Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > Fluometuron > Fluometuron(2164-17-2)

Fluometuron(2164-17-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
More
Less

Product Identification

Product Name

Fluometuron

Synonyms

1,1-Dimethyl-3-(a,a,a-trifluoro-m-tolyl)urea
3-(3-Trifluoromethylphenyl)-1,1-dimethylurea
Ciba 2059
Cotoran
N,N-Dimethyl-N'-[3-(trifluoromethyl)phenyl]urea
Pakhtaran

CAS

2164-17-2

Formula

C10H11F3N2O

Molecular Weight

232.21

EINECS

218-500-4

RTECS

YT1575000

RTECS Class

Agricultural Chemical and Pesticide; Tumorigen; Mutagen

Merck

12,4189

Beilstein/Gmelin

2217354

More
Less

Physical and Chemical Properties

Appearance

White crystals or powder.

Solubility in water

Insoluble

Boiling Point

324

Vapor Pressure

0.0003 (25 C)

Density

1.39 g/cm3 (20 C)

Partition Coefficient

2.42

Heat Of Vaporization

56.6 kJ/mol

Usage

Herbicide.

More
Less

First Aid Measures

Ingestion

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.

Inhalation

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.

Skin

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.

Eyes

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

More
Less

Handling and Storage

Storage

Store in cool, dry, well ventilated, secure area out of reach of children and animals.

Handling

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

More
Less

Hazards Identification

Ingestion

Nausea, vomiting, and diarrhea may be noted following ingestion.

Inhalation

Symptoms of exposure to this chemical may include possible convulsions or coma; irritation to the skin, gastrointestinal tract, respiratory tract; and lowered blood pressure.

Skin

Cyanosis unresponsive to oxygen therapy may be noted in patients with methemoglobinemia due to absorption of excessive amounts of these agents.

Eyes

See inhalation

More
Less

Exposure Controls/Personal Protection

Personal Protection

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.

Respirators

Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.

Poison Class

4

More
Less

Fire Fighting Measures

Flash Point

150

Fire Fighting

Fires involving this material may be controlled using a dry chem

More
Less

Accidental Release Measures

Small spills/leaks

Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

More
Less

Stability and Reactivity

Incompatibilities

May react with hypochlorites to form nitrogen trichloride which

Stability

No data.

More
Less

ContactMore

J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Fax
021-67121385
WebSite
https://www.tcichemicals.com/CN/zh/
Syntechem Co.,Ltd
Fax
E-Mail Inquiry
WebSite
http://www.syntechem.com/
Sichuan Kulinan Technology Co., Ltd
Tel
400-1166-196
Fax
028-84555506 800101999
WebSite
http://www.hx-r.com/