Butyl sulfide(544-40-1)
Product Identification
Product Name
Butyl sulfide
Synonyms
1,1'-Thiobisbutane
1-Butylsulfanylbutane
Butylthiobutane
n-Butyl sulfide
Thiononane-5
CAS
544-40-1
Formula
C8H18S
Molecular Weight
146.30000000000001
EINECS
208-870-5
RTECS
ER6417000
RTECS Class
Primary Irritant
Merck
12,1626
Beilstein/Gmelin
1732829
Beilstein Reference
4-01-00-01559
First Aid Measures
Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation
Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Skin
Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Handling and Storage
Storage
Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container.
Handling
Wash thoroughly after handling. Wash hands before eating. Use only in a well ventilated area. Avoid breathing dust, vapor, mist, or gas. Do not get on skin or in eyes. Avoid ingestion and inhalation.
Exposure Controls/Personal Protection
Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Accidental Release Measures
Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Scoop up with a nonsparking tool, then place into a suitable container for disposal.
ContactMore
- Tel
- 4008-755-333
- Fax
- 028-86757656
- WebSite
- http://www.aikeshiji.com
- Tel
- 0532-80932738
- Fax
- 0532-80932738
- WebSite
- http://www.rivmat.com/
- Tel
- 027-83238443
- Fax
- 027-83238443
- WebSite
- http://www.tonsooh.com/
- Tel
- 021-50182298 021-50180596
- Fax
- +86-21-57758967
- WebSite
- http://www.boylechem.com
- Tel
- 010-82848833
- Fax
- 86-10-82849933
- WebSite
- http://www.jkchemical.com