Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 3,3-Dimethylbutyric acid > 3,3-Dimethylbutyric acid(1070-83-3)

3,3-Dimethylbutyric acid(1070-83-3)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

3,3-Dimethylbutyric acid

Synonyms

3,3-Dimethylbutanoic acid
3,3-Dimethylbutyric acid

CAS

1070-83-3

Formula

C6H12O2

Molecular Weight

116.16

EINECS

213-982-2

Merck

13,1537

Beilstein/Gmelin

1740427

Beilstein Reference

4-02-00-00955

More
Less

Physical and Chemical Properties

Appearance

Clear, colorless liquid. With a stench.

Melting Point

7

Boiling Point

185

Vapor Pressure

0.07 (10 C)

Density

0.9303 g/cm3 (0 C)

pKa/pKb

4.79 (pKa)

Vapor Density

4

Refractive Index

1.4115 (20 C)

More
Less

First Aid Measures

Ingestion

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration.

Skin

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.

Eyes

Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.

Handling

Wash thoroughly after handling. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Ingestion

May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.

Inhalation

May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract.

Skin

Causes skin burns.

Eyes

Causes eye burns.

Hazards

When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.

EC Risk Phrase

R 34

EC Safety Phrase

S 26 36/37/39 45

UN (DOT)

3265

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Poison Class

5

More
Less

Fire Fighting Measures

Flash Point

88

Autoignition

495

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.

Fire Potential

Combustible material: may burn but does not ignite readily.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Scoop up with a nonsparking tool, then place into a suitable container for disposal. Remove all sources of ignition. Provide ventilation.

More
Less

Stability and Reactivity

Incompatibilities

Oxidizing agents.

Stability

Stable under normal temperatures and pressures.

Decomposition

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

3265

Hazard Class

8

Packing Group

I; II; III

More
Less

ContactMore

Shaoxing Fangxiao Chemical Co., LTD
Tel
+86-13456999252;
WebSite
http://www.fangxiaochem.com/
NANJING SHUNXIANG PHARMACEUTICAL TECHNOLOGY CO.,LTD.
Tel
139-51004015
Fax
025-86819859
WebSite
http://www.sunxiangchem.com/
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
3B Pharmachem (Wuhan) International Co.,Ltd.
Tel
821-50328103-801
Fax
86-21-50328109
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList13285/0.htm