Product Identification

Product Name

Trimethylsilyl triflate

Synonyms

Methanesulfonic acid, trifluoro-, trimethylsilyl ester
TMS triflate
Trimethylsilanol trifluoromethanesulfonate
Trimethylsilyl trifluoromethanesulfonate
Trimethylsilyl trifluoromethylsulfonate

CAS

27607-77-8

Formula

C4H9F3O3SSi

Molecular Weight

222.26

EINECS

248-565-4

Merck

12,9849

Beilstein/Gmelin

1868911

EC Class

flammable

Physical and Chemical Properties

Appearance

Clear slightly yellow liquid.

Solubility in water

Insoluble

Boiling Point

77

Density

1.225 g/cm3 (20 C)

Usage

Catalyst and silylating agent for organic syntheses.

Vapor Density

7.7

Refractive Index

1.3630 (20 C)

First Aid Measures

Ingestion

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration.

Skin

Get medical aid immediately. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.

Eyes

Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Keep under a nitrogen blanket. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area.

Handling

Wash thoroughly after handling. Use only in a well ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion

May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.

Inhalation

May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. Vapors may cause dizziness or suffocation.

Skin

Causes skin burns.

Eyes

Causes eye burns.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

EC Risk Phrase

R 10 14 34 37

EC Safety Phrase

S 26 36/37 45

UN (DOT)

2924

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear a chemical apron. Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point

38

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Reacts violently with water. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT get water inside containers. Do NOT use straight streams of water.

Fire Potential

Flammable/combustible material. May be ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Stability and Reactivity

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Incompatibilities

Strong oxidizing agents.

Decomposition

Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen fluoride, silicon oxide.

Combustion Products

Fire will produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number

2924

Hazard Class

3

Packing Group

I; II; III

HS Code

2931 00 95