Benzyltrimethylammonium hydroxide(100-85-6)
Product Identification
Product Name
Benzyltrimethylammonium hydroxide
Synonyms
Benzenemethanaminium, N,N,N-trimethyl-, hydroxide
Benzyltrimethylammonium hydroxide
Benzyl-trimethylazanium hydroxide
N,N,N-Trimethylbenzenemethanaminium hydroxide
Sumquat 2311
Triton B
CAS
100-85-6
Formula
C10H17NO
Molecular Weight
167.25
EINECS
202-895-5
RTECS
BO8575000
RTECS Class
Drug
Beilstein/Gmelin
3917256
Beilstein Reference
4-12-00-02162
First Aid Measures
Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Remove contaminated clothing and shoes. Destroy contaminated shoes.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).
Handling and Storage
Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Flammables-area.
Handling
Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Use with adequate ventilation. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Hazards Identification
Ingestion
May cause severe gastrointestinal tract irritation with nausea, vomiting and possible burns.
Inhalation
May cause severe irritation of the respiratory tract with possible burns. Vapors may cause dizziness or suffocation.
Skin
Causes skin burns.
Eyes
Causes eye burns.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
EC Risk Phrase
R 11 23/25 34
EC Safety Phrase
S 16 26 36/37/39 45
UN (DOT)
2924
Exposure Controls/Personal Protection
Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Fire Fighting Measures
Flash Point
15
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water.
Fire Potential
Flammable/combustible material. May be ignited by heat, sparks or flames.
Accidental Release Measures
Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.
ContactMore
- Tel
- 13047189721 15572493761
- WebSite
- http://www.jmdongxin.cn/
- Tel
- 010-82848833
- Fax
- 86-10-82849933
- WebSite
- http://www.jkchemical.com
- Tel
- 021-61259108
- Fax
- 86-21-61259102
- WebSite
- https://www.meryer.com/cn/index/
- Tel
- 821-50328103-801
- Fax
- 86-21-50328109
- WebSite
- https://www.chemicalbook.com/ShowSupplierProductsList13285/0.htm
- Tel
- 400-6106006
- Fax
- 021-67582001/03/05
- WebSite
- http://chemicals.thermofisher.cn