Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 4-Aminobenzenesulfonyl fluoride > 4-Aminobenzenesulfonyl fluoride(98-62-4)

4-Aminobenzenesulfonyl fluoride(98-62-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

4-Aminobenzenesulfonyl fluoride

Synonyms

(p-Fluorosulfonyl)aniline
4-(Fluorosulfonyl)aniline
4-Aminobenzenesulfonyl fluoride
p-Sulfanilyl fluoride

CAS

98-62-4

Formula

C6H6FNO2S

Molecular Weight

175.17

EINECS

202-687-4

Merck

12,9099

Beilstein/Gmelin

2209488

Beilstein Reference

4-14-00-02658

More
Less

Physical and Chemical Properties

Appearance

White or yellow-white solid.

Solubility in water

Slightly soluble

Melting Point

71 - 72

pKa/pKb

13.66 (pKb)

Usage

Substance is used in the prepn of dyes which pick up light readily.

More
Less

First Aid Measures

Ingestion

Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.

Skin

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.

Eyes

Get medical aid. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

More
Less

Handling and Storage

Storage

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Do not store in metal containers. Store protected from moisture.

Handling

Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam.

More
Less

Hazards Identification

Ingestion

May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. The toxicological properties of this substance have not been fully investigated.

Inhalation

May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated.

Skin

Causes skin burns.

Eyes

Causes eye burns.

Hazards

Contact with metals may evolve flammable hydrogen gas.

UN (DOT)

1690

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

More
Less

Fire Fighting Measures

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Contact with metals may evolve flammable hydrogen gas. Extinguishing media: Use agent most appropriate to extinguish fire. Do NOT get water inside containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Fire Potential

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

More
Less

Accidental Release Measures

Small spills/leaks

Vacuum or sweep up material and place into a suitable disposal container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation. Do not get water inside containers.

More
Less

Stability and Reactivity

Incompatibilities

Moisture, strong bases, strong oxidizing agents.

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Decomposition

Carbon monoxide, oxides of nitrogen, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, fluoride fumes.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

1690

Hazard Class

6.1

Packing Group

III

More
Less

ContactMore

Shanghai potentpharm CO.,Ltd
Fax
(86) 21 51969655, QQ: 263541193
WebSite
http://www.potentpharm.com
Bide Pharmatech Ltd.
Tel
400-164-7117
Fax
+86-21-61629029
WebSite
http://www.bidepharm.com
Jiangsu Aikon Biopharmaceutical R&D co.,Ltd.
Tel
025-66113011
WebSite
http://www.aikonchem.com
Shanghai Yinlin Pharmaceutical Co., Ltd.
Tel
021-33690831
Fax
021-33690831
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList30645/0.htm
Henan Alpha Chemical Co., Ltd.
Tel
0371-0371-55055611
Fax
QQ:3002694073
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList31206/0.htm