Product Identification

Product Name

Trimethylsilylacetylene

Synonyms

Silane, ethynyltrimethyl-

CAS

1066-54-2

Formula

C5H10Si

Molecular Weight

98.22

EINECS

213-919-9

Beilstein/Gmelin

906752

Beilstein Reference

4-04-00-03937

EC Class

highly flammable

Physical and Chemical Properties

Appearance

Clear, colorless liquid.

Solubility in water

Soluble

Boiling Point

53

Density

0.7111 g/cm3 (20 C)

Refractive Index

1.39 (20 C)

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Refrigerator/flammables.

Handling

Wash thoroughly after handling. Use with adequate ventilation. Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion

The toxicological properties of this substance have not been fully investigated.

Inhalation

Inhalation of vapor may cause respiratory tract irritation.

Skin

Causes skin irritation.

Eyes

Causes eye irritation.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

EC Risk Phrase

R 11

EC Safety Phrase

S 16 23 29 33

UN (DOT)

1993

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point

-34

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Extremely flammable liquid. Containers may explode when heated. Extinguishing media: Use water spray to cool fire-exposed containers. Water may be ineffective. In case of fire use water spray, dry chemical, carbon dioxide, or chemical foam. Do NOT use straight streams of water. Cool containers with flooding quantities of water until well after fire is out.

Fire Potential

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. Provide ventilation. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces.

Stability and Reactivity

Stability

Materials containing similar functional groups can decompose at elevated temperatures. Has not been fully evaluated.

Incompatibilities

Strong oxidizing agents.

Decomposition

Carbon monoxide, carbon dioxide, silicon oxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number

1993

Hazard Class

3

Packing Group

I; II; III

HS Code

2931 00 95