Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 1-Methoxy-4-((E)-propenyl)-benzene > 1-Methoxy-4-((E)-propenyl)-benzene(4180-23-8)

1-Methoxy-4-((E)-propenyl)-benzene(4180-23-8)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

1-Methoxy-4-((E)-propenyl)-benzene

Synonyms

(E)-Anethol
1-Methoxy-4-[(1E)-1-propenyl]benzene
trans-1-(4-Methoxyphenyl)-1-propene
trans-1-Methoxy-4-(1-propenyl)benzene
trans-1-p-Anisylpropene
trans-Anethole

CAS

4180-23-8

Formula

C10H12O

Molecular Weight

148.21

EINECS

224-052-0

RTECS

BZ9275000

RTECS Class

Tumorigen; Drug; Mutagen; Reproductive Effector

Beilstein/Gmelin

636190

Beilstein Reference

4-06-00-03796

More
Less

Physical and Chemical Properties

Appearance

Clear, colorless liquid. Licorice aroma.

Solubility in water

Insoluble

Melting Point

21 - 23

Boiling Point

236

Vapor Pressure

0.07 (25 C)

Density

0.9883 g/cm3 (20 C)

Partition Coefficient

3.17

Heat Of Vaporization

45.5 kJ/mol

Usage

Flavoring.

Refractive Index

1.5539 (20 C)

More
Less

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Skin

Get medical aid immediately. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Ingestion

May cause irritation of the digestive tract.

Inhalation

May cause respiratory tract irritation.

Skin

May cause skin irritation.

Eyes

Causes severe eye irritation. May cause eye injury.

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Poison Class

4 (Substances and products that must be considered harmful)

More
Less

Fire Fighting Measures

Flash Point

91

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Combustible Liquid. Extinguishing media: Use agent most appropriate to extinguish fire.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition.

More
Less

Stability and Reactivity

Disposal Code

1

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents.

Decomposition

Carbon monoxide, carbon dioxide.

More
Less

Transport Information

HS Code

2909 30 90

More
Less

ContactMore

Ji 'an trillion spice oil co. LTD
Tel
0796-0796-8110986
WebSite
http://www.jawyxl.com/
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
Chembest Research Laboratories Limited
Tel
+86-21-20908456
Fax
021-58180499
WebSite
http://www.BioChemBest.com
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
WebSite
http://chemicals.thermofisher.cn