Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Glymo > Glymo(2530-83-8)

Glymo(2530-83-8)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

Glymo

Synonyms

3-(Trimethoxysilyl)propyl glycidyl ether
3-Glycidoxypropyltrimethoxysilane
Silane A 187
Silicone KMB 403
Trimethoxy-[3-(oxiran-2-ylmethoxy)propyl]silane

CAS

2530-83-8

Formula

C9H20O5Si

Molecular Weight

236.34

EINECS

219-784-2

RTECS

VV4025000

RTECS Class

Organometallic; Mutagen; Reproductive Effector; Primary Irritant

Beilstein/Gmelin

4308125

EC Class

irritant, dangerous for the environment

More
Less

Physical and Chemical Properties

Appearance

Clear, colorless liquid.

Solubility in water

Slightly soluble

Melting Point

0

Boiling Point

299

Vapor Pressure

0.002 (25 C)

Density

1.07 g/cm3

Partition Coefficient

.28

Heat Of Vaporization

51.8 kJ/mol

Vapor Density

8.15

Refractive Index

1.43 (20 C)

More
Less

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Do not allow contact with water. Keep from contact with moist air and steam.

More
Less

Hazards Identification

Inhalation

May cause respiratory tract irritation. Can produce delayed pulmonary edema.

Skin

Causes mild skin irritation. May be harmful if absorbed through the skin.

Eyes

Causes mild eye irritation. May cause chemical conjunctivitis.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.

EC Risk Phrase

R 36/38

EC Safety Phrase

S 26 36

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

May cause reproductive and fetal effects. Effects may be delayed. Laboratory experiments have resulted in mutagenic effects.

More
Less

Fire Fighting Measures

Flash Point

82

Autoignition

400

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Do NOT get water inside containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation. Do not get water inside containers.

More
Less

Stability and Reactivity

Incompatibilities

Oxidizing agents, moisture.

Stability

Stable under normal temperatures and pressures.

Decomposition

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, silicon oxide, formaldehyde.

More
Less

Transport Information

HS Code

2931 00 95

More
Less

ContactMore

Chembridge International Corp.(Taipei/Dongguan/Nanjing)
Tel
025-84712192
Fax
025-84712052
WebSite
http://www.chembridge.com.tw
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
HUANSHAN KBR CHEMICAL CO., LTD
Tel
0559-2335676-658
Fax
18155919527
WebSite
http://www.kbrchem.com
Wuhan Xinyang Ruihe Chemical Technology Co., Ltd.
Tel
13720181483
WebSite
http://www.ruihechem.com/index.html
HUANGSHANJIAHUASILICONE CO,LTD
Tel
15212785412;
WebSite
https://www.jiahuasilicon.com