Product Identification

Product Name

Phenylacetic acid sodium salt

Synonyms

(2R)-2-Phenyloxirane
(R)-(Epoxyethyl)benzene
(R)-Styrene oxide

CAS

20780-53-4

Formula

C8H8O

Molecular Weight

120.15

RTECS

CZ9625010

RTECS Class

Mutagen

Beilstein/Gmelin

1984

Beilstein Reference

5-17-01-00577

Physical and Chemical Properties

Appearance

Clear yellow to brown.

Melting Point

-37

Boiling Point

194

Density

1.05 g/cm3

Refractive Index

1.53 (20 C)

First Aid Measures

Ingestion

Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately.

Skin

Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.

Handling and Storage

Storage

Store in a cool, dry place. Keep container closed when not in use. Refrigerator (approx 4 C).

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear safety glasses and chemical goggles if splashing is possible. Skin: Wear appropriate protective gloves and clothing to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.

Respirators

Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.

Exposure Effects

The toxicological properties of this material have not been investigated.

Fire Fighting Measures

Flash Point

74

Autoignition

498

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment.

Stability and Reactivity

Incompatibilities

Acids - bases - oxidizing agents.

Stability

Stable under normal temperatures and pressures.

Decomposition

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

Transport Information

UN Number

2810

Hazards Identification

EC Risk Phrase

R 45 21 36

EC Safety Phrase

S 53 45

UN (DOT)

2810