Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 1-Iodo-2-methylpropane > 1-Iodo-2-methylpropane(513-38-2)

1-Iodo-2-methylpropane(513-38-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

1-Iodo-2-methylpropane

Synonyms

Iodomethylpropane
Isobutyl iodine

CAS

513-38-2

Formula

C4H9I

Molecular Weight

184.02

EINECS

208-160-5

RTECS

TZ4250000

RTECS Class

Mutagen

Merck

13,5160

Beilstein/Gmelin

1730927

Beilstein Reference

4-01-00-00299

EC Class

highly flammable, harmful

More
Less

Physical and Chemical Properties

Appearance

Clear, pink liquid.

Solubility in water

Insoluble

Melting Point

-90.7

Boiling Point

120

Vapor Pressure

20 (25 C)

Density

1.605 g/cm3 (20 C)

Vapor Density

6

Refractive Index

1.49429 (15 C)

More
Less

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.

Inhalation

Remove from exposure to fresh air immediately. Get medical aid if cough or other symptoms appear.

Skin

Get medical aid if irritation develops or persists. Flush skin with plenty of soap and water.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Do not store in direct sunlight. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Use with adequate ventilation. Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Ingestion

May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.

Inhalation

Harmful if inhaled. May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.

Skin

May cause skin irritation.

Eyes

May cause eye irritation.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.

EC Risk Phrase

R 11 20 36/37/38

EC Safety Phrase

S 16 23 26 36/37/39

UN (DOT)

2391

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

More
Less

Fire Fighting Measures

Flash Point

12

Fire Fighting

Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Use alcohol foam, dry chemical or carbon dioxide. Keep run-off water out of sewers and water sources.

Fire Potential

HIGHLY FLAMMABLE.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition.

More
Less

Stability and Reactivity

Stability

No data.

Incompatibilities

Strong oxidizing agents, strong bases.

Decomposition

Carbon monoxide, carbon dioxide, hydrogen iodide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

2391

Hazard Class

3

Packing Group

II

HS Code

2903 30 80

More
Less

ContactMore

Manac (SHANGHAI) TRADING CO., LTD
Tel
021-32503616
Fax
021-32503616
WebSite
http://manac-inc.com.cn
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
3B Pharmachem (Wuhan) International Co.,Ltd.
Tel
821-50328103-801
Fax
86-21-50328109
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList13285/0.htm
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
WebSite
http://chemicals.thermofisher.cn
TAIYUAN RHF CO.,LTD.
Tel
+86 351 7031519
Fax
+86 351 7031519
WebSite
http://www.rhfchem.com/