Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Allylpalladium chloride dimer > Allylpalladium chloride dimer(12012-95-2)

Allylpalladium chloride dimer(12012-95-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

Allylpalladium chloride dimer

Synonyms

Bis(allyl)dichlorodipalladium
Bis(allylchloropalladium)
Diallyldichlorodipalladium
Palladium, di-m-chlorobis(h3-2-propenyl)di-

CAS

12012-95-2

Formula

C6H10Cl2Pd2

Molecular Weight

365.85

EINECS

234-579-8

RTECS

RT3510000

RTECS Class

Organometallic; Primary Irritant

Beilstein/Gmelin

4124623

EC Class

irritant

More
Less

Physical and Chemical Properties

Appearance

Yellow crystalline powder.

Solubility in water

Insoluble

Melting Point

160

Usage

Catalyst used in organic synthesis.

More
Less

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Do not expose to air. Store protected from moisture. Store under an inert atmosphere.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Use with adequate ventilation. Handle under an inert atmosphere. Store protected from air. Do not allow contact with water. Use only in a chemical fume hood. Keep from contact with moist air and steam. Do not breathe dust.

More
Less

Hazards Identification

Inhalation

Causes respiratory tract irritation. May cause burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. Can produce delayed pulmonary edema.

Skin

Causes severe skin irritation.

Eyes

Causes eye irritation. May cause chemical conjunctivitis.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.

EC Risk Phrase

R 36/37/38

EC Safety Phrase

S 26 36

UN (DOT)

1759

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

Effects may be delayed.

More
Less

Fire Fighting Measures

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Do NOT get water inside containers. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

More
Less

Accidental Release Measures

Small spills/leaks

Clean up spills immediately, using the appropriate protective equipment. Sweep up, then place into a suitable container for disposal. Provide ventilation. Place under an inert atmosphere. Do not get water inside containers.

More
Less

Stability and Reactivity

Disposal Code

27

Stability

Stable at room temperature in closed containers under normal storage and handling conditions. May decompose on exposure to moist air or water.

Incompatibilities

Strong oxidizing agents, moisture, air.

Decomposition

Hydrogen chloride, carbon monoxide, carbon dioxide, chloride fumes.

More
Less

Transport Information

UN Number

1759

HS Code

2843 90 90

More
Less

ContactMore

Guiyan Chemical Materials (Yunnan) Co., LTD
WebSite
http://www.sino-platinum.com.cn
LaaJoo
Tel
021-60702684
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList20079/0_EN.htm
Shaanxi Rock New Materials Co., Ltd.
Tel
0917-8888777, 3380777,18691786767;
WebSite
http://www.bjrock.com/
Nanjin Cynthia chemicals Technology Co.,Ltd
Tel
0550-5618439
Fax
0550-5610690
WebSite
http://www.cynthiachem.com
Yunnan Precious Metals Laboratory Co., Ltd
Tel
871-15559856
Fax
0871-68329797