Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > Primidone > Primidone(125-33-7)

Primidone(125-33-7)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
More
Less

Product Identification

Product Name

Primidone

Synonyms

2-Deoxyphenobarbital
2-Desoxyphenobarbital
5-Ethyl-5-phenyl-1,3-diazinane-4,6-dione
5-Ethyl-5-phenylhexahydropyrimidine-4,6-dione
5-Ethylhexahydro-4,6-dioxo-5-phenylpyrimidine
Desoxyphenobarbitone

CAS

125-33-7

Formula

C12H14N2O2

Molecular Weight

218.26

EINECS

204-737-0

RTECS

UV9100000

RTECS Class

Tumorigen; Drug; Mutagen; Reproductive Effector; Human Data

Merck

12,7927

Beilstein/Gmelin

218034

Beilstein Reference

5-24-08-00102

More
Less

Physical and Chemical Properties

Appearance

Odorless white crystalline powder. Slightly bitter taste. No acidic properties.

Solubility in water

Insoluble

Melting Point

289

Partition Coefficient

.91

Usage

Terap cat: anticonvulsant, therap cat (vet): anticonvulsant. Chiefly to control epileptiform seizures.

More
Less

First Aid Measures

Ingestion

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.

Inhalation

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.

Skin

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.

Eyes

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. If symptoms (such as redness or irritation) develop, immediately transport the victim to a hospital.

More
Less

Handling and Storage

Storage

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

Handling

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

More
Less

Hazards Identification

Inhalation

Respiratory arrest and pulmonary edema may occur especially following intravenous administration.

Ingestion

Respiratory arrest and pulmonary edema may occur especially following intravenous administration.

More
Less

Exposure Controls/Personal Protection

Personal Protection

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.

Respirators

Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.

Exposure Effects

ataxia, lethargy, and coma are frequently reported following overdose.

More
Less

Fire Fighting Measures

Fire Fighting

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher.

Fire Potential

This material is probably combustible.

More
Less

Accidental Release Measures

Small spills/leaks

If you spill this chemical, you should dampen the solid spill material with water, then transfer the dampened material to a suitable container. Use absorbent paper dampened with water to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Wash all contaminated surfaces with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

More
Less

Stability and Reactivity

Incompatibilities

May react with azo and diazo compounds to generate toxic gases May react with strong reducing agents to form flammable gases.

Stability

No data.

More
Less

ContactMore

Essence Pharmaceutical Group Nantong Co., Ltd.
Tel
0513-81953027
Fax
NULL
WebSite
http://www.ntgpf.com
Shanghai Boyle Chemical Co., Ltd.
Tel
021-50182298 021-50180596
Fax
+86-21-57758967
WebSite
http://www.boylechem.com
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
3B Pharmachem (Wuhan) International Co.,Ltd.
Tel
821-50328103-801
Fax
86-21-50328109
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList13285/0.htm