Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > Curcuma oil > Curcuma oil(8024-37-1)

Curcuma oil(8024-37-1)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
More
Less

Product Identification

Product Name

Curcuma oil

Synonyms

Curcuma longa oils
Oil of turmeric
Oils, curcuma
Turmeric oil
Turmeric oleoresin

CAS

8024-37-1

RTECS

GS3774080

RTECS Class

Tumorigen; Mutagen; Primary Irritant

Beilstein/Gmelin

NA

More
Less

Physical and Chemical Properties

Appearance

Yellow to yellow-orange powder. Aromatic pepper-like, somewhat bitter taste.

More
Less

First Aid Measures

Ingestion

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.

Inhalation

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.

Skin

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.

Eyes

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

More
Less

Handling and Storage

Storage

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

Handling

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

More
Less

Exposure Controls/Personal Protection

Personal Protection

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.

Respirators

Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.

Exposure Effects

The toxicological properties of this material have not been investigated.

More
Less

Fire Fighting Measures

Fire Fighting

Fires involving this compound should be controlled with a dry chemical, carbon dioxide or Halon extinguisher.

More
Less

Accidental Release Measures

Small spills/leaks

If a spill of this chemical occurs, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with acetone and transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

More
Less

Stability and Reactivity

Stability

No data.

Incompatibilities

Sensitive to light, oxidation and pH changes.

More
Less

ContactMore

Jishui County Yikang Natural Flavor Oil Refinery
Tel
0796-0796-8128936
Fax
0796-8128936
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList1605677/0.htm
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
Adamas Reagent, Ltd.
Tel
400-6009262
Fax
021-64823266
WebSite
http://www.tansoole.com
ShangHai YuanYe Biotechnology Co., Ltd.
Tel
021-61312847
Fax
021-55068248
WebSite
http://www.shyuanye.com
Shaanxi Pioneer Biotech Co., Ltd.
Tel
13720616393;029-84385017-8003
Fax
029-84385017
WebSite
http://www.pioneerbiotech.com