Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 2-Amino-4-nitrophenol-6-sulfonic acid > 2-Amino-4-nitrophenol-6-sulfonic acid(96-67-3)

2-Amino-4-nitrophenol-6-sulfonic acid(96-67-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
More
Less

Product Identification

Product Name

2-Amino-4-nitrophenol-6-sulfonic acid

Synonyms

2-Hydroxy-5-nitrometanilic acid
3-Amino-2-hydroxy-5-nitrobenzenesulfonic acid
Benzenesulfonic acid, 3-amino-2-hydroxy-5-nitro-

CAS

96-67-3

Formula

C6H6N2O6S

Molecular Weight

234.18

EINECS

202-523-1

RTECS

OY2357500

RTECS Class

Primary Irritant

Beilstein/Gmelin

3369869

Beilstein Reference

2-14-00-00486

More
Less

Physical and Chemical Properties

Appearance

Brown powder.

Solubility in water

Very soluble

Melting Point

285

pKa/pKb

12.20 (pKb)

Partition Coefficient

-.7

More
Less

First Aid Measures

Ingestion

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.

Inhalation

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.

Skin

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.

Eyes

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

More
Less

Handling and Storage

Storage

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

Handling

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

More
Less

Hazards Identification

Ingestion

See inhalation.

Inhalation

Symptoms of exposure to this compound may include irritation of the skin, eyes and mucous membranes.

Skin

See inhalation.

Eyes

See inhalation

More
Less

Exposure Controls/Personal Protection

Personal Protection

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.

Respirators

Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.

Poison Class

4

More
Less

Fire Fighting Measures

Fire Fighting

Fires involving this compound can be controlled using a dry chemical, carbon dioxide, or Halon extinquisher.

More
Less

Accidental Release Measures

Small spills/leaks

If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a strong soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

More
Less

Stability and Reactivity

Incompatibilities

May react with strong oxidizers and mineral acids May react with bases.

Stability

No data.

More
Less

ContactMore

J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
TAIYUAN RHF CO.,LTD.
Tel
+86 351 7031519
Fax
+86 351 7031519
WebSite
http://www.rhfchem.com/
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Fax
021-67121385
WebSite
https://www.tcichemicals.com/CN/zh/
Pure Chemistry Scientific Inc.
Tel
001-857-928-2050 or 1-888-588-9418
Fax
001-617-206-9595
WebSite
http://www.chemreagents.com
China Langchem Inc.
Tel
0086-21-58956006
Fax
0086-21-58956100
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList19141/0.htm