

HS Code

2913 00 00