Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Benzo[j,k]fluorene > Benzo[j,k]fluorene(206-44-0)

Benzo[j,k]fluorene(206-44-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

Benzo[j,k]fluorene

Synonyms

1,2-Benzacenapthene
Benzo(j,k)fluorene
Idryl

CAS

206-44-0

Formula

C16H10

Molecular Weight

202.26

EINECS

205-912-4

RTECS

LL4025000

RTECS Class

Tumorigen; Mutagen

Beilstein/Gmelin

1907918

Beilstein Reference

4-05-00-02463

More
Less

Physical and Chemical Properties

Appearance

Light yellow fine crystals.

Solubility in water

Insoluble

Melting Point

110

Boiling Point

375

Vapor Pressure

2E-5 (25 C)

Density

1.128 g/cm3 (20 C)

Partition Coefficient

5.16

Heat Of Vaporization

66.6 kJ/mol

Usage

Constituent of coal tar & petroleum derived asphalt used as lining material to protect interior of steel & ductile-iron potable water pipes and storage tanks.

Refractive Index

1.6877 (20 C)

More
Less

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Remove contaminated clothing and shoes.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

More
Less

Handling and Storage

Storage

Keep containers tightly closed. Store in a cool, dry area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Do not get in eyes, on skin, or on clothing. Do not ingest or inhale. Use only in a chemical fume hood. Do not breathe dust.

More
Less

Hazards Identification

Inhalation

May cause effects similar to those described for ingestion. May produce cardiac failure and pulmonary edema.

Skin

May be harmful if absorbed through the skin. Causes severe skin irritation and possible burns.

Eyes

Causes eye irritation and possible burns.

Ingestion

May be harmful if swallowed. May cause rapid heartbeat and cardiac arrythmias. May cause liver injury, pulmonary edema, and respiratory arrest. May cause gastrointestinal disturbances such as nausea.

UN (DOT)

1325

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves and clothing to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

Prolonged or repeated skin contact may cause defatting and dermatitis.

Poison Class

3

More
Less

Fire Fighting Measures

Flash Point

168

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.

Upper exp. limit

3.9

Lower exp. limit

.6

Fire Potential

This material is probably combustible.

More
Less

Accidental Release Measures

Small spills/leaks

Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.

More
Less

Stability and Reactivity

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents.

Decomposition

Carbon monoxide, carbon dioxide, acrid smoke and fumes.

Combustion Products

Fire may produce irritating and/or toxic gases.

More
Less

Transport Information

UN Number

1325

Hazard Class

4.1

Packing Group

II; III

More
Less

ContactMore

Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Fax
021-67121385
WebSite
https://www.tcichemicals.com/CN/zh/
Energy Chemical
Tel
021-021-58432009
Fax
021-58436166
WebSite
http://www.energy-chemical.com
Chemsky(shanghai)International Co.,Ltd.
Tel
021-50135380
WebSite
http://www.shchemsky.com
Shandong Xiya Chemical Co., Ltd
Tel
4009903999
Fax
0539-6365991
WebSite
http://www.xiyashiji.com